Literaturverzeichnis
449
324. Laprie, J.C. (ed.): Dependability: basic concepts and terminology in English, French, German,
Italian and Japanese. IFIP WG 10.4, Dependable Computing and Fault Tolerance, In: volume
5 of Dependable computing and fault tolerant systems, Springer Verlag (1992)
325. Latendresse, M.: The code compression bibliography. http://www.iro.umontreal.ca/~latendre/
compactBib (2004)
326. Law, A.M.: Simulation Modeling & Analysis. McGraw-Hill (2006)
327. Lawler, E.L.: Optimal sequencing of a single machine subject to precedence constraints.
Managements Science, Vol. 19 pp. 544–546 (1973)
328. Le Boudec, J., Thiran, P.: Network Calculus. Springer, LNCS # 2050 (2001)
329. Lee, E.A.: Embedded software – an agenda for research. Tech. rep., UCB ERL Memorandum
M99/63 (1999)
330. Lee, E.A.: The future of embedded software. ARTEMIS Conference, Graz, http://ptolemy.
eecs.berkeley.edu/presentations/06/FutureOfEmbeddedSoftware_Lee_Graz.ppt (2006)
331. Lee, E.A.: Computing foundations and practice for cyber-physical systems: A preliminary report. Tech. Rep. UCB/EECS-2007-72, EECS Department, University of California, Berkeley
(2007). URL http://www.eecs.berkeley.edu/Pubs/TechRpts/2007/EECS-2007-72.html
332. Lee, E.A.: Leveraging synchronized clocks in cyber-physical systems. Workshop on
Synchronization in Telecommunications Systems, http://www.atis.org/wsts/papers/3-3-1_
UCBerkeley_Lee_LeveragingClocks.pdf (2014)
333. Lee, E.A.: Absolutely positively on time. IEEE Computer (July, 2005)
334. Lee, E.A., Messerschmitt, D.: Synchronous data flow. Proc. of the IEEE, vol. 75 pp. 1235–
1245 (1987)
335. Lee, E.A., Seshia, S.A.: Introduction to Embedded Systems, A Cyber-Physical Systems
Approach, 2 edn. MIT Press, http://LeeSeshia.org (2017)
336. Lee, S., Gerstlauer, A.: Fine grain word length optimization for dynamic precision scaling in
DSP systems. In: VLSI-SoC, pp. 266–271 (2013)
337. Lelli, J., Scordino, C., Abeni, L., Faggioli, D.: Deadline scheduling in the Linux kernel.
Software: Practice and Experience 46(6), 821–839 (2016). DOI 10.1002/spe.2335. URL
http://dx.doi.org/10.1002/spe.2335. Spe.2335
338. Leupers, R.: Retargetable Code Generation for Digital Signal Processors. Kluwer Academic
Publishers (1997)
339. Leupers, R.: Code Optimization Techniques for Embedded Processors - Methods, Algorithms,
and Tools. Kluwer Academic Publishers (2000)
340. Leveson, N.: Safeware, System Safety and Computers. Addison Wesley (1995)
341. Levine, D.: Users guide to the PGAPack parallel genetic algorithm library. Tech. Rep.
ANL-95/18, Tech. Rep. Argonne National Lab. (1996)
342. Lewis, J., Rashba, E., Brophy, D.: VHDL-2006-D3.0 Tutorial. Tutorial at Design, Automation,
and Test in Europe (DATE), http://www.amos.eguru-il.com/vhdl_info/date_vhdl_tutorial.pdf
(2007)
343. Li, L., Wu, H., Feng, H., Xue, J.: Towards Data Tiling for Whole Programs in Scratchpad
Memory Allocation. In: Proceedings of the Asia-Pacific Conference on Advances in Computer
Systems Architecture (ACSAC), pp. 63–74. Springer, Berlin, Heidelberg (2007). DOI
10.1007/978-3-540-74309-5_8
344. Li, Y.T., Malik, S.: Performance analysis of embedded software using implicit path enumeration. ACM SIGPLAN Notices 30 (1995)
345. Li, Z.R. (ed.): Organic light-emitting materials and devices. CRC Press (2015)
346. Liebisch, D.C., Jain, A.: Jessi common framework design management: the means to configuration and execution of the design process. In: Conf. on European Design Automation
(EURO-DAC), pp. 552–557. IEEE Computer Society Press (1992)
347. LIN Consortium: LIN Specification Package - Revision 2.2A. https://www.cs-group.de/wpcontent/uploads/2016/11/LIN_Specification_Package_2.2A.pdf (2010)
348. Liu, C.L., Layland, J.W.: Scheduling algorithms for multi-programming in a hard real-time
environment. Journal of the Association for Computing Machinery (JACM) pp. 40–61 (1973)
349. Liu, J.W.: Real-Time Systems. Prentice Hall (2000)
449
324. Laprie, J.C. (ed.): Dependability: basic concepts and terminology in English, French, German,
Italian and Japanese. IFIP WG 10.4, Dependable Computing and Fault Tolerance, In: volume
5 of Dependable computing and fault tolerant systems, Springer Verlag (1992)
325. Latendresse, M.: The code compression bibliography. http://www.iro.umontreal.ca/~latendre/
compactBib (2004)
326. Law, A.M.: Simulation Modeling & Analysis. McGraw-Hill (2006)
327. Lawler, E.L.: Optimal sequencing of a single machine subject to precedence constraints.
Managements Science, Vol. 19 pp. 544–546 (1973)
328. Le Boudec, J., Thiran, P.: Network Calculus. Springer, LNCS # 2050 (2001)
329. Lee, E.A.: Embedded software – an agenda for research. Tech. rep., UCB ERL Memorandum
M99/63 (1999)
330. Lee, E.A.: The future of embedded software. ARTEMIS Conference, Graz, http://ptolemy.
eecs.berkeley.edu/presentations/06/FutureOfEmbeddedSoftware_Lee_Graz.ppt (2006)
331. Lee, E.A.: Computing foundations and practice for cyber-physical systems: A preliminary report. Tech. Rep. UCB/EECS-2007-72, EECS Department, University of California, Berkeley
(2007). URL http://www.eecs.berkeley.edu/Pubs/TechRpts/2007/EECS-2007-72.html
332. Lee, E.A.: Leveraging synchronized clocks in cyber-physical systems. Workshop on
Synchronization in Telecommunications Systems, http://www.atis.org/wsts/papers/3-3-1_
UCBerkeley_Lee_LeveragingClocks.pdf (2014)
333. Lee, E.A.: Absolutely positively on time. IEEE Computer (July, 2005)
334. Lee, E.A., Messerschmitt, D.: Synchronous data flow. Proc. of the IEEE, vol. 75 pp. 1235–
1245 (1987)
335. Lee, E.A., Seshia, S.A.: Introduction to Embedded Systems, A Cyber-Physical Systems
Approach, 2 edn. MIT Press, http://LeeSeshia.org (2017)
336. Lee, S., Gerstlauer, A.: Fine grain word length optimization for dynamic precision scaling in
DSP systems. In: VLSI-SoC, pp. 266–271 (2013)
337. Lelli, J., Scordino, C., Abeni, L., Faggioli, D.: Deadline scheduling in the Linux kernel.
Software: Practice and Experience 46(6), 821–839 (2016). DOI 10.1002/spe.2335. URL
http://dx.doi.org/10.1002/spe.2335. Spe.2335
338. Leupers, R.: Retargetable Code Generation for Digital Signal Processors. Kluwer Academic
Publishers (1997)
339. Leupers, R.: Code Optimization Techniques for Embedded Processors - Methods, Algorithms,
and Tools. Kluwer Academic Publishers (2000)
340. Leveson, N.: Safeware, System Safety and Computers. Addison Wesley (1995)
341. Levine, D.: Users guide to the PGAPack parallel genetic algorithm library. Tech. Rep.
ANL-95/18, Tech. Rep. Argonne National Lab. (1996)
342. Lewis, J., Rashba, E., Brophy, D.: VHDL-2006-D3.0 Tutorial. Tutorial at Design, Automation,
and Test in Europe (DATE), http://www.amos.eguru-il.com/vhdl_info/date_vhdl_tutorial.pdf
(2007)
343. Li, L., Wu, H., Feng, H., Xue, J.: Towards Data Tiling for Whole Programs in Scratchpad
Memory Allocation. In: Proceedings of the Asia-Pacific Conference on Advances in Computer
Systems Architecture (ACSAC), pp. 63–74. Springer, Berlin, Heidelberg (2007). DOI
10.1007/978-3-540-74309-5_8
344. Li, Y.T., Malik, S.: Performance analysis of embedded software using implicit path enumeration. ACM SIGPLAN Notices 30 (1995)
345. Li, Z.R. (ed.): Organic light-emitting materials and devices. CRC Press (2015)
346. Liebisch, D.C., Jain, A.: Jessi common framework design management: the means to configuration and execution of the design process. In: Conf. on European Design Automation
(EURO-DAC), pp. 552–557. IEEE Computer Society Press (1992)
347. LIN Consortium: LIN Specification Package - Revision 2.2A. https://www.cs-group.de/wpcontent/uploads/2016/11/LIN_Specification_Package_2.2A.pdf (2010)
348. Liu, C.L., Layland, J.W.: Scheduling algorithms for multi-programming in a hard real-time
environment. Journal of the Association for Computing Machinery (JACM) pp. 40–61 (1973)
349. Liu, J.W.: Real-Time Systems. Prentice Hall (2000)