4.2 Operation Norms of Facilities for Treating Rural Domestic …
113
2. The protecting layers for side slops in the sites and facilities for seepage-proofing,
drainage, and so on in the regions to be filled should be regularly checked and
maintained.
3. Pipes, wells, and pools in the waste landfill sites need to be checked and
maintained regularly.
4. If machines need to be retained in waste landfill sites for more than one week,
corrodible parts such as tracks and compacting teeth should be subjected to
anticorrosive and rust-proof treatment.
5. Eradication devices and drugs should be maintained and supplemented regularly,
respectively.
6. Regular check and maintenance needs to be conducted for facilities such as
monitoring wells in the waste landfill sites.
7. Facilities in the waste landfill sites should be clean, and the ground is required
to be clean and flat.
4.2.5.3 Safety Operation
1. Safety warning marks should be set in the waste landfill sites.
2. Operation and management personnel need to have safety education and manoeuvre for fire prevention and explosion prevention regularly and be regularly
inspected and examined.
3. No enclosed buildings and structures are allowed to be constructed in the
operation region of waste landfill sites.
4. Safety measures should be taken as soon as possible once the methane
concentration exceeds the limit in the sites.
5. Machines should be operated without faults.
6. Specific personnel should be on duty during heavy rain and storm to inspect
the drainage of the drainage system. Once the facilities are found damaged or
blocked, personnel should be organized in time to dispose the issue.
4.2.6 Operation Technology of Composting Equipment
4.2.6.1 Operation Management
1. Mechanical separation
Before operation of plate-type feeders, the material inlet should be checked in case it
is clamped. The operating conditions of the material inlet and the electromechanical
device should be monitored continuously during the operation process. In case of a
fault, the machine should be turned off immediately and maintained.
Belt conveyors should have borders higher than 15 cm.
113
2. The protecting layers for side slops in the sites and facilities for seepage-proofing,
drainage, and so on in the regions to be filled should be regularly checked and
maintained.
3. Pipes, wells, and pools in the waste landfill sites need to be checked and
maintained regularly.
4. If machines need to be retained in waste landfill sites for more than one week,
corrodible parts such as tracks and compacting teeth should be subjected to
anticorrosive and rust-proof treatment.
5. Eradication devices and drugs should be maintained and supplemented regularly,
respectively.
6. Regular check and maintenance needs to be conducted for facilities such as
monitoring wells in the waste landfill sites.
7. Facilities in the waste landfill sites should be clean, and the ground is required
to be clean and flat.
4.2.5.3 Safety Operation
1. Safety warning marks should be set in the waste landfill sites.
2. Operation and management personnel need to have safety education and manoeuvre for fire prevention and explosion prevention regularly and be regularly
inspected and examined.
3. No enclosed buildings and structures are allowed to be constructed in the
operation region of waste landfill sites.
4. Safety measures should be taken as soon as possible once the methane
concentration exceeds the limit in the sites.
5. Machines should be operated without faults.
6. Specific personnel should be on duty during heavy rain and storm to inspect
the drainage of the drainage system. Once the facilities are found damaged or
blocked, personnel should be organized in time to dispose the issue.
4.2.6 Operation Technology of Composting Equipment
4.2.6.1 Operation Management
1. Mechanical separation
Before operation of plate-type feeders, the material inlet should be checked in case it
is clamped. The operating conditions of the material inlet and the electromechanical
device should be monitored continuously during the operation process. In case of a
fault, the machine should be turned off immediately and maintained.
Belt conveyors should have borders higher than 15 cm.