References
Agrawal RC, Chandra A (2007) Ion transport and electrochemical cell performance studies on hotpress-synthesized Ag+ ion conducting electroactive polymeric membranes:(1À x) PEO: x [0.7
(0.75 AgI: 0.25 AgCl): 0.3 MI]. J Phys D Appl Phys 40(22):7024
Ahmed S, Mehmood M, Iqbal R (2010) Influence of dioctyl phthalate (DOP) on the mechanical,
optical and thermal properties of formulations for the industrial manufacture of radiation
sterilizable medical disposables. Radiat Phys Chem 79:339–342
Armand M, Tarascon JM (2008) Building better batteries. Nature 451(7179):652–657
Arora P, Zhang Z (2004) Battery separators. Chem Rev 104(10):4419–4462
Arya A, Sharma AL (2016) Conductivity and stability properties of solid polymer electrolyte based
on PEO-PAN+LiPF6 for energy storage. Appl Sci Lett 2:72–75
Arya A, Sharma AL (2017a) Polymer electrolytes for lithium ion batteries: a critical study. Ionics
23:497–540
Arya A, Sharma AL (2017b) Insights into the use of polyethylene oxide in energy storage/
conversion devices: a critical review. J Phys D Appl Phys 50(44):443002
Arya A, Sharma AL (2017c) Effect of variation of different nanofillers on structural, electrical,
dielectric, and transport properties of blend polymer nanocomposites. Ionics 24(8):2295–2319.
https://doi.org/10.1007/s11581-017-2364-7
Arya A, Sharma AL (2018) Optimization of salt concentration and explanation of two
peak percolation in blend solid polymer nanocomposite films. J Solid State Electrochem
22(9):2725–2745
Baril D, Michot C, Armand M (1997) Electrochemistry of liquids vs. solids: polymer electrolytes.
Solid State Ionics 94(1–4):35–47
Bhattacharya M (2016) Polymer nanocomposites – a comparison between carbon nanotubes,
graphene, and clay as nanofillers. Materials 9(4):262
Brinker CJ, Hurd AJ (1994) Fundamentals of sol-gel dip-coating. J Phys III 4(7):1231–1242
Celzard A, McRae E, Deleuze C, Dufort M, Furdin G, Marêché JF (1996) Critical concentration in
percolating systems containing a high-aspect-ratio filler. Phys Rev B 53(10):6209
Chen B, Evans JR, Greenwell HC, Boulet P, Coveney PV, Bowden AA, Whiting A (2008) A
critical appraisal of polymer–clay nanocomposites. Chem Soc Rev 37(3):568–594
Cheng XB, Zhang R, Zhao CZ, Zhang Q (2017) Toward safe lithium metal anode in rechargeable
batteries: a review. Chem Rev 117(15):10403–10473
Choudhary S, Sengwa RJ (2014) Intercalated clay structures and amorphous behavior of solution
cast and melt pressed poly (ethylene oxide)–clay nanocomposites. J Appl Polym Sci 131(4).
https://doi.org/10.1002/app.39898
Dam T, Karan NK, Thomas R, Pradhan DK, Katiyar RS (2015) Observation of ionic transport and
ion-coordinated segmental motions in composite (polymer-salt-clay) solid polymer electrolyte.
Ionics 21(2):401–410
Deng D (2015) Li-ion batteries: basics, progress, and challenges. Energy Sci Eng 3(5):385–418
Dhatarwal P, Sengwa RJ, Choudhary S (2017) Effect of intercalated and exfoliated montmorillonite
clay on the structural, dielectric and electrical properties of plasticized nanocomposite solid
polymer electrolytes. Composit Commun 5:1–7
Do NST, Schaetzl DM, Dey B, Seabaugh AC, Fullerton-Shirey SK (2012) Influence of Fe2O3
nanofiller shape on the conductivity and thermal properties of solid polymer electrolytes:
nanorods versus nanospheres. J Phys Chem C 116(40):21216–21223
Erceg M, Jozić D, Banovac I, Perinović S, Bernstorff S (2014) Preparation and characterization of
melt intercalated poly (ethylene oxide)/lithium montmorillonite nanocomposites. Thermochim
Acta 579:86–92
Fan L, Nan CW, Dang Z (2002) Effect of modified montmorillonites on the ionic conductivity of
(PEO)16LiClO4 electrolytes. Electrochim Acta 47(21):3541–3544
Fu X, Yu D, Zhou J, Li S, Gao X, Han Y et al (2016) Inorganic and organic hybrid solid electrolytes
for lithium-ion batteries. Cryst Eng Commun 18(23):4236–4258
312
A. Arya and A. L. Sharma
Agrawal RC, Chandra A (2007) Ion transport and electrochemical cell performance studies on hotpress-synthesized Ag+ ion conducting electroactive polymeric membranes:(1À x) PEO: x [0.7
(0.75 AgI: 0.25 AgCl): 0.3 MI]. J Phys D Appl Phys 40(22):7024
Ahmed S, Mehmood M, Iqbal R (2010) Influence of dioctyl phthalate (DOP) on the mechanical,
optical and thermal properties of formulations for the industrial manufacture of radiation
sterilizable medical disposables. Radiat Phys Chem 79:339–342
Armand M, Tarascon JM (2008) Building better batteries. Nature 451(7179):652–657
Arora P, Zhang Z (2004) Battery separators. Chem Rev 104(10):4419–4462
Arya A, Sharma AL (2016) Conductivity and stability properties of solid polymer electrolyte based
on PEO-PAN+LiPF6 for energy storage. Appl Sci Lett 2:72–75
Arya A, Sharma AL (2017a) Polymer electrolytes for lithium ion batteries: a critical study. Ionics
23:497–540
Arya A, Sharma AL (2017b) Insights into the use of polyethylene oxide in energy storage/
conversion devices: a critical review. J Phys D Appl Phys 50(44):443002
Arya A, Sharma AL (2017c) Effect of variation of different nanofillers on structural, electrical,
dielectric, and transport properties of blend polymer nanocomposites. Ionics 24(8):2295–2319.
https://doi.org/10.1007/s11581-017-2364-7
Arya A, Sharma AL (2018) Optimization of salt concentration and explanation of two
peak percolation in blend solid polymer nanocomposite films. J Solid State Electrochem
22(9):2725–2745
Baril D, Michot C, Armand M (1997) Electrochemistry of liquids vs. solids: polymer electrolytes.
Solid State Ionics 94(1–4):35–47
Bhattacharya M (2016) Polymer nanocomposites – a comparison between carbon nanotubes,
graphene, and clay as nanofillers. Materials 9(4):262
Brinker CJ, Hurd AJ (1994) Fundamentals of sol-gel dip-coating. J Phys III 4(7):1231–1242
Celzard A, McRae E, Deleuze C, Dufort M, Furdin G, Marêché JF (1996) Critical concentration in
percolating systems containing a high-aspect-ratio filler. Phys Rev B 53(10):6209
Chen B, Evans JR, Greenwell HC, Boulet P, Coveney PV, Bowden AA, Whiting A (2008) A
critical appraisal of polymer–clay nanocomposites. Chem Soc Rev 37(3):568–594
Cheng XB, Zhang R, Zhao CZ, Zhang Q (2017) Toward safe lithium metal anode in rechargeable
batteries: a review. Chem Rev 117(15):10403–10473
Choudhary S, Sengwa RJ (2014) Intercalated clay structures and amorphous behavior of solution
cast and melt pressed poly (ethylene oxide)–clay nanocomposites. J Appl Polym Sci 131(4).
https://doi.org/10.1002/app.39898
Dam T, Karan NK, Thomas R, Pradhan DK, Katiyar RS (2015) Observation of ionic transport and
ion-coordinated segmental motions in composite (polymer-salt-clay) solid polymer electrolyte.
Ionics 21(2):401–410
Deng D (2015) Li-ion batteries: basics, progress, and challenges. Energy Sci Eng 3(5):385–418
Dhatarwal P, Sengwa RJ, Choudhary S (2017) Effect of intercalated and exfoliated montmorillonite
clay on the structural, dielectric and electrical properties of plasticized nanocomposite solid
polymer electrolytes. Composit Commun 5:1–7
Do NST, Schaetzl DM, Dey B, Seabaugh AC, Fullerton-Shirey SK (2012) Influence of Fe2O3
nanofiller shape on the conductivity and thermal properties of solid polymer electrolytes:
nanorods versus nanospheres. J Phys Chem C 116(40):21216–21223
Erceg M, Jozić D, Banovac I, Perinović S, Bernstorff S (2014) Preparation and characterization of
melt intercalated poly (ethylene oxide)/lithium montmorillonite nanocomposites. Thermochim
Acta 579:86–92
Fan L, Nan CW, Dang Z (2002) Effect of modified montmorillonites on the ionic conductivity of
(PEO)16LiClO4 electrolytes. Electrochim Acta 47(21):3541–3544
Fu X, Yu D, Zhou J, Li S, Gao X, Han Y et al (2016) Inorganic and organic hybrid solid electrolytes
for lithium-ion batteries. Cryst Eng Commun 18(23):4236–4258
312
A. Arya and A. L. Sharma