32
Nguyen-V-Hung, Balingbing C, Quilty J, Sander BO, Demont M, Gummert M (2017) Processing
rice straw and rice husk as co-products. In: Sasaki T (ed) Achieving sustainable cultivation of
rice, vol 2. Burleigh Dodds Science Publishing, Cambridge, pp 121–148
Rhen C, Gref R, Sjostrom M, Wasterlund I (2005) Effects of raw material moisture content, densification pressure and temperature on some properties of Norway spruce pellets. Fuel Process
Technol 87(1):11–16. https://doi.org/10.1016/j.fuproc.2005.03.003
Said N, Abdel daiem MM, Garcia-Maraver A, Zamorano M (2015) Influence of densification
parameters on quality properties of rice straw pellets. Fuel Process Technol 138:56–64
Sarkar N, Aikat K (2013) Kinetic study of acid hydrolysis of rice straw. Hindawi Publishing
Corporation. ISRN Biotechnology https://doi.org/10.5402/2013/170615
Tabil L, Adapa P, Kashaninejad M (2011) Biomass feedstock preprocessing–Part 2: Densification.
In Bernardes MADS (ed) Biofuel’s Engineering Process Technology, p. 439–464
Tumuluru JS (2014) Effect of process variables on the density and durability of the pellets made
from high moisture corn Stover. Biosyst Eng 119:44–57
Tumuluru JS, Wright CT, Kenny KL, Hess JR (2010) A review on biomass densification technologies for energy application. Idaho National Laboratory, Biofuels and Renewable
Energies Tehcnologies Department, Energy Systems and Technologies Division, Idaho
Falls, Idaho 83415. Available at https://pdfs.semanticscholar.org/305d/4fb8d8c782e40caa9
6847d555e02159b9c74.pdf
Wang D, Buckmster DR, Jiang Y, Hua J (2011) Experimental study on baling rice straw silage. Int
J Agric & Biol Eng 1. https://doi.org/10.3965/j.issn.1934-6344.2011.01.000-000
Whittaker C, Shield I (2017) Factors affecting wood, energy grass and straw pellet durability. A
review. Renew Sust Energ Rev 71:1–11
Open Access This chapter is licensed under the terms of the Creative Commons Attribution 4.0
International License (http://creativecommons.org/licenses/by/4.0/), which permits use, sharing,
adaptation, distribution and reproduction in any medium or format, as long as you give appropriate
credit to the original author(s) and the source, provide a link to the Creative Commons licence and
indicate if changes were made.
The images or other third party material in this chapter are included in the chapter’s Creative
Commons licence, unless indicated otherwise in a credit line to the material. If material is not
included in the chapter’s Creative Commons licence and your intended use is not permitted by
statutory regulation or exceeds the permitted use, you will need to obtain permission directly from
the copyright holder.
C. Balingbing et al.
Précédent

- 43/199

Suivant