materials, printing of basic colors, second layer/subsequent layers, drying, walking to the storage
of printed materials, all mostly done while standing or running 8 hours each day.
The priority in the development of this proposed design is to reduce musculoskeletal complaints
in the body with regard to Waist, Left Wrist, Right Thigh, Left Calf, Right Calf, Left Ankle, and
Right Ankle. Development of a new work equipment design is needed to consider the unbalanced
load reduction on the operator’s body, and the development of the temporary transport system when
the operator moves the work point so that it does not have an ill impact especially on the operator’s
hand. In addition, this new design attempts to reduce the standing required in the printing process
thereby lessening the stress on the operator’s body.
REFERENCES
Creswell, J.W. 2010. Research Design: Pendekatan Kualitatif, Kuantitatif, dan Mixed. (diterjemahkan oleh:
Achmad Fawaid). Yogyakarta: Pustaka Pelajar.
Herlambang, Y. et al. 2015. Penerapan Micromotion Study Dalam Analisis Produktivitas Desain Peralatan
Kerja Cetak Saring. Jurnal Teknologi Informasi dan Komunikasi (Tematik) PPM PLB. Bandung, 2:26–34.
Kroemer, K. et al. 2001. Ergonomic, how to design for ease and efficiency. 2nd edition. Prentice Hall, New
Jersey.
Pheasant, S. 1991. Ergonomics, Work and Health. London: Macmillan AcademicProfesional Ltd.
Manuaba, I.B.G. 1998. Ilmu Kebidanan, Penyakit Kandungan dan KB. EGC. Jakarta.
Santoso, et al. 2014. Perancangan Metode Kerja untuk Mengurangi Kelelahan Kerja pada Aktivitas Mesin
Bor di Workshop Bubut PT. Cahaya Samudra Shipyard. Profesiensi, 2(2):155–164.
Sobandi, B. 2004. Model Pembelajaran Kewirausahaan Sablon dalam Menumbuhkan Minat Wirausaha Santri
di Kecamatan Cisalak Kabupaten Subang. Bandung: Universitas Pendidikan Indonesia.
Tusianti, E. et al. 2019. Analisis Hasil SE2016 Lanjutan Potensi Peningkatan Kinerja Usaha Mikro Kecil.
Jakarta. Badan Pusat Statistik.
224
of printed materials, all mostly done while standing or running 8 hours each day.
The priority in the development of this proposed design is to reduce musculoskeletal complaints
in the body with regard to Waist, Left Wrist, Right Thigh, Left Calf, Right Calf, Left Ankle, and
Right Ankle. Development of a new work equipment design is needed to consider the unbalanced
load reduction on the operator’s body, and the development of the temporary transport system when
the operator moves the work point so that it does not have an ill impact especially on the operator’s
hand. In addition, this new design attempts to reduce the standing required in the printing process
thereby lessening the stress on the operator’s body.
REFERENCES
Creswell, J.W. 2010. Research Design: Pendekatan Kualitatif, Kuantitatif, dan Mixed. (diterjemahkan oleh:
Achmad Fawaid). Yogyakarta: Pustaka Pelajar.
Herlambang, Y. et al. 2015. Penerapan Micromotion Study Dalam Analisis Produktivitas Desain Peralatan
Kerja Cetak Saring. Jurnal Teknologi Informasi dan Komunikasi (Tematik) PPM PLB. Bandung, 2:26–34.
Kroemer, K. et al. 2001. Ergonomic, how to design for ease and efficiency. 2nd edition. Prentice Hall, New
Jersey.
Pheasant, S. 1991. Ergonomics, Work and Health. London: Macmillan AcademicProfesional Ltd.
Manuaba, I.B.G. 1998. Ilmu Kebidanan, Penyakit Kandungan dan KB. EGC. Jakarta.
Santoso, et al. 2014. Perancangan Metode Kerja untuk Mengurangi Kelelahan Kerja pada Aktivitas Mesin
Bor di Workshop Bubut PT. Cahaya Samudra Shipyard. Profesiensi, 2(2):155–164.
Sobandi, B. 2004. Model Pembelajaran Kewirausahaan Sablon dalam Menumbuhkan Minat Wirausaha Santri
di Kecamatan Cisalak Kabupaten Subang. Bandung: Universitas Pendidikan Indonesia.
Tusianti, E. et al. 2019. Analisis Hasil SE2016 Lanjutan Potensi Peningkatan Kinerja Usaha Mikro Kecil.
Jakarta. Badan Pusat Statistik.
224