225
Beyglou, A., 2016. On the Operational Efficiency in Open Pit Mines, Licentiate Thesis. Luleå: Luleå
Tekniska Universitet, Sweden. ISBN: 978-91-7583-699-7 (electronic).
Buyer, A. & Schubert, W., 2017. Calculation the Spacing of Discontinuities from 3D Point Clouds.
Proceedia Engineering 191(1): 270–278.
Ferrero, A.M., Forlani, G., Roncella, R. & Voyat, H.I., 2009. Advanced Geostructural Survey Methods
Applied to Rock Mass Characterization. Rock Mechanics and Rock Engineering 42(1): 631–665.
Firpo, G., Salvini, R., Francioni, M. & Ranjith, P.G., 2011. Use of Digital Terrestrial Photogrammetry
in Rocky Slope Stability Analysis by Distinct Elements Numerical Methods. International Journal of
Rock Mechanics & Mining Sciences 48(1): 1045–1054.
Gaich, A., Pötsch, M. & Schubert, W., 2006. Acquisition and Assessment of Geometric Rock Mass
Features by True 3D Images. In: The 41st U.S. Symposium on Rock Mechanics (USRMS), 17–21
June, 2006. Golden, Colorado: American Rock Mechanics Association.
Ghosh, R., Gustafson, A. & Schunnesson, H., 2018. Development of a Geological Model for Chargeability Assessment of Borehole using Drill monitoring Technique. International Journal of Rock
Mechanics and Mining Sciences 109(1): 9–18.
Ghosh, R., Schunnesson, H. & Gustafson, A., 2017. Monitoring of Drill System Behavior for WaterPowered In-The-Hole (ITH) Drilling. Minerals 7(121).
Haneberg, W.C., 2008. Using Close Range Terrestrial Digital Photogrammetry for 3D Rock Slope modelling and Discontinuity Mapping in the United States. Bulletin of Engineering Geology & Environment 67(4): 457–469.
Khorzoughi, M.B., 2013. Use of Measurement While Drilling Techniques for Improved Rock Mass Characterization in Open-Pit Mines, Master’s Thesis. Vancouver: University of British Columbia, Canada. DOI: 10.14288/1.0073823.
Khorzoughi, M.B., Hall, R. & Apel, D., 2018. Rock Fracture Density Characterization using Measurement While Drilling (MWD) Technique. International Journal of Mining Science and Technology
28(1): 859–864.
Leighton, J.C., 1982. Development of a Correlation between Rotary Drill Performance and Controlled
Blasting Powder Factors, Master’s Thesis. Vancouver: University of British Columbia, Canada. DOI:
10.14288/1.0095103.
Piyush, R., Schunnesson, H., Lindqvist, P.-A. & Kumar, U., 2016. Measurement-While-Drilling Technique and its Scope in Design and Prediction of Rock Blasting. International Journal of Mining Science and Technology 26(4): 711–719.
Rodgers, M., McVay, M., Horhota, D. & Hernando, J., 2018. Assessment of Rock Strength from Measuring While Drilling Shafts in Florida Limestone. Canadian Geotechnical Journal 55(8): 1154–1167.
Schunnesson, H., 1996. RQD Prediction Based on Drill Performance. Tunneling and Underground Space
Technology 11(3): 345–351.
Segui, J.B. & Higgins, M., 2002. Blast Design Using Measurement While Drilling Parameters. Fragblast:
International Journal for Blasting and Fragmentation 6(3–4): 287–299.
Sturzenegger, M. & Stead, D., 2009. Close-Range Terrestrial Digital Photogrammetry and Terrestrial
Laser Scanning for Discontinuity Characterization on Rock Cuts. Engineering Geology 106(1):
163–182.
Van Eldert, J., Schunnesson, H., Johansson, D. & Saiang, D., 2018. Measurement While Drilling
(MWD) Technology for Blasting Damage Calculation. In: Håkan Schunnesson and Daniel Johanson
(ed.), 12th International Symposium on Rock Fragmentation by Blasting, Luleå, Sweden, 11-13 June
2018. Luleå: Luleå University of Technology. pp. 139–148.
Van Oosterhout, D., 2016. Use of MWD Data for Detecting Discontinuities, Master’s Thesis. Delft: Delft
University of Technology, Netherland.
Vasuki, Y., Holden, E., Kovesi, P. & Micklethwaite, S., 2014. Semi-Automatic Mapping of Geological
Structures using UAV-Based Photogrammetric Data: An Image Analysis Approach. Computers &
Geosciences 69(1): 22–32.
Westboy, M.J. et al., 2012. ‘Structure-from-Motion’ photogrammetry: A low-cost, effective tool for geoscience applications. Geomorphology 179(1): 300–314.
Vezhapparambu, V.S., Eidsvik, J. & Ellefmo, S.L., 2018. Rock Classification Using Multivariate Analysis of Measurement While Drilling Data: Towards a Better Sampling Strategy. Minerals 8(384).
Wolf, P.R. & Dewitt, B.A., 2000. Elements of Photogrammetry with Applications in GIS. Third Edition
ed. Boston: McGraw Hill Higher Education. ISBN: 0072924543.
Beyglou, A., 2016. On the Operational Efficiency in Open Pit Mines, Licentiate Thesis. Luleå: Luleå
Tekniska Universitet, Sweden. ISBN: 978-91-7583-699-7 (electronic).
Buyer, A. & Schubert, W., 2017. Calculation the Spacing of Discontinuities from 3D Point Clouds.
Proceedia Engineering 191(1): 270–278.
Ferrero, A.M., Forlani, G., Roncella, R. & Voyat, H.I., 2009. Advanced Geostructural Survey Methods
Applied to Rock Mass Characterization. Rock Mechanics and Rock Engineering 42(1): 631–665.
Firpo, G., Salvini, R., Francioni, M. & Ranjith, P.G., 2011. Use of Digital Terrestrial Photogrammetry
in Rocky Slope Stability Analysis by Distinct Elements Numerical Methods. International Journal of
Rock Mechanics & Mining Sciences 48(1): 1045–1054.
Gaich, A., Pötsch, M. & Schubert, W., 2006. Acquisition and Assessment of Geometric Rock Mass
Features by True 3D Images. In: The 41st U.S. Symposium on Rock Mechanics (USRMS), 17–21
June, 2006. Golden, Colorado: American Rock Mechanics Association.
Ghosh, R., Gustafson, A. & Schunnesson, H., 2018. Development of a Geological Model for Chargeability Assessment of Borehole using Drill monitoring Technique. International Journal of Rock
Mechanics and Mining Sciences 109(1): 9–18.
Ghosh, R., Schunnesson, H. & Gustafson, A., 2017. Monitoring of Drill System Behavior for WaterPowered In-The-Hole (ITH) Drilling. Minerals 7(121).
Haneberg, W.C., 2008. Using Close Range Terrestrial Digital Photogrammetry for 3D Rock Slope modelling and Discontinuity Mapping in the United States. Bulletin of Engineering Geology & Environment 67(4): 457–469.
Khorzoughi, M.B., 2013. Use of Measurement While Drilling Techniques for Improved Rock Mass Characterization in Open-Pit Mines, Master’s Thesis. Vancouver: University of British Columbia, Canada. DOI: 10.14288/1.0073823.
Khorzoughi, M.B., Hall, R. & Apel, D., 2018. Rock Fracture Density Characterization using Measurement While Drilling (MWD) Technique. International Journal of Mining Science and Technology
28(1): 859–864.
Leighton, J.C., 1982. Development of a Correlation between Rotary Drill Performance and Controlled
Blasting Powder Factors, Master’s Thesis. Vancouver: University of British Columbia, Canada. DOI:
10.14288/1.0095103.
Piyush, R., Schunnesson, H., Lindqvist, P.-A. & Kumar, U., 2016. Measurement-While-Drilling Technique and its Scope in Design and Prediction of Rock Blasting. International Journal of Mining Science and Technology 26(4): 711–719.
Rodgers, M., McVay, M., Horhota, D. & Hernando, J., 2018. Assessment of Rock Strength from Measuring While Drilling Shafts in Florida Limestone. Canadian Geotechnical Journal 55(8): 1154–1167.
Schunnesson, H., 1996. RQD Prediction Based on Drill Performance. Tunneling and Underground Space
Technology 11(3): 345–351.
Segui, J.B. & Higgins, M., 2002. Blast Design Using Measurement While Drilling Parameters. Fragblast:
International Journal for Blasting and Fragmentation 6(3–4): 287–299.
Sturzenegger, M. & Stead, D., 2009. Close-Range Terrestrial Digital Photogrammetry and Terrestrial
Laser Scanning for Discontinuity Characterization on Rock Cuts. Engineering Geology 106(1):
163–182.
Van Eldert, J., Schunnesson, H., Johansson, D. & Saiang, D., 2018. Measurement While Drilling
(MWD) Technology for Blasting Damage Calculation. In: Håkan Schunnesson and Daniel Johanson
(ed.), 12th International Symposium on Rock Fragmentation by Blasting, Luleå, Sweden, 11-13 June
2018. Luleå: Luleå University of Technology. pp. 139–148.
Van Oosterhout, D., 2016. Use of MWD Data for Detecting Discontinuities, Master’s Thesis. Delft: Delft
University of Technology, Netherland.
Vasuki, Y., Holden, E., Kovesi, P. & Micklethwaite, S., 2014. Semi-Automatic Mapping of Geological
Structures using UAV-Based Photogrammetric Data: An Image Analysis Approach. Computers &
Geosciences 69(1): 22–32.
Westboy, M.J. et al., 2012. ‘Structure-from-Motion’ photogrammetry: A low-cost, effective tool for geoscience applications. Geomorphology 179(1): 300–314.
Vezhapparambu, V.S., Eidsvik, J. & Ellefmo, S.L., 2018. Rock Classification Using Multivariate Analysis of Measurement While Drilling Data: Towards a Better Sampling Strategy. Minerals 8(384).
Wolf, P.R. & Dewitt, B.A., 2000. Elements of Photogrammetry with Applications in GIS. Third Edition
ed. Boston: McGraw Hill Higher Education. ISBN: 0072924543.