E1C09 09/14/2010
15:4:56 Page 416
REFERENCES
1. American Society of Mechanical Engineers (ASME), PTC 19.2–1987: Pressure Measurement,
ASME International, New York, 1987.
2. Brombacher, W. G., D. P. Johnson, and J. L. Cross, Mercury Barometers and Manometers,
National Bureau Standards Monograph 8, 1960.
3. McLeod, H. G., Vacuum Gauge, Philosophical Magazine, 48, 110, 1874. Reprinted in History
of Vacuum Science and Technology, edited by T. E. Madey and W. C. Brown, American Vacuum
Society, New York, 1984, pp. 102–105.
4. M. Hetenyi, ed., Handbook of Experimental Stress Analysis, Wiley, New York, 1950.
5. Way, S., Bending of circular plates with large deflection, Transactions of the ASME 56, 1934.
6. Instrument Society of America (ISA), A Guide for the Dynamic Calibration of Pressure
Transducers, ISA-37.16.01-2002, Instrument Society of America, 2002.
7. Franklin, R. E., and J. M. Wallace, Absolute measurements of static-hole error using flush
transducers, Journal of Fluid Mechanics 42, 1970.
8. Rayle, R. E., Influence of orifice geometry on static pressure measurements, ASME Paper No.
59-A-234, 1959.
9. Munson, B., D. Young, T. Okishi, Fundamentals of Fluid Mechanics, 6th ed., Wiley, New York,
2009.
10. Migliavacca, F., et al., Multiscale modelling in an Biofluidynamics: Application to
reconstructive paediatric cardiac surgery, Journal of Biomechanics, 39, 6, 2006.
11. Delio, G., G. Schwent, and R. Cesaro, Transient behavior of lumped-constant systems
for sensing gas pressures, National Advisory Council on Aeronautics (NACA) TN-1988,
1949.
12. Doebelin, E. O., Measurement Systems: Application and Design, 5th ed., McGraw-Hill
Science/Engineering/Math, New York, 2003.
13. Hougen, J., O. Martin, and R. Walsh, Dynamics of pneumatic transmission lines, Control Engr.,
September 1963.
14. King, L. V., On the convection from small cylinders in a stream of fluid: Determination of the
convection constants of small platinum wires with application to hot-wire anemometry,
Proceedings of the Royal Society, London 90, 1914.
15. Hinze, J. O., Turbulence, McGraw-Hill, New York, 1959.
16. Collis, D. C., and M. J. Williams, Two-dimensional convection from heated wires at low
Reynolds numbers, Journal of Fluid Mechanics 6, 1959.
17. Rodi, W., A new method for analyzing hot-wire signals in a highly turbulent flow and its
evaluation in a round jet, DISA Information, Dantek Electronics, Denmark, 1975. See also,
Bruun, H. H., Interpretation of X-wire signals, DISA Information, Dantek Electronics,
Denmark, 1975.
18. Freymuth, P., A bibliography of thermal anemometry, TSI Quarterly 4, 1978.
19. Yeh, Y., and H. Cummins, Localized fluid flow measurement with a He-Ne laser spectrometer,
Applied Physics Letters 4, 1964.
20. Photon correlation and light beating spectroscopy, H. Z. Cummins and E. R. Pike, eds.,
Proceedings of the NATO ASI, Plenum, New York, 1973.
21. Durst, F., A. Melling, and J. H. Whitelaw, Principles and Practice of Laser Doppler
Anemometry, Academic Press, New York, 1976.
22. R. J. Goldstein, ed., Fluid Mechanics Measurements, 2nd ed., CRC Press, New York, 1996.
416 Chapter 9 Pressure and Velocity Measurements
15:4:56 Page 416
REFERENCES
1. American Society of Mechanical Engineers (ASME), PTC 19.2–1987: Pressure Measurement,
ASME International, New York, 1987.
2. Brombacher, W. G., D. P. Johnson, and J. L. Cross, Mercury Barometers and Manometers,
National Bureau Standards Monograph 8, 1960.
3. McLeod, H. G., Vacuum Gauge, Philosophical Magazine, 48, 110, 1874. Reprinted in History
of Vacuum Science and Technology, edited by T. E. Madey and W. C. Brown, American Vacuum
Society, New York, 1984, pp. 102–105.
4. M. Hetenyi, ed., Handbook of Experimental Stress Analysis, Wiley, New York, 1950.
5. Way, S., Bending of circular plates with large deflection, Transactions of the ASME 56, 1934.
6. Instrument Society of America (ISA), A Guide for the Dynamic Calibration of Pressure
Transducers, ISA-37.16.01-2002, Instrument Society of America, 2002.
7. Franklin, R. E., and J. M. Wallace, Absolute measurements of static-hole error using flush
transducers, Journal of Fluid Mechanics 42, 1970.
8. Rayle, R. E., Influence of orifice geometry on static pressure measurements, ASME Paper No.
59-A-234, 1959.
9. Munson, B., D. Young, T. Okishi, Fundamentals of Fluid Mechanics, 6th ed., Wiley, New York,
2009.
10. Migliavacca, F., et al., Multiscale modelling in an Biofluidynamics: Application to
reconstructive paediatric cardiac surgery, Journal of Biomechanics, 39, 6, 2006.
11. Delio, G., G. Schwent, and R. Cesaro, Transient behavior of lumped-constant systems
for sensing gas pressures, National Advisory Council on Aeronautics (NACA) TN-1988,
1949.
12. Doebelin, E. O., Measurement Systems: Application and Design, 5th ed., McGraw-Hill
Science/Engineering/Math, New York, 2003.
13. Hougen, J., O. Martin, and R. Walsh, Dynamics of pneumatic transmission lines, Control Engr.,
September 1963.
14. King, L. V., On the convection from small cylinders in a stream of fluid: Determination of the
convection constants of small platinum wires with application to hot-wire anemometry,
Proceedings of the Royal Society, London 90, 1914.
15. Hinze, J. O., Turbulence, McGraw-Hill, New York, 1959.
16. Collis, D. C., and M. J. Williams, Two-dimensional convection from heated wires at low
Reynolds numbers, Journal of Fluid Mechanics 6, 1959.
17. Rodi, W., A new method for analyzing hot-wire signals in a highly turbulent flow and its
evaluation in a round jet, DISA Information, Dantek Electronics, Denmark, 1975. See also,
Bruun, H. H., Interpretation of X-wire signals, DISA Information, Dantek Electronics,
Denmark, 1975.
18. Freymuth, P., A bibliography of thermal anemometry, TSI Quarterly 4, 1978.
19. Yeh, Y., and H. Cummins, Localized fluid flow measurement with a He-Ne laser spectrometer,
Applied Physics Letters 4, 1964.
20. Photon correlation and light beating spectroscopy, H. Z. Cummins and E. R. Pike, eds.,
Proceedings of the NATO ASI, Plenum, New York, 1973.
21. Durst, F., A. Melling, and J. H. Whitelaw, Principles and Practice of Laser Doppler
Anemometry, Academic Press, New York, 1976.
22. R. J. Goldstein, ed., Fluid Mechanics Measurements, 2nd ed., CRC Press, New York, 1996.
416 Chapter 9 Pressure and Velocity Measurements