346
A. Strobel et al.
14. Lu, X., Liu, C.-C., Zhu, L.-P., Qu, X.-H.: Influence of process parameters on the characteristics
of TiAl alloyed powders by fluidized bed jet milling. Powder Technol. 254, 235–240 (2014)
15. Palaniandy, S., Azizi Mohd Azizli, K., Hussin, H., Fuad Saiyid Hashim, S.: Mechanochemistry
of silica on jet milling. J. Mater. Process. Technol. 205, 119–127 (2008)
16. Schwarzwälder, S., Nied, R., Sickel, H.: Dry fine grinding with jet mills: potentials of energy
optimization. Chem. Eng. Technol. 37, 806–812 (2014)
17. Tasirin, S.M., Geldart, D.: Experimental investigation on fluidized bed jet grinding. Powder
Technol. 105, 337–341 (1999)
18. Wang, Y., Peng, F.: Parameter effects on dry fine pulverization of alumina particles in a fluidized
bed opposed jet mill. Powder Technol. 214, 269–277 (2011)
19. Berthiaux, H., Dodds, J.: Modelling fine grinding in a fluidized bed opposed jet mill. Powder
Technol. 106, 78–87 (1999)
20. Fukunaka, T., Golman, B., Shinohara, K.: Batch grinding kinetics of ethenzamide particles by
fluidized-bed jet-milling. Int. J. Pharm. 311, 89–96 (2006)
21. Xu, X., Li, X., Liu, F., Wei, W., Wang, X., Liu, K., Liu, Z.: Batch grinding kinetics of scrap
tire rubber particles in a fluidized-bed jet mill. Powder Technol. 305, 389–395 (2017)
22. Toneva, P., Wirth, K.-E., Peukert, W.: Grinding in an air classifier mill—part II: characterisation
of the two-phase flow. Powder Technol. 211, 28–37 (2011)
23. Galk, J., Peukert, W., Krahnen, J.: Industrial classification in a new impeller wheel classifier.
Powder Technol. 105, 186–189 (1999)
24. Guo, L., Liu, J., Liu, S., Wang, J.: Velocity measurements and flow field characteristic analyses
in a turbo air classifier. Powder Technol. 178, 10–16 (2007)
25. Liu, R., Zhu, F., Steinberger, Y.: Effectiveness of afforested shrub plantation on ground-active
arthropod communities and trophic structure in desertified regions. CATENA 125, 1–9 (2015)
26. Stender, M., Legenhausen, K., Weber, A.P.: Visualisierung der Partikelbewegung in einem
Abweiseradsichter. Chem. Ing. Tec. 87, 1392–1401 (2015)
27. Sun, Z., Sun, G., Liu, J., Yang, X.: CFD simulation and optimization of the flow field in
horizontal turbo air classifiers. Adv. Powder Technol. 28, 1474–1485 (2017)
28. Xing, W., Wang, Y., Zhang, Y., Yamane, Y., Saga, M., Lu, J., Zhang, H., Jin, Y.: Experimental
study on velocity field between two adjacent blades and gas–solid separation of a turbo air
classifier. Powder Technol. 286, 240–245 (2015)
29. Köninger, B., Hensler, T., Romeis, S., Peukert, W., Wirth, K.-E.: Dynamics of fine grinding in
a fluidized bed opposed jet mill. Powder Technol. 327, 346–357 (2018)
30. Richtberg, M., Richter, R., Wirth, K.-E.: Characterization of the flow patterns in a pressurized
circulating fluidized bed. Powder Technol. 155, 145–152 (2005)
31. Köninger, B., Spötter, C., Romeis, S., Weber, A.P., Wirth, K.-E.: Classifier performance during
dynamic fine grinding in fluidized bed opposed jet mills. Adv. Powder Technol. 30, 1678–1686
(2019)
32. Spötter, C., Legenhausen, K., Weber, A.P.: Separation characteristics of a deflector wheel
classifier in stationary conditions and at high loadings: new insights by flow visualization.
KONA 35, 172–185 (2018)
33. Strobel, A., Köninger, B., Romeis, S., Schott, F., Wirth, K.-E., Peukert, W.: Assessing stress
conditions and impact velocities in fluidized bed opposed jet mills. Particuology, accepted
34. Köninger, B., Hensler, T., Schug, S., Arlt, Wirth, K.-E.: Horizontal secondary gas injection
in fluidized beds: solid concentration and velocity in multiphase jets. Powder Technol. 316,
49–58 (2017)
35. Godet-Morand, L., Chamayou, A., Dodds, J.: Talc grinding in an opposed air jet mill: start-up,
product quality and production rate optimization. Powder Technol. 128, 306–313 (2002)
36. Fukunaka, T., Golman, B., Shinohara, K.: Continuous grinding kinetics of ethenzamide
particles by fluidized-bed jet-milling. Drug Dev. Ind. Pharm. 32, 347–355 (2006)
37. Sigmund Lindner GmbH, Data Sheet. www.sigmund-lindner.com. Accessed 26 June 2017
(2017)
38. Meier, M., John, E., Wieckhusen, D., Wirth, W., Peukert, W.: Influence of mechanical properties on impact fracture: prediction of the milling behaviour of pharmaceutical powders by
nanoindentation. Powder Technol. 188, 301–313 (2009)
A. Strobel et al.
14. Lu, X., Liu, C.-C., Zhu, L.-P., Qu, X.-H.: Influence of process parameters on the characteristics
of TiAl alloyed powders by fluidized bed jet milling. Powder Technol. 254, 235–240 (2014)
15. Palaniandy, S., Azizi Mohd Azizli, K., Hussin, H., Fuad Saiyid Hashim, S.: Mechanochemistry
of silica on jet milling. J. Mater. Process. Technol. 205, 119–127 (2008)
16. Schwarzwälder, S., Nied, R., Sickel, H.: Dry fine grinding with jet mills: potentials of energy
optimization. Chem. Eng. Technol. 37, 806–812 (2014)
17. Tasirin, S.M., Geldart, D.: Experimental investigation on fluidized bed jet grinding. Powder
Technol. 105, 337–341 (1999)
18. Wang, Y., Peng, F.: Parameter effects on dry fine pulverization of alumina particles in a fluidized
bed opposed jet mill. Powder Technol. 214, 269–277 (2011)
19. Berthiaux, H., Dodds, J.: Modelling fine grinding in a fluidized bed opposed jet mill. Powder
Technol. 106, 78–87 (1999)
20. Fukunaka, T., Golman, B., Shinohara, K.: Batch grinding kinetics of ethenzamide particles by
fluidized-bed jet-milling. Int. J. Pharm. 311, 89–96 (2006)
21. Xu, X., Li, X., Liu, F., Wei, W., Wang, X., Liu, K., Liu, Z.: Batch grinding kinetics of scrap
tire rubber particles in a fluidized-bed jet mill. Powder Technol. 305, 389–395 (2017)
22. Toneva, P., Wirth, K.-E., Peukert, W.: Grinding in an air classifier mill—part II: characterisation
of the two-phase flow. Powder Technol. 211, 28–37 (2011)
23. Galk, J., Peukert, W., Krahnen, J.: Industrial classification in a new impeller wheel classifier.
Powder Technol. 105, 186–189 (1999)
24. Guo, L., Liu, J., Liu, S., Wang, J.: Velocity measurements and flow field characteristic analyses
in a turbo air classifier. Powder Technol. 178, 10–16 (2007)
25. Liu, R., Zhu, F., Steinberger, Y.: Effectiveness of afforested shrub plantation on ground-active
arthropod communities and trophic structure in desertified regions. CATENA 125, 1–9 (2015)
26. Stender, M., Legenhausen, K., Weber, A.P.: Visualisierung der Partikelbewegung in einem
Abweiseradsichter. Chem. Ing. Tec. 87, 1392–1401 (2015)
27. Sun, Z., Sun, G., Liu, J., Yang, X.: CFD simulation and optimization of the flow field in
horizontal turbo air classifiers. Adv. Powder Technol. 28, 1474–1485 (2017)
28. Xing, W., Wang, Y., Zhang, Y., Yamane, Y., Saga, M., Lu, J., Zhang, H., Jin, Y.: Experimental
study on velocity field between two adjacent blades and gas–solid separation of a turbo air
classifier. Powder Technol. 286, 240–245 (2015)
29. Köninger, B., Hensler, T., Romeis, S., Peukert, W., Wirth, K.-E.: Dynamics of fine grinding in
a fluidized bed opposed jet mill. Powder Technol. 327, 346–357 (2018)
30. Richtberg, M., Richter, R., Wirth, K.-E.: Characterization of the flow patterns in a pressurized
circulating fluidized bed. Powder Technol. 155, 145–152 (2005)
31. Köninger, B., Spötter, C., Romeis, S., Weber, A.P., Wirth, K.-E.: Classifier performance during
dynamic fine grinding in fluidized bed opposed jet mills. Adv. Powder Technol. 30, 1678–1686
(2019)
32. Spötter, C., Legenhausen, K., Weber, A.P.: Separation characteristics of a deflector wheel
classifier in stationary conditions and at high loadings: new insights by flow visualization.
KONA 35, 172–185 (2018)
33. Strobel, A., Köninger, B., Romeis, S., Schott, F., Wirth, K.-E., Peukert, W.: Assessing stress
conditions and impact velocities in fluidized bed opposed jet mills. Particuology, accepted
34. Köninger, B., Hensler, T., Schug, S., Arlt, Wirth, K.-E.: Horizontal secondary gas injection
in fluidized beds: solid concentration and velocity in multiphase jets. Powder Technol. 316,
49–58 (2017)
35. Godet-Morand, L., Chamayou, A., Dodds, J.: Talc grinding in an opposed air jet mill: start-up,
product quality and production rate optimization. Powder Technol. 128, 306–313 (2002)
36. Fukunaka, T., Golman, B., Shinohara, K.: Continuous grinding kinetics of ethenzamide
particles by fluidized-bed jet-milling. Drug Dev. Ind. Pharm. 32, 347–355 (2006)
37. Sigmund Lindner GmbH, Data Sheet. www.sigmund-lindner.com. Accessed 26 June 2017
(2017)
38. Meier, M., John, E., Wieckhusen, D., Wirth, W., Peukert, W.: Influence of mechanical properties on impact fracture: prediction of the milling behaviour of pharmaceutical powders by
nanoindentation. Powder Technol. 188, 301–313 (2009)