5 Development of a Dynamic-Physical Process Model for Sieving
195
49. Lian, G., Seville, J.: The capillary bridge between two spheres: new closed-form equations in
a two century old problem. Adv. Coll. Interface. Sci. 227, 53–62 (2016)
50. Gladkyy, A., Schwarze, R.: Comparison of different capillary bridge models for application
in the discrete element method. Granular Matter 16(6), 911–920 (2014)
51. Mikami, T., Kamiya, H., Horio, M.: Numerical simulation of cohesive powder behavior in a
fluidized bed. Chem. Eng. Sci. 53(10), 1927–1940 (1998)
52. Washino, K., Chan, E.L., Miyazaki, K., Tsuji, T., Tanaka, T.: Time step criteria in DEM
simulation of wet particles in viscosity dominant systems. Powder Technol. 302, 100–107
(2016)
53. Schmelzle, S., Nirschl, H.: DEM simulations: mixing of dry and wet granular material with
different contact angles. Granular Matter 20, 19 (2018)
54. Radl, S., Kalvoda, E., Glasser, B.J., Khinast, J.G.: Mixing characteristics of wet granular
matter in a bladed mixer. Powder Technol. 200(3), 171–189 (2010)
55. Scholtès, L., Chareyre, B., Nicot, F., Darve, F.: Discrete modelling of capillary mechanisms
in multi-phase granular media. Comput. Model. Eng. Sci. 52(3), 297–318 (2009)
56. Melnikov, K., Mani, R., Wittel, F.K., Thielmann, M., Herrmann, H.J.: Grain scale modeling
of arbitrary fluid saturation in random packings. Phys. Rev. E 92(2), 022206 (2015)
57. Wang, J., Gallo, E., François, B., Gabrieli, F., Lambert, P.: Capillary force and rupture of
funicular liquid bridges between three spherical bodies. Powder Technol. 305, 89–98 (2017)
58. Butt, H.-J., Kappl, M.: Surface and Interfacial Forces. Wiley-VCH Verlag, Weinheim (2010)
59. Coetzee, C.J.: Review: calibration of the discrete element method. Powder Technol. 310,
104–142 (2017)
60. Marigo, M., Stitt, E.H.: Discrete element method (DEM) for industrial applications: comments
on calibration and validation for the modelling of cylindrical pellets. KONA Powder Part. J.
32(32), 236–252 (2015)
61. Simons, T.A.H., Weiler, R., Strege, S., Bensmann, S., Schilling, M., Kwade, A.: A ring shear
tester as calibration experiment for DEM simulations in agitated mixers—a sensitivity study.
Procedia Eng. 102, 741–748 (2015)
62. Grima, A.P., Wypych, P.W.: Investigation into calibration of discrete element model parameters for scale-up and validation of particle-structure interactions under impact conditions.
Powder Technol. 212(1), 198–209 (2011)
63. Barrios, G.K.P., de Carvalho, R.M., Kwade, A., Tavares, L.M.: Contact parameter estimation
for DEM simulation of iron ore pellet handling. Powder Technol. 248, 84–93 (2013)
64. Markauskas, D., Kaˇ cianauskas, R., Džiugys, A., Navakas, R.: Investigation of adequacy of
multi-sphere approximation of elliptical particles for DEM simulations. Granular Matter
12(1), 107–123 (2010)
65. Pasha, M., Hare, C., Ghadiri, M., Gunadi, A., Piccione, P.M.: Effect of particle shape on flow
in discrete element method simulation of a rotary batch seed coater. Powder Technol. 296,
29–36 (2016)
66. Williams, K.C., Chen, W., Weeger, S., Donohue, T.J.: Particle shape characterisation and its
application to discrete element modelling. Particuology 12(1), 80–89 (2014)
67. Mollon, G., Zhao, J.: Generating realistic 3D sand particles using Fourier descriptors. Granular
Matter 15(1), 95–108 (2013)
68. Just, S., Toschkoff, G., Funke, A., Djuric, D., Scharrer, G., Khinast, J., Knop, K., Kleinebudde,
P.: Experimental analysis of tablet properties for discrete element modeling of an active coating
process. AAPS PharmSciTech 14(1), 402–411 (2013)
69. Chung, Y.-C., Ooi, J.Y.: A study of influence of gravity on bulk behaviour of particulate solid.
Particuology 6(6), 467–474 (2008)
70. González-Montellano, C., Fuentes, J.M., Ayuga-Téllez, E., Ayuga, F.: Determination of the
mechanical properties of maize grains and olives required for use in DEM simulations. J.
Food Eng. 111(4), 553–562 (2012)
71. Senetakis, K., Coop, M.R., Todisco, M.C.: The inter-particle coefficient of friction at the
contacts of Leighton Buzzard sand quartz minerals. Soils Found. 53(5), 746–755 (2013)
195
49. Lian, G., Seville, J.: The capillary bridge between two spheres: new closed-form equations in
a two century old problem. Adv. Coll. Interface. Sci. 227, 53–62 (2016)
50. Gladkyy, A., Schwarze, R.: Comparison of different capillary bridge models for application
in the discrete element method. Granular Matter 16(6), 911–920 (2014)
51. Mikami, T., Kamiya, H., Horio, M.: Numerical simulation of cohesive powder behavior in a
fluidized bed. Chem. Eng. Sci. 53(10), 1927–1940 (1998)
52. Washino, K., Chan, E.L., Miyazaki, K., Tsuji, T., Tanaka, T.: Time step criteria in DEM
simulation of wet particles in viscosity dominant systems. Powder Technol. 302, 100–107
(2016)
53. Schmelzle, S., Nirschl, H.: DEM simulations: mixing of dry and wet granular material with
different contact angles. Granular Matter 20, 19 (2018)
54. Radl, S., Kalvoda, E., Glasser, B.J., Khinast, J.G.: Mixing characteristics of wet granular
matter in a bladed mixer. Powder Technol. 200(3), 171–189 (2010)
55. Scholtès, L., Chareyre, B., Nicot, F., Darve, F.: Discrete modelling of capillary mechanisms
in multi-phase granular media. Comput. Model. Eng. Sci. 52(3), 297–318 (2009)
56. Melnikov, K., Mani, R., Wittel, F.K., Thielmann, M., Herrmann, H.J.: Grain scale modeling
of arbitrary fluid saturation in random packings. Phys. Rev. E 92(2), 022206 (2015)
57. Wang, J., Gallo, E., François, B., Gabrieli, F., Lambert, P.: Capillary force and rupture of
funicular liquid bridges between three spherical bodies. Powder Technol. 305, 89–98 (2017)
58. Butt, H.-J., Kappl, M.: Surface and Interfacial Forces. Wiley-VCH Verlag, Weinheim (2010)
59. Coetzee, C.J.: Review: calibration of the discrete element method. Powder Technol. 310,
104–142 (2017)
60. Marigo, M., Stitt, E.H.: Discrete element method (DEM) for industrial applications: comments
on calibration and validation for the modelling of cylindrical pellets. KONA Powder Part. J.
32(32), 236–252 (2015)
61. Simons, T.A.H., Weiler, R., Strege, S., Bensmann, S., Schilling, M., Kwade, A.: A ring shear
tester as calibration experiment for DEM simulations in agitated mixers—a sensitivity study.
Procedia Eng. 102, 741–748 (2015)
62. Grima, A.P., Wypych, P.W.: Investigation into calibration of discrete element model parameters for scale-up and validation of particle-structure interactions under impact conditions.
Powder Technol. 212(1), 198–209 (2011)
63. Barrios, G.K.P., de Carvalho, R.M., Kwade, A., Tavares, L.M.: Contact parameter estimation
for DEM simulation of iron ore pellet handling. Powder Technol. 248, 84–93 (2013)
64. Markauskas, D., Kaˇ cianauskas, R., Džiugys, A., Navakas, R.: Investigation of adequacy of
multi-sphere approximation of elliptical particles for DEM simulations. Granular Matter
12(1), 107–123 (2010)
65. Pasha, M., Hare, C., Ghadiri, M., Gunadi, A., Piccione, P.M.: Effect of particle shape on flow
in discrete element method simulation of a rotary batch seed coater. Powder Technol. 296,
29–36 (2016)
66. Williams, K.C., Chen, W., Weeger, S., Donohue, T.J.: Particle shape characterisation and its
application to discrete element modelling. Particuology 12(1), 80–89 (2014)
67. Mollon, G., Zhao, J.: Generating realistic 3D sand particles using Fourier descriptors. Granular
Matter 15(1), 95–108 (2013)
68. Just, S., Toschkoff, G., Funke, A., Djuric, D., Scharrer, G., Khinast, J., Knop, K., Kleinebudde,
P.: Experimental analysis of tablet properties for discrete element modeling of an active coating
process. AAPS PharmSciTech 14(1), 402–411 (2013)
69. Chung, Y.-C., Ooi, J.Y.: A study of influence of gravity on bulk behaviour of particulate solid.
Particuology 6(6), 467–474 (2008)
70. González-Montellano, C., Fuentes, J.M., Ayuga-Téllez, E., Ayuga, F.: Determination of the
mechanical properties of maize grains and olives required for use in DEM simulations. J.
Food Eng. 111(4), 553–562 (2012)
71. Senetakis, K., Coop, M.R., Todisco, M.C.: The inter-particle coefficient of friction at the
contacts of Leighton Buzzard sand quartz minerals. Soils Found. 53(5), 746–755 (2013)