1 Friction Stir Welding
35
References
1. Aissani M, Gachi S, Boubenider F, Benkedda Y (2010) Design and optimization of friction
stir welding tool. Mater Manuf Process 25(11):1199–1205. https://doi.org/10.1080/104269109
03536733
2. Beamish K, Ezeilo A, Smith S, Lewis P, Cheetham P, Blignault C, Welding I (2006) National
Research Council of C development of a low cost FSW monitoring system. In: International
symposium; 6th, friction stir welding. Cambridge, 2006. TWI Ltd; pp 17–17
3. Besharati Givi MK, Asadi P (2014) 1—General introduction. In: Givi MKB, Asadi P (eds)
Advances in friction-stir welding and processing. Woodhead Publishing, pp 1–19. https://doi.
org/10.1533/9780857094551.1
4. Bisadi H, Rasaee S, Farahmand M (2014) Effects of pin shape on the tool plunge stage in
friction stir welding. Trans Indian Inst Met 67(6):989–995. https://doi.org/10.1007/s12666014-0421-8
5. Brewer LN, Bennett MS, Baker BW, Payzant EA, Sochalski-Kolbus LM (2015) Characterization of residual stress as a function of friction stir welding parameters in oxide dispersion
strengthened (ODS) steel MA956. Mater Sci Eng A 647:313–321. https://doi.org/10.1016/j.
msea.2015.09.020
6. Chen J, Fujii H, Sun Y, Morisada Y, Kondoh K, Hashimoto K (2012) Effect of grain size on the
microstructure and mechanical properties of friction stir welded non-combustive magnesium
alloys. Mater Sci Eng A 549:176–184. https://doi.org/10.1016/j.msea.2012.04.030
7. Chen TP, Lin WB (2010) Optimal FSW process parameters for interface and welded zone toughness of dissimilar aluminium–steel joint. Sci Technol Weld Joining 15(4):279–285. https://doi.
org/10.1179/136217109X12518083193711
8. Colligan KJ (2010) The friction stir welding process: an overview. In: Lohwasser D, Chen Z
(eds) Friction stir welding. Woodhead Publishing, pp 15–41. https://doi.org/10.1533/978184
5697716.1.15
9. Cui HB, Xie GM, Luo ZA, Ma J, Wang GD, Misra RDK (2016) The microstructural evolution
and impact toughness of nugget zone in friction stir welded X100 pipeline steel. J Alloy Compd
681:426–433. https://doi.org/10.1016/j.jallcom.2016.03.299
10. Darras BM (2012) A model to predict the resulting grain size of friction-stir-processed AZ31
magnesium alloy. J Mater Eng Perform 21(7):1243–1248. https://doi.org/10.1007/s11665-0110039-5
11. Edwards P, Ramulu M (2010) Identification of process parameters for friction stir welding
Ti–6Al–4V. J Eng Mater Technol 132(3). https://doi.org/10.1115/1.4001302
12. Emami S, Saeid T, Khosroshahi RA (2018) Microstructural evolution of friction stir welded
SAF 2205 duplex stainless steel. J Alloy Compd 739:678–689. https://doi.org/10.1016/j.jal
lcom.2017.12.310
13. Esparza JA, Davis WC, Murr LE (2003) Microstructure-property studies in friction-stir welded,
Thixomolded magnesium alloy AM60. J Mater Sci 38(5):941–952. https://doi.org/10.1023/A:
1022321107957
14. Fahimpour V, Sadrnezhaad SK, Karimzadeh F (2012) Corrosion behavior of aluminum 6061
alloy joined by friction stir welding and gas tungsten arc welding methods. Mater Des 39:329–
333. https://doi.org/10.1016/j.matdes.2012.02.043
15. Fuller CB, Mahoney MW, Calabrese M, Micona L (2010) Evolution of microstructure and
mechanical properties in naturally aged 7050 and 7075 Al friction stir welds. Mater Sci Eng
A 527(9):2233–2240. https://doi.org/10.1016/j.msea.2009.11.057
16. Gan W, Okamoto K, Hirano S, Chung K, Kim C, Wagoner RH (2008) Properties of friction-stir
welded aluminum alloys 6111 and 5083. J Eng Mater Technol 130(3). https://doi.org/10.1115/
1.2931143
17. Genevois C, Deschamps A, Denquin A, Doisneau-cottignies B (2005) Quantitative investigation of precipitation and mechanical behaviour for AA2024 friction stir welds. Acta Mater
53(8):2447–2458. https://doi.org/10.1016/j.actamat.2005.02.007
35
References
1. Aissani M, Gachi S, Boubenider F, Benkedda Y (2010) Design and optimization of friction
stir welding tool. Mater Manuf Process 25(11):1199–1205. https://doi.org/10.1080/104269109
03536733
2. Beamish K, Ezeilo A, Smith S, Lewis P, Cheetham P, Blignault C, Welding I (2006) National
Research Council of C development of a low cost FSW monitoring system. In: International
symposium; 6th, friction stir welding. Cambridge, 2006. TWI Ltd; pp 17–17
3. Besharati Givi MK, Asadi P (2014) 1—General introduction. In: Givi MKB, Asadi P (eds)
Advances in friction-stir welding and processing. Woodhead Publishing, pp 1–19. https://doi.
org/10.1533/9780857094551.1
4. Bisadi H, Rasaee S, Farahmand M (2014) Effects of pin shape on the tool plunge stage in
friction stir welding. Trans Indian Inst Met 67(6):989–995. https://doi.org/10.1007/s12666014-0421-8
5. Brewer LN, Bennett MS, Baker BW, Payzant EA, Sochalski-Kolbus LM (2015) Characterization of residual stress as a function of friction stir welding parameters in oxide dispersion
strengthened (ODS) steel MA956. Mater Sci Eng A 647:313–321. https://doi.org/10.1016/j.
msea.2015.09.020
6. Chen J, Fujii H, Sun Y, Morisada Y, Kondoh K, Hashimoto K (2012) Effect of grain size on the
microstructure and mechanical properties of friction stir welded non-combustive magnesium
alloys. Mater Sci Eng A 549:176–184. https://doi.org/10.1016/j.msea.2012.04.030
7. Chen TP, Lin WB (2010) Optimal FSW process parameters for interface and welded zone toughness of dissimilar aluminium–steel joint. Sci Technol Weld Joining 15(4):279–285. https://doi.
org/10.1179/136217109X12518083193711
8. Colligan KJ (2010) The friction stir welding process: an overview. In: Lohwasser D, Chen Z
(eds) Friction stir welding. Woodhead Publishing, pp 15–41. https://doi.org/10.1533/978184
5697716.1.15
9. Cui HB, Xie GM, Luo ZA, Ma J, Wang GD, Misra RDK (2016) The microstructural evolution
and impact toughness of nugget zone in friction stir welded X100 pipeline steel. J Alloy Compd
681:426–433. https://doi.org/10.1016/j.jallcom.2016.03.299
10. Darras BM (2012) A model to predict the resulting grain size of friction-stir-processed AZ31
magnesium alloy. J Mater Eng Perform 21(7):1243–1248. https://doi.org/10.1007/s11665-0110039-5
11. Edwards P, Ramulu M (2010) Identification of process parameters for friction stir welding
Ti–6Al–4V. J Eng Mater Technol 132(3). https://doi.org/10.1115/1.4001302
12. Emami S, Saeid T, Khosroshahi RA (2018) Microstructural evolution of friction stir welded
SAF 2205 duplex stainless steel. J Alloy Compd 739:678–689. https://doi.org/10.1016/j.jal
lcom.2017.12.310
13. Esparza JA, Davis WC, Murr LE (2003) Microstructure-property studies in friction-stir welded,
Thixomolded magnesium alloy AM60. J Mater Sci 38(5):941–952. https://doi.org/10.1023/A:
1022321107957
14. Fahimpour V, Sadrnezhaad SK, Karimzadeh F (2012) Corrosion behavior of aluminum 6061
alloy joined by friction stir welding and gas tungsten arc welding methods. Mater Des 39:329–
333. https://doi.org/10.1016/j.matdes.2012.02.043
15. Fuller CB, Mahoney MW, Calabrese M, Micona L (2010) Evolution of microstructure and
mechanical properties in naturally aged 7050 and 7075 Al friction stir welds. Mater Sci Eng
A 527(9):2233–2240. https://doi.org/10.1016/j.msea.2009.11.057
16. Gan W, Okamoto K, Hirano S, Chung K, Kim C, Wagoner RH (2008) Properties of friction-stir
welded aluminum alloys 6111 and 5083. J Eng Mater Technol 130(3). https://doi.org/10.1115/
1.2931143
17. Genevois C, Deschamps A, Denquin A, Doisneau-cottignies B (2005) Quantitative investigation of precipitation and mechanical behaviour for AA2024 friction stir welds. Acta Mater
53(8):2447–2458. https://doi.org/10.1016/j.actamat.2005.02.007