7 Tubular Structures: Welding Difficulty and Potential …
251
19. Gunaraj V, Murugan N (1999) Application of response surface methodology for predicting
weld bead quality in submerged arc welding of pipes. J Mater Process Technol 88:266–275.
https://doi.org/10.1016/S0924-0136(98)00405-1
20. Chen X, Lu H, Chen G, Wang X (2015) A comparison between fracture toughness at different
locations of longitudinal submerged arc welded and spiral submerged arc welded joints of
API X80 pipeline steels. Eng Fract Mech 148:110–121. https://doi.org/10.1016/j.engfracmech.
2015.09.003
21. Wen SW, Hilton P, Farrugia DCJ (2001) Finite element modelling of a submerged arc welding
process. J Mater Process Technol 119:203–209. https://doi.org/10.1016/S0924-0136(01)009
45-1
22. Lin M, Gao K, Wang C, Volinsky AA (2012) Failure analysis of the oil transport spiral welded
pipe. Eng Fail Anal 25:169–174. https://doi.org/10.1016/j.engfailanal.2012.05.008
23. Gong K, Wu M, Xie F, Liu G (2020) Effect of dissolved oxygen concentration on stress corrosion
cracking behavior of pre-corroded X100 steel base metal and the welded joint in wet—dry cycle
conditions. J Nat Gas Sci Eng 77:103264. https://doi.org/10.1016/j.jngse.2020.103264
24. Simion P, Dia V, Istrate B, Munteanu C (2014) Controlling and monitoring of welding parameters for micro-alloyed steel pipes produced by high frequency electric welding. Adv Mater
Res 1036:464–469. https://doi.org/10.4028/www.scientific.net/AMR.1036.464
25. Chung PC, Ham Y, Kim S et al (2012) Effects of post-weld heat treatment cycles on microstructure and mechanical properties of electric resistance welded pipe welds. Mater Des 34:685–690.
https://doi.org/10.1016/j.matdes.2011.05.027
26. Park G, Kim B, Kang Y et al (2016) Characterization of bond line discontinuities in a high-Mn
TWIP steel pipe welded by HF-ERW. Mater Charact 118:14–21. https://doi.org/10.1016/j.mat
char.2016.05.005
27. Kato C, Otogtmo Y, Kado S, Hisamatsly Y (1978) Grooving corrosion in electric resistance welded steel pipe in sea water. Corros Sci 18:61–74. https://doi.org/10.1016/S0010938X(78)80076-6
28. Bi Z, Wang R, Jing X (2012) Grooving corrosion of oil coiled tubes manufactured by electrical
resistance welding. Corros Sci 57:67–73. https://doi.org/10.1016/j.corsci.2011.12.033
29. Miranda R, Costa A, Quintino L et al (2009) Characterization of fiber laser welds in X100
pipeline steel. Mater Des 30:2701–2707. https://doi.org/10.1016/j.matdes.2008.09.042
30. Donnell DO, Kettermann C (2018) Performance implications of high energy density welding
of corrosion resistant alloy heat exchanger tubing. Press Vessel Pip Conf 49255:13–20. https://
doi.org/10.1115/PVP2010-25165
31. Feng JC, Rathod DW, Roy MJ et al (2017) An evaluation of multipass narrow gap laser welding
as a candidate process for the manufacture of nuclear pressure vessels. Int J Press Vessel Pip
157:43–50. https://doi.org/10.1016/j.ijpvp.2017.08.004
32. Hui-chi C, Guijun B, Chen-nan S (2014) High-energy beam welding processes in manufacturing. In: Handbook of manufacturing engineering and technology. Springer, London, pp
617–639
33. Guo J (2015) Solid state welding processes in manufacturing. In: Handbook of manufacturing
engineering and technology. Springer, London, pp 569–592
34. Zamani E, Hossien G (2012) Explosive welding of stainless steel—carbon steel coaxial pipes.
J Mater Sci 47:685–695. https://doi.org/10.1007/s10853-011-5841-9
35. Xuegang W, Fengjie YAN, Qian YAN, Xingeng LI (2007) Amorphous diffusion bonding of
steel pipe and its impact toughness. Front Mater Sci China 1:225–227. https://doi.org/10.1007/
s11706-007-0040-y
36. Chludzinski M, Eugenio R, Ramminger D et al (2019) Full-scale friction welding system for
pipeline steels. Integr Med Res 8:1773–1780. https://doi.org/10.1016/j.jmrt.2018.12.007
37. Fratini L, Piacentini M (2006) Friction stir welding of 3D industrial parts: joint strength analysis.
Eng Syst Des Anal 42517:763–770. https://doi.org/10.1115/EDSA2006-95382
38. Iqbal MP, Jain R, Pal SK (2019) Numerical and experimental study on friction stir welding
of aluminum alloy pipe. J Mater Process Technol 274:116258. https://doi.org/10.1016/j.jmatpr
otec.2019.116258
251
19. Gunaraj V, Murugan N (1999) Application of response surface methodology for predicting
weld bead quality in submerged arc welding of pipes. J Mater Process Technol 88:266–275.
https://doi.org/10.1016/S0924-0136(98)00405-1
20. Chen X, Lu H, Chen G, Wang X (2015) A comparison between fracture toughness at different
locations of longitudinal submerged arc welded and spiral submerged arc welded joints of
API X80 pipeline steels. Eng Fract Mech 148:110–121. https://doi.org/10.1016/j.engfracmech.
2015.09.003
21. Wen SW, Hilton P, Farrugia DCJ (2001) Finite element modelling of a submerged arc welding
process. J Mater Process Technol 119:203–209. https://doi.org/10.1016/S0924-0136(01)009
45-1
22. Lin M, Gao K, Wang C, Volinsky AA (2012) Failure analysis of the oil transport spiral welded
pipe. Eng Fail Anal 25:169–174. https://doi.org/10.1016/j.engfailanal.2012.05.008
23. Gong K, Wu M, Xie F, Liu G (2020) Effect of dissolved oxygen concentration on stress corrosion
cracking behavior of pre-corroded X100 steel base metal and the welded joint in wet—dry cycle
conditions. J Nat Gas Sci Eng 77:103264. https://doi.org/10.1016/j.jngse.2020.103264
24. Simion P, Dia V, Istrate B, Munteanu C (2014) Controlling and monitoring of welding parameters for micro-alloyed steel pipes produced by high frequency electric welding. Adv Mater
Res 1036:464–469. https://doi.org/10.4028/www.scientific.net/AMR.1036.464
25. Chung PC, Ham Y, Kim S et al (2012) Effects of post-weld heat treatment cycles on microstructure and mechanical properties of electric resistance welded pipe welds. Mater Des 34:685–690.
https://doi.org/10.1016/j.matdes.2011.05.027
26. Park G, Kim B, Kang Y et al (2016) Characterization of bond line discontinuities in a high-Mn
TWIP steel pipe welded by HF-ERW. Mater Charact 118:14–21. https://doi.org/10.1016/j.mat
char.2016.05.005
27. Kato C, Otogtmo Y, Kado S, Hisamatsly Y (1978) Grooving corrosion in electric resistance welded steel pipe in sea water. Corros Sci 18:61–74. https://doi.org/10.1016/S0010938X(78)80076-6
28. Bi Z, Wang R, Jing X (2012) Grooving corrosion of oil coiled tubes manufactured by electrical
resistance welding. Corros Sci 57:67–73. https://doi.org/10.1016/j.corsci.2011.12.033
29. Miranda R, Costa A, Quintino L et al (2009) Characterization of fiber laser welds in X100
pipeline steel. Mater Des 30:2701–2707. https://doi.org/10.1016/j.matdes.2008.09.042
30. Donnell DO, Kettermann C (2018) Performance implications of high energy density welding
of corrosion resistant alloy heat exchanger tubing. Press Vessel Pip Conf 49255:13–20. https://
doi.org/10.1115/PVP2010-25165
31. Feng JC, Rathod DW, Roy MJ et al (2017) An evaluation of multipass narrow gap laser welding
as a candidate process for the manufacture of nuclear pressure vessels. Int J Press Vessel Pip
157:43–50. https://doi.org/10.1016/j.ijpvp.2017.08.004
32. Hui-chi C, Guijun B, Chen-nan S (2014) High-energy beam welding processes in manufacturing. In: Handbook of manufacturing engineering and technology. Springer, London, pp
617–639
33. Guo J (2015) Solid state welding processes in manufacturing. In: Handbook of manufacturing
engineering and technology. Springer, London, pp 569–592
34. Zamani E, Hossien G (2012) Explosive welding of stainless steel—carbon steel coaxial pipes.
J Mater Sci 47:685–695. https://doi.org/10.1007/s10853-011-5841-9
35. Xuegang W, Fengjie YAN, Qian YAN, Xingeng LI (2007) Amorphous diffusion bonding of
steel pipe and its impact toughness. Front Mater Sci China 1:225–227. https://doi.org/10.1007/
s11706-007-0040-y
36. Chludzinski M, Eugenio R, Ramminger D et al (2019) Full-scale friction welding system for
pipeline steels. Integr Med Res 8:1773–1780. https://doi.org/10.1016/j.jmrt.2018.12.007
37. Fratini L, Piacentini M (2006) Friction stir welding of 3D industrial parts: joint strength analysis.
Eng Syst Des Anal 42517:763–770. https://doi.org/10.1115/EDSA2006-95382
38. Iqbal MP, Jain R, Pal SK (2019) Numerical and experimental study on friction stir welding
of aluminum alloy pipe. J Mater Process Technol 274:116258. https://doi.org/10.1016/j.jmatpr
otec.2019.116258