106
Water for Energy and Fuel Production
135. Olafadehan, O., Susu, A., and Jaiyeola, A., “Mechanistic kinetic models for n-heptane
reforming on platinum/alumina catalysts,” Petroleum Science and Technology, 26,
1459–1480 (2008).
136. Salaun, M., Capela, S., De Costa, S., Gagnepain, L., and De Costa, P., “Enhancement
of 3-way CNG catalyst performance at high temperature due to the presence of water in
the feed: On the role of steam reforming of methane and on the influence of ageing,” Top
Catalysis, 52, 1972–1976 (2009).
137. Futamura, S. and Kabashima, H., “Steam reforming of aliphatic hydrocarbons with
nonthermal plasma,” IEEE Transactions of Industrial Applications, 40 (6), 1476–1481
(2004).
138. Mota, N., Alvarez-Galvan, A.C., Villoria, J.A., Rosa, F., Fierro, J., and Navarro, R.,
“Reforming of diesel fuel for hydrogen production over catalysts derived from
LaCo 1-x M x O 3 (M = Ru, Fe),” Top Catalysis, 52, 1995–2000 (2009).
139. Ambroise, E., Courson, C., Keinnemann, A., Roger, A., Pajot, O., Samson, E., and
Blanchard, G., “On-board hydrogen production through catalytic exhaust-gas reforming of isooctane: Efficiency of mixed oxide catalysts Ce 2 Zr 1.5 Me 0.5 O 8 (Me = Co, Rh or
Co–noble metal),” Top Catalysis, 52, 2101–2107 (2009).
140. Krauppila, R., “Concurrent production of syngas and steel from coal, biomass and iron
ore,” U.P. Steel, DE-PS02-07ER07-36, Topic 57a (November, 2007).
141. Kaila, R., Gutierrez, A., Korhonen, S., and Krause, A., “Autothermal reforming of
n-dodecane, toluene and their mixture on mono- and bimetallic noble metal zirconia
catalysts,” Catalysis Letters, 15 (1/2), 70–78 (2007).
142. Kiryanov, D., Smolikov, M., Pashkov, V., Proskura, A., Zatolokina, E., Udras, I., and
Belyi, A., “Modern state of catalytic reforming of petrol fractions. Experience of manufacture and industrial exploitation of reforming catalysts of the PR series,” Russian
Journal of General Chemistry, 77 (12), 2255–2264 (2007).
143. Encinar, J., Gonzalez, J., Martinez, G., Sanchez, N., and Sanguino, J., “Hydrogen production by means pyrolysis and steam gasification of glycerol,” International Conference
on Renewable Energies and Power Quality, April 13–15, Las Palmas de Gran Canaria,
Spain (2010).
144. Maciel, C. and Ishikura, S., “Steam reforming of renewable feedstock’s for the production of hydrogen,” Universidad de Zaragoza, Zaragoza, Spain (2007).
145. Zhang, B., Tang, x., Li, Y., xu, Y., and Shen, W., “Hydrogen production from steam
reforming of ethanol and glycerol over ceria supported metal catalysts,” International
Journal of Hydrogen Energy, 32 (13), 2367–2373 (2007).
146. Sadanandam, G., Sreelatha, N., Sharma, P.M., Reddy, S., Srinivas, B., Venkateswarlu, K.,
Krishnudu, T., Subrahmanyam, M., and Kumar, V., “Steam reforming of glycerol for
hydrogen production over Ni/Al 2 O 3 catalyst,” ISRN Chemical Engineering, 2012, 10
(2012), http://dx.doi.org/10.5402/2012/591587.
147. Hakim, L., Yaakob, Z., Ismail, M., Daud, W., and Sari, R., “Hydrogen production
by steam reforming of glycerol over Ni/Ce/Cu hydroxyapatite-supported catalysts,”
Chemical Papers, 67 (7), 703–712 (2013).
148. Simonetti, D., Kunkes, E., and Dumesic, J., “Gas phase conversion of glycerol to synthesis gas over carbon supported platinum and platinum-rhenium catalysts,” Journal of
Catalysis, 247 (2), 298–306 (2007).
149. Reddy, R., Patel, S., Nair, S., and Suvikram, Y., “Preparation of hydrogen from glycerol via steam reforming process,” International Conference on Current Trends in
Technology, NUICONE, December 8–10, Nirma University, Ahmedabad, India
(2011).
150. Wang, H., Wang, x., Li, M., Li, S., Wang, S., and Ma, x., “Thermodynamic analysis
of hydrogen production from glycerol autothermal reforming,” International Journal of
Hydrogen Energy, 34, 5683–5690 (2009).