80
3 Experimental Techniques
PCM. Research methodology and experimental design are also discussed in this
chapter. The working of wind tunnel and data collection techniques are discussed,
which will help the readers to completely understand the experimental setup.
References
1. R. Swart, The History of Bicycle Helmets (1999). Available: http://www.helmets.org/webdocs/
history.htm. Accessed March 15, 2010
2. J. Creazzo, Interaction Between a Non-embedded Longitudinal Vortex and Turbulent Boundary
Layer Under the Influence of Stream Wise Pressure Gradient, PhD Dissertation (RMIT
University, Melbourne, Victoria, Australia, 1999)
3. Ellis, Development of Fundamental Theory and Techniques for the Design and Optimization
of Bicycle Helmet Ventilation. PhD Thesis. RMIT University, Melbourne, Victoria, Australia
(2003)
4. F.P. Incropera, D.P. De Witt, Fundamentals of Heat and Mass Transfer, 3rd edn. (Wiley, New
York, 1990)
5. E. Gmelin, S.M. Sarge, Calibration of differential scanning calorimeters. Pure Appl. Chem. 67,
1789–1800 (1995)
6. P.O. Fanger, Thermal Comfort: Analysis and Applications in Environmental Engineering
(Mcgraw Hill, New York, 1972)
7. ASHRAE Handbook: American Society of Heating, Refrigeration and Air-Conditioning
Engineers Incorporation, Atlanta, pp. 8.1–8.29 (1993)
8. S.B. Thornton, S.S. Nair, Paramedic studies of human thermal mechanisms and measurements.
IEEE Trans. Biomed. Eng 47(4) (April, 2000)
9. K. Sinnappoo, R. Nayak, L. Thompson, R. Padhye, Application of sustainable phase change
materials in motorcycle helmet for heat-stress reduction. J. Text.E Inst, 1–9. https://doi.org/10.
1080/00405000.2020.1715606
3 Experimental Techniques
PCM. Research methodology and experimental design are also discussed in this
chapter. The working of wind tunnel and data collection techniques are discussed,
which will help the readers to completely understand the experimental setup.
References
1. R. Swart, The History of Bicycle Helmets (1999). Available: http://www.helmets.org/webdocs/
history.htm. Accessed March 15, 2010
2. J. Creazzo, Interaction Between a Non-embedded Longitudinal Vortex and Turbulent Boundary
Layer Under the Influence of Stream Wise Pressure Gradient, PhD Dissertation (RMIT
University, Melbourne, Victoria, Australia, 1999)
3. Ellis, Development of Fundamental Theory and Techniques for the Design and Optimization
of Bicycle Helmet Ventilation. PhD Thesis. RMIT University, Melbourne, Victoria, Australia
(2003)
4. F.P. Incropera, D.P. De Witt, Fundamentals of Heat and Mass Transfer, 3rd edn. (Wiley, New
York, 1990)
5. E. Gmelin, S.M. Sarge, Calibration of differential scanning calorimeters. Pure Appl. Chem. 67,
1789–1800 (1995)
6. P.O. Fanger, Thermal Comfort: Analysis and Applications in Environmental Engineering
(Mcgraw Hill, New York, 1972)
7. ASHRAE Handbook: American Society of Heating, Refrigeration and Air-Conditioning
Engineers Incorporation, Atlanta, pp. 8.1–8.29 (1993)
8. S.B. Thornton, S.S. Nair, Paramedic studies of human thermal mechanisms and measurements.
IEEE Trans. Biomed. Eng 47(4) (April, 2000)
9. K. Sinnappoo, R. Nayak, L. Thompson, R. Padhye, Application of sustainable phase change
materials in motorcycle helmet for heat-stress reduction. J. Text.E Inst, 1–9. https://doi.org/10.
1080/00405000.2020.1715606