70
T. B. Asafa et al.
Hussein SI, Abd-Elnaiem AM, Asafa TB, Jaafar HI (2018) Effect of incorporation of conductive
fillers on mechanical properties and thermal conductivity of epoxy resin composite. Appl Phys
A Mater Sci Process 124(7). https://doi.org/10.1007/s00339-018-1890-0
Iniewski K (2009) Medical imaging: principles, detectors, and electronics. In: Medical imaging:
principles, detectors, and electronics. https://doi.org/10.1002/9780470451816
Inkson BJ (2016) Scanning electron microscopy and transmission electron microscopy for materials
characterization. In: Materials characterization using nondestructive evaluation (NDE) methods.
Elsevier Ltd. https://doi.org/10.1016/B978-0-08-100040-3.00002-X
Ishida N, Craig VSJ (2018) Direct measurement of interaction forces between surfaces in liquids
using atomic force microscopy. Kona Powder Part J, July, 1–14. https://doi.org/10.14356/kona.
2019013
Ishida N, Kusaka Y, Fukasawa T, Shinto H (2016) Atomic force microscopy for measuring interaction forces in biological materials. In: Ohshima H (ed) Encyclopedia of biocolloid and biointerface
science, vol 1, pp 59–67
Laserna J (2001) An introduction to raman spectroscopy: introduction and basic principles. http://www.Spectroscopynow.Com/Spy/Basehtml/SpyH/1,1181,6-1-12-0-0-News_detail0-321,00.Html
Jia J, Yang W, Xue Q (1986) Scanning tunneling microscopy. In: Jia J, Yang W, Xue Q (eds) Optical
microscopy, scanning probe microscopy, ion microscopy and nanofabrication, pp 55–112
Kalantar-zadeh K, Fry B (2008) Characterization techniques for nanomaterials. In: Kalantar-zadeh
K, Fry B (eds) Nanotechnology-enabled sensors. https://doi.org/10.1007/978-0-387-68023-1_5
Kaszuba M, McKnight D, Connah MT, McNeil-Watson FK, Nobbmann U (2008) Measuring sub
nanometre sizes using dynamic light scattering. J Nanoparticle Res. https://doi.org/10.1007/s11
051-007-9317-4
Keyso RJ, Garratt-Reed AJ, Goodhew PJ, Lorimer GW (1998) Introduction to scanning transmission
electron microscopy. CRC Press
Kohl H, Reimer L (2008) Transmission electron microscopy: physics of image formation. Springer,
Berlin Heidelberg
Largiller G, Dong L, Bouvard D, Carry CP, Gabriel A (2011) Constitutive modeling of the behavior
of cermet compacts during reaction sintering. Powder Technol 208:496. https://doi.org/10.1016/
j.powtec.2010.08.049
Lateef A, Ojo SA, Akinwale AS, Azeez L, Gueguim-Kana EB, Beukes LS (2015) Biogenic synthesis
of silver nanoparticles using cell-free extract of Bacillus safensis LAU 13: antimicrobial, free
radical scavenging and larvicidal activities. Biol 70(10):1295–1306. https://doi.org/10.1515/bio
log-2015-0164
Lateef A, Azeez MA, Asafa TB, Yekeen TA, Akinboro A, Oladipo IC, Azeez L, Ajibade SE, Ojo
SA, Gueguim-kana EB, Beukes LS (2016) Biogenic synthesis of silver nanoparticles using a pod
extract of Cola nitida : antibacterial and antioxidant activities and application as a paint additive.
J Taibah Univ Sci 10(4):551–562. https://doi.org/10.1016/j.jtusci.2015.10.010
Lee H-L, Flynn NT (2006) X-ray photoelectron spectroscopy BT. Appl Solid State Spectrosc,
Handb. https://doi.org/10.1007/0-387-37590-2_11
Lin JF, Li SS, Linares LC, Teng KW (1981) Theoretical analysis of Hall factor and Hall mobility in
p-type silicon. Solid State Electron 24:827–833. https://doi.org/10.1016/0038-1101(81)90098-8
Liu PS, Chen GF (2014) Porous materials: processing and applications. Butterworth-Heinemann
Lupke F, Dolezal J, Cherepanov V, Ostadal I, Tautz FS, Voigtlander B (2018) Surface structures of
tellurium on Si(111)–(7 × 7) studied by low-energy electron diffraction and scanning tunneling
microscopy. Surf Sci 681:130–133. https://doi.org/10.1016/j.susc.2018.11.016
Maca K, Pouchly V, Boccaccini AR (2008) Sintering densification curve-a practical approach for
its construction from dilatometric shrinkage data. Sci Sinter 40:117. https://doi.org/10.2298/SOS
0802117M
Marinello F, Storia AL, Mauriello G, Passeri D (2019) Atomic force microscopy techniques to
investigate activated food packaging materials. Trends Food Sci Technol 87:84–93. https://doi.
org/10.1016/j.tifs.2018.05.028
T. B. Asafa et al.
Hussein SI, Abd-Elnaiem AM, Asafa TB, Jaafar HI (2018) Effect of incorporation of conductive
fillers on mechanical properties and thermal conductivity of epoxy resin composite. Appl Phys
A Mater Sci Process 124(7). https://doi.org/10.1007/s00339-018-1890-0
Iniewski K (2009) Medical imaging: principles, detectors, and electronics. In: Medical imaging:
principles, detectors, and electronics. https://doi.org/10.1002/9780470451816
Inkson BJ (2016) Scanning electron microscopy and transmission electron microscopy for materials
characterization. In: Materials characterization using nondestructive evaluation (NDE) methods.
Elsevier Ltd. https://doi.org/10.1016/B978-0-08-100040-3.00002-X
Ishida N, Craig VSJ (2018) Direct measurement of interaction forces between surfaces in liquids
using atomic force microscopy. Kona Powder Part J, July, 1–14. https://doi.org/10.14356/kona.
2019013
Ishida N, Kusaka Y, Fukasawa T, Shinto H (2016) Atomic force microscopy for measuring interaction forces in biological materials. In: Ohshima H (ed) Encyclopedia of biocolloid and biointerface
science, vol 1, pp 59–67
Laserna J (2001) An introduction to raman spectroscopy: introduction and basic principles. http://www.Spectroscopynow.Com/Spy/Basehtml/SpyH/1,1181,6-1-12-0-0-News_detail0-321,00.Html
Jia J, Yang W, Xue Q (1986) Scanning tunneling microscopy. In: Jia J, Yang W, Xue Q (eds) Optical
microscopy, scanning probe microscopy, ion microscopy and nanofabrication, pp 55–112
Kalantar-zadeh K, Fry B (2008) Characterization techniques for nanomaterials. In: Kalantar-zadeh
K, Fry B (eds) Nanotechnology-enabled sensors. https://doi.org/10.1007/978-0-387-68023-1_5
Kaszuba M, McKnight D, Connah MT, McNeil-Watson FK, Nobbmann U (2008) Measuring sub
nanometre sizes using dynamic light scattering. J Nanoparticle Res. https://doi.org/10.1007/s11
051-007-9317-4
Keyso RJ, Garratt-Reed AJ, Goodhew PJ, Lorimer GW (1998) Introduction to scanning transmission
electron microscopy. CRC Press
Kohl H, Reimer L (2008) Transmission electron microscopy: physics of image formation. Springer,
Berlin Heidelberg
Largiller G, Dong L, Bouvard D, Carry CP, Gabriel A (2011) Constitutive modeling of the behavior
of cermet compacts during reaction sintering. Powder Technol 208:496. https://doi.org/10.1016/
j.powtec.2010.08.049
Lateef A, Ojo SA, Akinwale AS, Azeez L, Gueguim-Kana EB, Beukes LS (2015) Biogenic synthesis
of silver nanoparticles using cell-free extract of Bacillus safensis LAU 13: antimicrobial, free
radical scavenging and larvicidal activities. Biol 70(10):1295–1306. https://doi.org/10.1515/bio
log-2015-0164
Lateef A, Azeez MA, Asafa TB, Yekeen TA, Akinboro A, Oladipo IC, Azeez L, Ajibade SE, Ojo
SA, Gueguim-kana EB, Beukes LS (2016) Biogenic synthesis of silver nanoparticles using a pod
extract of Cola nitida : antibacterial and antioxidant activities and application as a paint additive.
J Taibah Univ Sci 10(4):551–562. https://doi.org/10.1016/j.jtusci.2015.10.010
Lee H-L, Flynn NT (2006) X-ray photoelectron spectroscopy BT. Appl Solid State Spectrosc,
Handb. https://doi.org/10.1007/0-387-37590-2_11
Lin JF, Li SS, Linares LC, Teng KW (1981) Theoretical analysis of Hall factor and Hall mobility in
p-type silicon. Solid State Electron 24:827–833. https://doi.org/10.1016/0038-1101(81)90098-8
Liu PS, Chen GF (2014) Porous materials: processing and applications. Butterworth-Heinemann
Lupke F, Dolezal J, Cherepanov V, Ostadal I, Tautz FS, Voigtlander B (2018) Surface structures of
tellurium on Si(111)–(7 × 7) studied by low-energy electron diffraction and scanning tunneling
microscopy. Surf Sci 681:130–133. https://doi.org/10.1016/j.susc.2018.11.016
Maca K, Pouchly V, Boccaccini AR (2008) Sintering densification curve-a practical approach for
its construction from dilatometric shrinkage data. Sci Sinter 40:117. https://doi.org/10.2298/SOS
0802117M
Marinello F, Storia AL, Mauriello G, Passeri D (2019) Atomic force microscopy techniques to
investigate activated food packaging materials. Trends Food Sci Technol 87:84–93. https://doi.
org/10.1016/j.tifs.2018.05.028