Characterization Techniques in Nanotechnology …
69
Einstein A (1905) On a heuristic point of view about the creation and conversion of light, translated
from German by Haar. T Ann Phys. https://doi.org/10.1002/andp.19053220607
Fang J, Wang C, Li Y, Zhao Z, Mei L (2016) Comparison of bacterial adhesion to dental materials
of polyethylene terephthalate (PET) and polymethyl methacrylate (PMMA) using atomic force
microscopy and scanning electron microscopy. Scanning 38(6):665–670. https://doi.org/10.1002/
sca.21314
Fernandes IJ, Sánchez FA, Jurado JR, Kieling AG, Rocha TLAC (2017) Physical, chemical and
electric characterization of thermally treated rice husk ash and its potential application as ceramic
raw material. Adv Powder Technol 28:1228–1236. https://doi.org/10.1016/j.apt.2017.02.009
Fujii Y, Okajima T (2019) Calibrating the Young’s modulus of soft materials with surface tilt angle
measured by atomic force microscopy. AIP Adv 9:015028. https://doi.org/10.1063/1.5046372
Gao L, Li Y, Ren J, Wang S, Wang R, Fu G, Hu Y (2017) Passivation of defect states in anatase
TiO 2 hollow spheres with Mg doping: realizing efficient photocatalytic overall water splitting.
Appl Catal B Environ 202:127–133. https://doi.org/10.1016/j.apcatb.2016.09.018
Gardiner DJ (1989) Introduction to raman scattering. In: Practical raman spectroscopy. https://doi.
org/10.1007/978-3-642-74040-4_1
Giahi M, Pathania D, Agarwal S, Ali GAM, Chonge KF, Gupta VK (2019) Preparation of Mgdoped TiO 2 nanoparticles for photocatalytic degradation of some organic pollutants. Stud Univ
Babes-Bolyai Chem 64(1):7–18. https://doi.org/10.24193/subbchem.2019.1.01
Gilliland GD (1997) Photoluminescence spectroscopy of crystalline semiconductors. Sci Eng R
Rep, Mater. https://doi.org/10.1016/s0927-796x(97)80003-4
Gobind GN, Parshad J (2015) Techniques of measuring wear for bulk materials and advanced
surface coatings. IOSR J Mech Civ Eng (IOSR-JMCE) 12(2):101–106. https://doi.org/10.9790/
1684-1226101106
Goldstein JI, Newbury DE, Echlin P, Joy DC, Fiori C, Lifshin E, Goldstein JI, Newbury DE,
Echlin P, Joy DC, Fiori C, Lifshin E (1981) Materials specimen preparation for SEM and X-ray
microanalysis. In: Scanning electron microscopy and X-ray microanalysis. https://doi.org/10.
1007/978-1-4613-3273-2_9
Goldstein JI, Newbury DE, Echlin P, Joy DC, Romig AD, Lyman CE, Fiori C, Lifshin E (1992)
Sample preparation for biological, organic, polymeric, and hydrated materials. In: Scanning
electron microscopy and x-ray microanalysis, Springer, Boston, MA, pp 571–670
González N, Del Àngels Custal M, Rodríguez D, Riba JR, Armelin E (2017) Influence of ZnO and
TiO2 particle sizes in the mechanical and dielectric properties of vulcanized rubber. Mater Res
20(4):1082–1091. https://doi.org/10.1590/1980-5373-MR-2017-0178
Goodhew PJ, Humphreys J, Beanland R (2001). Electron microscopy and analysis, 3rd edn. CRC
Press
Greczynski G, Hultman L (2020) X-ray photoelectron spectroscopy: towards reliable binding energy
referencing. Prog Mater Sci 107 (July 2019):100591. https://doi.org/10.1016/j.pmatsci.2019.
100591
Gualco A, Svoboda HG, Surian ES (2016) Study of abrasive wear resistance of Fe-based
nanostructured hardfacing. Wear 360–361:14–20. https://doi.org/10.1016/j.wear.2016.04.011
Harris DC (2010) Quantitative chemical analysis, 8th edition. W. H. Freeman and Company. https://
doi.org/10.1021/jf103070m
Hendrych A, Kubínek R, Zhukov AV (2007) The magnetic force microscopy and its capability for
nano-magnetic studies—the short compendium. Mod Res Educ Top Microsc 805–811
Hermodson M (1996) Current protocols in protein science. In: Proteins: structure, function and
genetics. https://doi.org/10.1002/prot.340240303
Huang Y (2017) Electrical and thermal properties of activated carbon fibers. In: Activated carbon
fiber and textiles, vol 7. Elsevier Ltd. https://doi.org/10.1016/B978-0-08-100660-3.00007-9
Huang Q, Wu H, Cai P, Fein JB, Chen W (2015) Atomic force microscopy measurements of
bacterial adhesion and biofilm formation onto clay-sized particles. Sci. Rep. 5:1–12. https://doi.
org/10.1038/srep16857
69
Einstein A (1905) On a heuristic point of view about the creation and conversion of light, translated
from German by Haar. T Ann Phys. https://doi.org/10.1002/andp.19053220607
Fang J, Wang C, Li Y, Zhao Z, Mei L (2016) Comparison of bacterial adhesion to dental materials
of polyethylene terephthalate (PET) and polymethyl methacrylate (PMMA) using atomic force
microscopy and scanning electron microscopy. Scanning 38(6):665–670. https://doi.org/10.1002/
sca.21314
Fernandes IJ, Sánchez FA, Jurado JR, Kieling AG, Rocha TLAC (2017) Physical, chemical and
electric characterization of thermally treated rice husk ash and its potential application as ceramic
raw material. Adv Powder Technol 28:1228–1236. https://doi.org/10.1016/j.apt.2017.02.009
Fujii Y, Okajima T (2019) Calibrating the Young’s modulus of soft materials with surface tilt angle
measured by atomic force microscopy. AIP Adv 9:015028. https://doi.org/10.1063/1.5046372
Gao L, Li Y, Ren J, Wang S, Wang R, Fu G, Hu Y (2017) Passivation of defect states in anatase
TiO 2 hollow spheres with Mg doping: realizing efficient photocatalytic overall water splitting.
Appl Catal B Environ 202:127–133. https://doi.org/10.1016/j.apcatb.2016.09.018
Gardiner DJ (1989) Introduction to raman scattering. In: Practical raman spectroscopy. https://doi.
org/10.1007/978-3-642-74040-4_1
Giahi M, Pathania D, Agarwal S, Ali GAM, Chonge KF, Gupta VK (2019) Preparation of Mgdoped TiO 2 nanoparticles for photocatalytic degradation of some organic pollutants. Stud Univ
Babes-Bolyai Chem 64(1):7–18. https://doi.org/10.24193/subbchem.2019.1.01
Gilliland GD (1997) Photoluminescence spectroscopy of crystalline semiconductors. Sci Eng R
Rep, Mater. https://doi.org/10.1016/s0927-796x(97)80003-4
Gobind GN, Parshad J (2015) Techniques of measuring wear for bulk materials and advanced
surface coatings. IOSR J Mech Civ Eng (IOSR-JMCE) 12(2):101–106. https://doi.org/10.9790/
1684-1226101106
Goldstein JI, Newbury DE, Echlin P, Joy DC, Fiori C, Lifshin E, Goldstein JI, Newbury DE,
Echlin P, Joy DC, Fiori C, Lifshin E (1981) Materials specimen preparation for SEM and X-ray
microanalysis. In: Scanning electron microscopy and X-ray microanalysis. https://doi.org/10.
1007/978-1-4613-3273-2_9
Goldstein JI, Newbury DE, Echlin P, Joy DC, Romig AD, Lyman CE, Fiori C, Lifshin E (1992)
Sample preparation for biological, organic, polymeric, and hydrated materials. In: Scanning
electron microscopy and x-ray microanalysis, Springer, Boston, MA, pp 571–670
González N, Del Àngels Custal M, Rodríguez D, Riba JR, Armelin E (2017) Influence of ZnO and
TiO2 particle sizes in the mechanical and dielectric properties of vulcanized rubber. Mater Res
20(4):1082–1091. https://doi.org/10.1590/1980-5373-MR-2017-0178
Goodhew PJ, Humphreys J, Beanland R (2001). Electron microscopy and analysis, 3rd edn. CRC
Press
Greczynski G, Hultman L (2020) X-ray photoelectron spectroscopy: towards reliable binding energy
referencing. Prog Mater Sci 107 (July 2019):100591. https://doi.org/10.1016/j.pmatsci.2019.
100591
Gualco A, Svoboda HG, Surian ES (2016) Study of abrasive wear resistance of Fe-based
nanostructured hardfacing. Wear 360–361:14–20. https://doi.org/10.1016/j.wear.2016.04.011
Harris DC (2010) Quantitative chemical analysis, 8th edition. W. H. Freeman and Company. https://
doi.org/10.1021/jf103070m
Hendrych A, Kubínek R, Zhukov AV (2007) The magnetic force microscopy and its capability for
nano-magnetic studies—the short compendium. Mod Res Educ Top Microsc 805–811
Hermodson M (1996) Current protocols in protein science. In: Proteins: structure, function and
genetics. https://doi.org/10.1002/prot.340240303
Huang Y (2017) Electrical and thermal properties of activated carbon fibers. In: Activated carbon
fiber and textiles, vol 7. Elsevier Ltd. https://doi.org/10.1016/B978-0-08-100660-3.00007-9
Huang Q, Wu H, Cai P, Fein JB, Chen W (2015) Atomic force microscopy measurements of
bacterial adhesion and biofilm formation onto clay-sized particles. Sci. Rep. 5:1–12. https://doi.
org/10.1038/srep16857