197
9. K. Kerrouche, A. Mezouar, L. Boumedien. “A simple and efficient maximized power control
of DFIG variable speed wind turbine”, 3rd International Conference.
10. D Julius Mwaniki, Hui Lin, Zhiyong Dai. “A Condensed Introduction to the Doubly Fed
Induction Generator Wind Energy Conversion Systems”, Journal of Engineering, 2017.
11. Hossain, Md. Faruque. “Design and construction of ultra-relativistic collision PV panel and
its application into building sector to mitigate total energy demand”, Journal of Building
Engineering, 2017.
12. Kheira Belgacem, Abelkader Mezouar, Najib Essounbouli. “Design and Analysis of Adaptive
Sliding Mode with Exponential Reaching Law Control for Double-Fed Induction Generator
Based Wind Turbine”, International Journal of Power Electronics and Drive Systems (IJPEDS),
2018.
13. Hossain, Md. Faruque. “Advanced Building Design”, Elsevier BV, 2019.
14. Hossain, Md. Faruque. “Theoretical mechanism to breakdown of photonic structure to design
a micro PV panel”, Energy Reports 2019.
15. H. Amimeur, D. Aouzellag, R. Abdessemed, K. Ghedamsi. “Sliding mode control of a dualstator induction generator for wind energy conversion systems”, International Journal of
Electrical Power & Energy Systems, 2012.
16. Phan, Dinh-Chung, and Shigeru Yamamoto. “Rotor speed control of doubly fed induction generator wind turbines using adaptive maximum power point tracking”, Energy, 2016.
17. Hossain, Md. Faruque. “Invisible transportation infrastructure technology to mitigate energy
and environment”, Energy, Sustainability and Society, 2017.
18. Mario Di Nardo, Mosè Gallo, Teresa Murino, Liberatina Carmela Santillo. “System Dynamics
Simulation for Fire and Explosion Risk Analysis in Home Environment”, International Review
on Modelling and Simulations (IREMOS), 2017.
19. Mohammed Ouassaid, Kamal Elyaalaoui, Mohammed Cherkaoui. “Reactive power capability of squirrel cage asynchronous generator connected to the grid”, 2015 3rd International
Renewable and Sustainable Energy Conference (IRSEC), 2015.
20. Farhad Ilahi Bakhsh, Dheeraj Kumar Khatod. “A new synchronous generator based wind
energy conversion system feeding an isolated load through variable frequency transformer”,
Renewable Energy.
21. Huang Ligang, Wang Xiangdong, Yan Kang. “Optimal speed tracking for double fed wind
generator via switching control”, The 27th Chinese Control and Decision Conference (2015
CCDC), 2015.
22. Vipin Chandra Upadhyay, K. S. Sandhu. “Reactive Power Management of Wind Farm
Using STATCOM”, 2018 International Conference on Emerging Trends and Innovations In
Engineering And Technological Research (ICETIETR), 2018.
23. Mezouar, A.. “Adaptive sliding-mode-observer for sensorless induction motor drive using twotimescale approach”, Simulation Modelling Practice and Theory, 2008.
24. Nabil Taib, Brahim Metidji, Toufik Rekioua. “Performance and efficiency control enhancement of wind power generation system based on DFIG using three-level sparse matrix converter”, International Journal of Electrical Power & Energy Systems, 2013.
25. “Modeling, Identification and Control Methods in Renewable Energy Systems”, Springer
Science and Business Media LLC, 2019.
26. Riouch, Tariq, and Rachid El-Bachtiri. “Advanced Control Strategy of Doubly Fed Induction
Generator Based Wind-Turbine during Symmetrical Grid Fault”, International Review of
Electrical Engineering (IREE), 2014.
27. Hossain, Md. Faruque, Nowhin Fara. “Integration of wind into running vehicles to meet its
total energy demand”, Energy, Ecology and Environment, 2016.
28. Hossain, Md. Faruque. “Photon application in the design of sustainable buildings to console
global energy and environment”, Applied Thermal Engineering, 2018.
29. Jogendra Singh, Mohand Ouhrouche. “Chapter 15 MPPT Control Methods in Wind Energy
Conversion Systems”, InTech, 2011.
References
9. K. Kerrouche, A. Mezouar, L. Boumedien. “A simple and efficient maximized power control
of DFIG variable speed wind turbine”, 3rd International Conference.
10. D Julius Mwaniki, Hui Lin, Zhiyong Dai. “A Condensed Introduction to the Doubly Fed
Induction Generator Wind Energy Conversion Systems”, Journal of Engineering, 2017.
11. Hossain, Md. Faruque. “Design and construction of ultra-relativistic collision PV panel and
its application into building sector to mitigate total energy demand”, Journal of Building
Engineering, 2017.
12. Kheira Belgacem, Abelkader Mezouar, Najib Essounbouli. “Design and Analysis of Adaptive
Sliding Mode with Exponential Reaching Law Control for Double-Fed Induction Generator
Based Wind Turbine”, International Journal of Power Electronics and Drive Systems (IJPEDS),
2018.
13. Hossain, Md. Faruque. “Advanced Building Design”, Elsevier BV, 2019.
14. Hossain, Md. Faruque. “Theoretical mechanism to breakdown of photonic structure to design
a micro PV panel”, Energy Reports 2019.
15. H. Amimeur, D. Aouzellag, R. Abdessemed, K. Ghedamsi. “Sliding mode control of a dualstator induction generator for wind energy conversion systems”, International Journal of
Electrical Power & Energy Systems, 2012.
16. Phan, Dinh-Chung, and Shigeru Yamamoto. “Rotor speed control of doubly fed induction generator wind turbines using adaptive maximum power point tracking”, Energy, 2016.
17. Hossain, Md. Faruque. “Invisible transportation infrastructure technology to mitigate energy
and environment”, Energy, Sustainability and Society, 2017.
18. Mario Di Nardo, Mosè Gallo, Teresa Murino, Liberatina Carmela Santillo. “System Dynamics
Simulation for Fire and Explosion Risk Analysis in Home Environment”, International Review
on Modelling and Simulations (IREMOS), 2017.
19. Mohammed Ouassaid, Kamal Elyaalaoui, Mohammed Cherkaoui. “Reactive power capability of squirrel cage asynchronous generator connected to the grid”, 2015 3rd International
Renewable and Sustainable Energy Conference (IRSEC), 2015.
20. Farhad Ilahi Bakhsh, Dheeraj Kumar Khatod. “A new synchronous generator based wind
energy conversion system feeding an isolated load through variable frequency transformer”,
Renewable Energy.
21. Huang Ligang, Wang Xiangdong, Yan Kang. “Optimal speed tracking for double fed wind
generator via switching control”, The 27th Chinese Control and Decision Conference (2015
CCDC), 2015.
22. Vipin Chandra Upadhyay, K. S. Sandhu. “Reactive Power Management of Wind Farm
Using STATCOM”, 2018 International Conference on Emerging Trends and Innovations In
Engineering And Technological Research (ICETIETR), 2018.
23. Mezouar, A.. “Adaptive sliding-mode-observer for sensorless induction motor drive using twotimescale approach”, Simulation Modelling Practice and Theory, 2008.
24. Nabil Taib, Brahim Metidji, Toufik Rekioua. “Performance and efficiency control enhancement of wind power generation system based on DFIG using three-level sparse matrix converter”, International Journal of Electrical Power & Energy Systems, 2013.
25. “Modeling, Identification and Control Methods in Renewable Energy Systems”, Springer
Science and Business Media LLC, 2019.
26. Riouch, Tariq, and Rachid El-Bachtiri. “Advanced Control Strategy of Doubly Fed Induction
Generator Based Wind-Turbine during Symmetrical Grid Fault”, International Review of
Electrical Engineering (IREE), 2014.
27. Hossain, Md. Faruque, Nowhin Fara. “Integration of wind into running vehicles to meet its
total energy demand”, Energy, Ecology and Environment, 2016.
28. Hossain, Md. Faruque. “Photon application in the design of sustainable buildings to console
global energy and environment”, Applied Thermal Engineering, 2018.
29. Jogendra Singh, Mohand Ouhrouche. “Chapter 15 MPPT Control Methods in Wind Energy
Conversion Systems”, InTech, 2011.
References