Pull-Out Tests and Numerical Simulations …
61
10. Serrano E (2001) Glued-in rods for timber structures—a 3D model and finite element parameter
studies. Int J Adhesion Adhesives 21:115–127
11. Szczecina M, Winnicki A (2016) Selected aspects of computer modeling of reinforced concrete
structures. Archives of Civil Engineering, vol. LXII(1)
12. Nuralinah D (2019) The pull-out test on knit bamboo reinforcement embedded into concrete
beam. MATEC Web Conf 258:1–7
13. Hariyadi MS, Sonoda Y (2017) Experimental analysis of anchor bolt in concrete under the
pull-out loading. Procedia Eng 171:26–933
14. Bažant ZP, ¸
Sener S (1988) Size effect in pullout tests. ACI Mater J 347–351. Technical Paper.
Title No. 85-M38
15. Epackachi S, Esmaili O, Mirghadeli SR, Behbahani AAT (2015) Behavior of adhesive bonded
anchors under tension and shear loads. J Constr Steel Res 114:269–280
16. Hüer T, Eligehausen R (2007) Splitting failure mode of bonded anchors. In: Fracture mechanics
of concrete structures—design, assessment and retrofitting of RC structures, pp 753–760
17. Kijania M (2015) The methods for computation of the bond stress between concrete and steel
reinforcement. Przeglad Budowlany 38–42 (in Polish)
18. Ligocki I (2002) HYSDOZOK—an automated system for applying loads in structural tests.
Konstrukcje Stalowe (3) (in Polish)
19. Hyrczak E, Kolarzowski M (2003) The HYSDOZOK hydraulic system is used to apply structure
loads. Hydraulika i Pneumatyka 4:17–18 (in Polish)
20. Szlendak JK, Jablonska-Krysiewicz A, Tomaszewicz D (2018) Assessment of the load capacity
of the anchorage system connecting the textured layer with the structural wall of large slab
buildings in the lights of experimental research and FEM analysis. In: ECCE Opole
21. Szlendak JK, Jablonska-Krysiewicz A, Tomaszewicz D (2018) Comparative analysis of oblique
bonded anchors with point anchors fixed in the concrete structural layer of buildings of
large slab. In: 3rd world multidisciplinary civil engineering—architecture—urban planning
symposium; WMCAUS 18–22 June 2018, At Prague, Czech Republic
61
10. Serrano E (2001) Glued-in rods for timber structures—a 3D model and finite element parameter
studies. Int J Adhesion Adhesives 21:115–127
11. Szczecina M, Winnicki A (2016) Selected aspects of computer modeling of reinforced concrete
structures. Archives of Civil Engineering, vol. LXII(1)
12. Nuralinah D (2019) The pull-out test on knit bamboo reinforcement embedded into concrete
beam. MATEC Web Conf 258:1–7
13. Hariyadi MS, Sonoda Y (2017) Experimental analysis of anchor bolt in concrete under the
pull-out loading. Procedia Eng 171:26–933
14. Bažant ZP, ¸
Sener S (1988) Size effect in pullout tests. ACI Mater J 347–351. Technical Paper.
Title No. 85-M38
15. Epackachi S, Esmaili O, Mirghadeli SR, Behbahani AAT (2015) Behavior of adhesive bonded
anchors under tension and shear loads. J Constr Steel Res 114:269–280
16. Hüer T, Eligehausen R (2007) Splitting failure mode of bonded anchors. In: Fracture mechanics
of concrete structures—design, assessment and retrofitting of RC structures, pp 753–760
17. Kijania M (2015) The methods for computation of the bond stress between concrete and steel
reinforcement. Przeglad Budowlany 38–42 (in Polish)
18. Ligocki I (2002) HYSDOZOK—an automated system for applying loads in structural tests.
Konstrukcje Stalowe (3) (in Polish)
19. Hyrczak E, Kolarzowski M (2003) The HYSDOZOK hydraulic system is used to apply structure
loads. Hydraulika i Pneumatyka 4:17–18 (in Polish)
20. Szlendak JK, Jablonska-Krysiewicz A, Tomaszewicz D (2018) Assessment of the load capacity
of the anchorage system connecting the textured layer with the structural wall of large slab
buildings in the lights of experimental research and FEM analysis. In: ECCE Opole
21. Szlendak JK, Jablonska-Krysiewicz A, Tomaszewicz D (2018) Comparative analysis of oblique
bonded anchors with point anchors fixed in the concrete structural layer of buildings of
large slab. In: 3rd world multidisciplinary civil engineering—architecture—urban planning
symposium; WMCAUS 18–22 June 2018, At Prague, Czech Republic