Depernet, D., Narjiss, A., Gustin, F., Hissel, D., & Péra, M. C. (2016).
Integration of electrochemical impedance spectroscopy functionality in proton exchange membrane fuel cell power converter.
International Journal of Hydrogen Energy, 41, 5378–5388. https://
doi.org/10.1016/j.ijhydene.2016.02.010.
Devrim, Y., Erkan, S., Baç, N., & Eroğlu, I. (2009). Preparation and
characterization of sulfonated polysulfone/titanium dioxide composite membranes for proton exchange membrane fuel cells.
International Journal of Hydrogen Energy, 34, 3467–3475.
https://doi.org/10.1016/j.ijhydene.2009.02.019.
Du, Y., & Sammes, N. M. (2004). Fabrication and properties of
anode-supported tubular solid oxide fuel cells. Journal of Power
Sources, 136, 66–71. https://doi.org/10.1016/j.jpowsour.2004.05.
028.
Fatyeyeva, K., Bigarré, J., Blondel, B., Galiano, H., Gaud, D.,
Lecardeur, M., & Poncin-Epaillard, F. (2011). Grafting of
p-styrene sulfonate and 1,3-propane sultone onto Laponite for
proton exchange membrane fuel cell application. Journal of
Membrane Science, 366, 33–42. https://doi.org/10.1016/j.memsci.
2010.09.023.
Harris, J., Lay-Grindler, E., Metcalfe, C., & Kesler, O. (2017).
Degradation of metal-supported cells with Ni-YSZ or
Ni-Ni 3 Sn-YSZ anodes operated with methane-based fuels. ECS
Transactions, 78, 1293–1304. https://doi.org/10.1149/07801.
1293ecst.
He, Y.-L., Miao, Z., & Yang, W.-W. (2012). Characteristics of heat and
mass transport in a passive direct methanol fuel cell operated with
concentrated methanol. Journal of Power Sources, 208, 180–186.
https://doi.org/10.1016/j.jpowsour.2012.02.033.
Heinzel, A., & Barragán, V. M. (1999). A review of the state-of-the-art
of the methanol crossover in direct methanol fuel cells. Journal of
Power Sources, 84, 70–74. https://doi.org/10.1016/S0378-7753(99)
00302-X.
Horri, B. A., Selomulya, C., & Wang, H. (2012). Characteristics of
Ni/YSZ ceramic anode prepared using carbon microspheres as a
pore former. International Journal of Hydrogen Energy, 37, 15311–
15319. https://doi.org/10.1016/j.ijhydene.2012.07.108.
Hua, D., Li, G., Lu, H., Zhang, X., & Fan, P. (2018). Investigation of
carbon formation on Ni/YSZ anode of solid oxide fuel cell from CO
disproportionation reaction. International Communications in Heat
and Mass Transfer, 91, 23–29. https://doi.org/10.1016/j.
icheatmasstransfer.2017.11.014.
Ilbeygi, H., Ismail, A. F., Mayahi, A., Nasef, M. M., Jaafar, J., &
Jalalvandi, E. (2013). Transport properties and direct methanol fuel
cell performance of sulfonated poly (ether ether ketone)/
Cloisite/triaminopyrimidine nanocomposite polymer electrolyte
membrane at moderate temperature. Separation and Purification
Technology, 118, 567–575. https://doi.org/10.1016/j.seppur.2013.
07.044.
Irvine, J. T. S., & Connor, P. (2013). Solid oxide fuels cells: Facts and
figures. London: Springer.
Jamil, S. M., Othman, M. H. D., Mohamed, M. H., Adam, M. R.,
Rahman, M. A., Jaafar, J., & Ismail, A. F. (2018). A novel
single-step fabrication anode/electrolyte/cathode triple-layer hollow
fiber micro-tubular SOFC. International Journal of Hydrogen
Energy, 43, 18509–18515. https://doi.org/10.1016/j.ijhydene.2018.
08.010.
Jamil, S. M., Othman, M. H. D., Rahman, M. A., Jaafar, J., Ismail, A.
F., Honda, S., & Iwamoto, Y. (2019). Properties and performance
evaluation of dual-layer ceramic hollow fiber with modified
electrolyte for MT-SOFC. Renew Energy, 134, 1423–1433.
https://doi.org/10.1016/j.renene.2018.09.071.
Jamil, S. M., Othman, M. H. D., Rahman, M. A., Jaafar, J., Ismail, A.
F., & Li, K. (2015). Recent fabrication techniques for micro-tubular
solid oxide fuel cell support: A review. Journal of the European
Ceramic Society, 35, 1–22. https://doi.org/10.1016/j.jeurceramsoc.
2014.08.034.
Jheng, L., Huang, C., & Hsu, S. L. (2013). Sulfonated MWNT and
imidazole functionalized MWNT/polybenzimidazole composite
membranes for high-temperature proton exchange membrane fuel
cells. International Journal of Hydrogen Energy, 38, 1524–1534.
https://doi.org/10.1016/j.ijhydene.2012.10.111.
Jin, Y. C., Nishida, M., Kanematsu, W., & Hibino, T. (2011). An
H 3 PO 4 -doped polybenzimidazole/Sn 0.95 Al 0.05 P 2 O 7 composite
membrane for high-temperature proton exchange membrane fuel
cells. Journal of Power Sources, 196, 6042–6047. https://doi.org/
10.1016/j.jpowsour.2011.03.094.
Jörissen, L., Gogel, V., Kerres, J., & Garche, J. (2002). New
membranes for direct methanol fuel cells. Journal of Power
Sources, 105, 267–273. https://doi.org/10.1016/S0378-7753(01)
00952-1.
Kannan, R., Aher, P. P., Palaniselvam, T., Kurungot, S., Kharul, U. K.,
& Pillai, V. K. (2010). Artificially designed membranes using
phosphonated multiwall carbon nanotube−polybenzimidazole composites for polymer electrolyte fuel cells. The Journal of Physical
Chemistry Letters, 1, 2109–2113. https://doi.org/10.1021/
jz1007005.
Kaur, G., & Basu, S. (2015). Physical characterization and electrochemical performance of copper-iron-ceria-YSZ anode-based
SOFCs in H 2 and methane fuels. International Journal of Energy
Research, 39, 1345–1354. https://doi.org/10.1002/er.3332.
Kim, D. J., Jo, M. J., & Nam, S. Y. (2015). A review of polymer–
nanocomposite electrolyte membranes for fuel cell application.
Journal of Industrial and Engineering Chemistry, 21, 36–52.
https://doi.org/10.1016/j.jiec.2014.04.030.
Lade, H., Kumar, V., Arthanareeswaran, G., & Ismail, A. F. (2017).
Sulfonated poly(arylene ether sulfone) nanocomposite electrolyte
membrane for fuel cell applications: A review. International
Journal of Hydrogen Energy, 42, 1063–1074. https://doi.org/10.
1016/j.ijhydene.2016.10.038.
Lee, D. C., Yang, H. N., Park, S. H., & Kim, W. J. (2014).
Nafion/graphene oxide composite membranes for low humidifying
polymer electrolyte membrane fuel cell. Journal of Membrane
Science, 452, 20–28. https://doi.org/10.1016/j.memsci.2013.10.018.
Lee, J. G., Jeon, O. S., Hwang, H. J., Jang, J., Lee, Y., Hyun, S. H., &
Shul, Y. G. (2016). Durable and high-performance direct-methane
fuel cells with coke-tolerant ceria-coated Ni catalysts at reduced
temperatures. Electrochimica Acta, 191, 677–686. https://doi.org/
10.1016/j.electacta.2016.01.091.
Li, C., Li, C., Xing, Y., Gao, M., & Yang, G. (2006). Influence of YSZ
electrolyte thickness on the characteristics of plasma-sprayed cermet
supported tubular SOFC. Solid State Ionics, 177, 2065–2069.
https://doi.org/10.1016/j.ssi.2006.03.004.
Li, P., Wang, Z., Yao, X., Hou, N., Fan, L., Gan, T., et al. (2019).
Effect of Sn addition on improving the stability of
Ni-Ce 0.8 Sm 0.2 O 1.9 anode material for solid oxide fuel cells fed
with dry CH 4 . Catalysis Today, 330, 209–216. https://doi.org/10.
1016/j.cattod.2018.04.030.
Li, X., & Faghri, A. (2011). Effect of the cathode open ratios on the
water management of a passive vapor-feed direct methanol fuel cell
fed with neat methanol. Journal of Power Sources, 196, 6318–
6324. https://doi.org/10.1016/j.jpowsour.2011.03.047.
Li, X., & Faghri, A. (2013). Review and advances of direct methanol
fuel cells (DMFCs) part I: Design, fabrication, and testing with high
concentration methanol solutions. Journal of Power Sources, 226,
223–240. https://doi.org/10.1016/j.jpowsour.2012.10.061.
Li, X., Faghri, A., & Xu, C. (2010). Water management of the DMFC
passively fed with a high-concentration methanol solution. International Journal of Hydrogen Energy, 35, 8690–8698. https://doi.
org/10.1016/j.ijhydene.2010.05.033.
Solid Electrolyte Membranes for Low- and High-Temperature …
123
Integration of electrochemical impedance spectroscopy functionality in proton exchange membrane fuel cell power converter.
International Journal of Hydrogen Energy, 41, 5378–5388. https://
doi.org/10.1016/j.ijhydene.2016.02.010.
Devrim, Y., Erkan, S., Baç, N., & Eroğlu, I. (2009). Preparation and
characterization of sulfonated polysulfone/titanium dioxide composite membranes for proton exchange membrane fuel cells.
International Journal of Hydrogen Energy, 34, 3467–3475.
https://doi.org/10.1016/j.ijhydene.2009.02.019.
Du, Y., & Sammes, N. M. (2004). Fabrication and properties of
anode-supported tubular solid oxide fuel cells. Journal of Power
Sources, 136, 66–71. https://doi.org/10.1016/j.jpowsour.2004.05.
028.
Fatyeyeva, K., Bigarré, J., Blondel, B., Galiano, H., Gaud, D.,
Lecardeur, M., & Poncin-Epaillard, F. (2011). Grafting of
p-styrene sulfonate and 1,3-propane sultone onto Laponite for
proton exchange membrane fuel cell application. Journal of
Membrane Science, 366, 33–42. https://doi.org/10.1016/j.memsci.
2010.09.023.
Harris, J., Lay-Grindler, E., Metcalfe, C., & Kesler, O. (2017).
Degradation of metal-supported cells with Ni-YSZ or
Ni-Ni 3 Sn-YSZ anodes operated with methane-based fuels. ECS
Transactions, 78, 1293–1304. https://doi.org/10.1149/07801.
1293ecst.
He, Y.-L., Miao, Z., & Yang, W.-W. (2012). Characteristics of heat and
mass transport in a passive direct methanol fuel cell operated with
concentrated methanol. Journal of Power Sources, 208, 180–186.
https://doi.org/10.1016/j.jpowsour.2012.02.033.
Heinzel, A., & Barragán, V. M. (1999). A review of the state-of-the-art
of the methanol crossover in direct methanol fuel cells. Journal of
Power Sources, 84, 70–74. https://doi.org/10.1016/S0378-7753(99)
00302-X.
Horri, B. A., Selomulya, C., & Wang, H. (2012). Characteristics of
Ni/YSZ ceramic anode prepared using carbon microspheres as a
pore former. International Journal of Hydrogen Energy, 37, 15311–
15319. https://doi.org/10.1016/j.ijhydene.2012.07.108.
Hua, D., Li, G., Lu, H., Zhang, X., & Fan, P. (2018). Investigation of
carbon formation on Ni/YSZ anode of solid oxide fuel cell from CO
disproportionation reaction. International Communications in Heat
and Mass Transfer, 91, 23–29. https://doi.org/10.1016/j.
icheatmasstransfer.2017.11.014.
Ilbeygi, H., Ismail, A. F., Mayahi, A., Nasef, M. M., Jaafar, J., &
Jalalvandi, E. (2013). Transport properties and direct methanol fuel
cell performance of sulfonated poly (ether ether ketone)/
Cloisite/triaminopyrimidine nanocomposite polymer electrolyte
membrane at moderate temperature. Separation and Purification
Technology, 118, 567–575. https://doi.org/10.1016/j.seppur.2013.
07.044.
Irvine, J. T. S., & Connor, P. (2013). Solid oxide fuels cells: Facts and
figures. London: Springer.
Jamil, S. M., Othman, M. H. D., Mohamed, M. H., Adam, M. R.,
Rahman, M. A., Jaafar, J., & Ismail, A. F. (2018). A novel
single-step fabrication anode/electrolyte/cathode triple-layer hollow
fiber micro-tubular SOFC. International Journal of Hydrogen
Energy, 43, 18509–18515. https://doi.org/10.1016/j.ijhydene.2018.
08.010.
Jamil, S. M., Othman, M. H. D., Rahman, M. A., Jaafar, J., Ismail, A.
F., Honda, S., & Iwamoto, Y. (2019). Properties and performance
evaluation of dual-layer ceramic hollow fiber with modified
electrolyte for MT-SOFC. Renew Energy, 134, 1423–1433.
https://doi.org/10.1016/j.renene.2018.09.071.
Jamil, S. M., Othman, M. H. D., Rahman, M. A., Jaafar, J., Ismail, A.
F., & Li, K. (2015). Recent fabrication techniques for micro-tubular
solid oxide fuel cell support: A review. Journal of the European
Ceramic Society, 35, 1–22. https://doi.org/10.1016/j.jeurceramsoc.
2014.08.034.
Jheng, L., Huang, C., & Hsu, S. L. (2013). Sulfonated MWNT and
imidazole functionalized MWNT/polybenzimidazole composite
membranes for high-temperature proton exchange membrane fuel
cells. International Journal of Hydrogen Energy, 38, 1524–1534.
https://doi.org/10.1016/j.ijhydene.2012.10.111.
Jin, Y. C., Nishida, M., Kanematsu, W., & Hibino, T. (2011). An
H 3 PO 4 -doped polybenzimidazole/Sn 0.95 Al 0.05 P 2 O 7 composite
membrane for high-temperature proton exchange membrane fuel
cells. Journal of Power Sources, 196, 6042–6047. https://doi.org/
10.1016/j.jpowsour.2011.03.094.
Jörissen, L., Gogel, V., Kerres, J., & Garche, J. (2002). New
membranes for direct methanol fuel cells. Journal of Power
Sources, 105, 267–273. https://doi.org/10.1016/S0378-7753(01)
00952-1.
Kannan, R., Aher, P. P., Palaniselvam, T., Kurungot, S., Kharul, U. K.,
& Pillai, V. K. (2010). Artificially designed membranes using
phosphonated multiwall carbon nanotube−polybenzimidazole composites for polymer electrolyte fuel cells. The Journal of Physical
Chemistry Letters, 1, 2109–2113. https://doi.org/10.1021/
jz1007005.
Kaur, G., & Basu, S. (2015). Physical characterization and electrochemical performance of copper-iron-ceria-YSZ anode-based
SOFCs in H 2 and methane fuels. International Journal of Energy
Research, 39, 1345–1354. https://doi.org/10.1002/er.3332.
Kim, D. J., Jo, M. J., & Nam, S. Y. (2015). A review of polymer–
nanocomposite electrolyte membranes for fuel cell application.
Journal of Industrial and Engineering Chemistry, 21, 36–52.
https://doi.org/10.1016/j.jiec.2014.04.030.
Lade, H., Kumar, V., Arthanareeswaran, G., & Ismail, A. F. (2017).
Sulfonated poly(arylene ether sulfone) nanocomposite electrolyte
membrane for fuel cell applications: A review. International
Journal of Hydrogen Energy, 42, 1063–1074. https://doi.org/10.
1016/j.ijhydene.2016.10.038.
Lee, D. C., Yang, H. N., Park, S. H., & Kim, W. J. (2014).
Nafion/graphene oxide composite membranes for low humidifying
polymer electrolyte membrane fuel cell. Journal of Membrane
Science, 452, 20–28. https://doi.org/10.1016/j.memsci.2013.10.018.
Lee, J. G., Jeon, O. S., Hwang, H. J., Jang, J., Lee, Y., Hyun, S. H., &
Shul, Y. G. (2016). Durable and high-performance direct-methane
fuel cells with coke-tolerant ceria-coated Ni catalysts at reduced
temperatures. Electrochimica Acta, 191, 677–686. https://doi.org/
10.1016/j.electacta.2016.01.091.
Li, C., Li, C., Xing, Y., Gao, M., & Yang, G. (2006). Influence of YSZ
electrolyte thickness on the characteristics of plasma-sprayed cermet
supported tubular SOFC. Solid State Ionics, 177, 2065–2069.
https://doi.org/10.1016/j.ssi.2006.03.004.
Li, P., Wang, Z., Yao, X., Hou, N., Fan, L., Gan, T., et al. (2019).
Effect of Sn addition on improving the stability of
Ni-Ce 0.8 Sm 0.2 O 1.9 anode material for solid oxide fuel cells fed
with dry CH 4 . Catalysis Today, 330, 209–216. https://doi.org/10.
1016/j.cattod.2018.04.030.
Li, X., & Faghri, A. (2011). Effect of the cathode open ratios on the
water management of a passive vapor-feed direct methanol fuel cell
fed with neat methanol. Journal of Power Sources, 196, 6318–
6324. https://doi.org/10.1016/j.jpowsour.2011.03.047.
Li, X., & Faghri, A. (2013). Review and advances of direct methanol
fuel cells (DMFCs) part I: Design, fabrication, and testing with high
concentration methanol solutions. Journal of Power Sources, 226,
223–240. https://doi.org/10.1016/j.jpowsour.2012.10.061.
Li, X., Faghri, A., & Xu, C. (2010). Water management of the DMFC
passively fed with a high-concentration methanol solution. International Journal of Hydrogen Energy, 35, 8690–8698. https://doi.
org/10.1016/j.ijhydene.2010.05.033.
Solid Electrolyte Membranes for Low- and High-Temperature …
123