300
Mine, Y., Suzuki, S., Eguchi, T., & Murayama, T. (2019). Applying deep artificial neural network
approach to maxillofacial prostheses coloration. Journal of Prosthodontic Research. In press.
https://doi.org/10.1016/j.jpor.2019.08.006.
Mitsouras, D., Liacouras, P., Imanzadeh, A., Giannopoulos, A. A., Cai, T., Kumamaru, K. K.,
George, E., Wake, N., Caterson, E. J., Pomahac, B., Ho, V. B., Grant, G. T., & Rybicki,
F. J. (2015). Medical 3D printing for the radiologist. Radiographics, 35(7), 1965–1988. https://
doi.org/10.1148/rg.2015140320.
Pesqueira, A. A., Goiato, M. C., Dos Santos, D. M., Haddad, M. F., & Moreno, A. (2012). Effect of
disinfection and accelerated ageing on dimensional stability and detail reproduction of a facial
silicone with nanoparticles. Journal of Medical Engineering & Technology, 36(4), 217–221.
https://doi.org/10.3109/03091902.2012.666321.
Petrovic, V., Vicente Haro Gonzalez, J., Jordá Ferrando, O., Delgado Gordillo, J., Ramón Blasco
Puchades, J., & Portolés Griñan, L. (2011). Additive layered manufacturing: Sectors of industrial application shown through case studies. International Journal of Production Research,
49(4), 1061–1079. https://doi.org/10.1080/00207540903479786.
Polyzois, G. L., Hensten-Pettersen, A., & Kullmann, A. (1994). An assessment of the physical
properties and biocompatibility of three silicone elastomers. Journal of Prosthetic Dentistry,
71(5), 500–504. https://doi.org/10.1016/0022-3913(94)90190-2.
Ratner, B. D., Hoffman, A. S., Schoen, F. J., & Lemons, J. E. (2006). Biomaterials science: An
introduction to materials in medicine. MRS Bulletin, 31(1), 58–60. https://doi.org/10.1557/
mrs2006.17.
Roh, S., Parekh, D. P., Bharti, B., Stoyanov, S. D., & Velev, O. D. (2017). 3D printing by multiphase
silicone/water capillary inks. Advanced Materials, 29(30), 1701554. https://doi.org/10.1002/
adma.201701554.
Shankaran, G., Deogade, S. C., & Dhirawani, R. (2016). Fabrication of a cranial prosthesis combined with an ocular prosthesis using rapid prototyping: A case report. Journal of Dentistry
(Tehran, Iran), 13(1), 68–72.
Sherman, L. M. (2009). Additive manufacturing-new capabilities in materials and equipment
advance rapid prototyping and production of short-run parts by "direct digital manufacturing".
Plastics Technology, 55(3), 35.
Stansbury, J. W., & Idacavage, M. J. (2016). 3D printing with polymers: Challenges among
expanding options and opportunities. Dental Materials, 32(1), 54–64. https://doi.org/10.1016/j.
dental.2015.09.018.
Sykes, L. M., Parrott, A. M., Owen, C. P., & Snaddon, D. R. (2004). Applications of rapid prototyping technology in maxillofacial prosthetics. International Journal of Prosthodontics, 17(4),
456–459.
Symes, M. D., Kitson, P. J., Yan, J., Richmond, C. J., Cooper, G. J., Bowman, R. W., Vilbrandt, T.,
& Cronin, L. (2012). Integrated 3D-printed reactionware for chemical synthesis and analysis.
Nature Chemistry, 4(5), 349–354. https://doi.org/10.1038/nchem.1313.
Unkovskiy, A., Spintzyk, S., Brom, J., Huettig, F., & Keutel, C. (2018). Direct 3D printing of silicone facial prostheses: A preliminary experience in digital workflow. The Journal of Prosthetic
Dentistry, 120(2), 303–308. https://doi.org/10.1016/j.prosdent.2017.11.007.
Veres, E. M., Wolfaardt, J. F., & Becker, P. J. (1990). An evaluation of the surface characteristics
of a facial prosthetic elastomer. Part I: Review of the literature on the surface characteristics of
dental materials with maxillofacial prosthetic application. The Journal of Prosthetic Dentistry,
63(2), 193–197. https://doi.org/10.1016/0022-3913(90)90105-l.
Watson, J., & Hatamleh, M. M. (2014). Complete integration of technology for improved reproduction of auricular prostheses. The Journal of Prosthetic Dentistry, 111(5), 430–436. https://
doi.org/10.1016/j.prosdent.2013.07.018.
Zayed, S. M., Alshimy, A. M., & Fahmy, A. E. (2014). Effect of surface treated silicon dioxide
nanoparticles on some mechanical properties of maxillofacial silicone elastomer. International
Journal of Biomaterials, 2014, 750398. https://doi.org/10.1155/2014/750398.
P. Cevik
Mine, Y., Suzuki, S., Eguchi, T., & Murayama, T. (2019). Applying deep artificial neural network
approach to maxillofacial prostheses coloration. Journal of Prosthodontic Research. In press.
https://doi.org/10.1016/j.jpor.2019.08.006.
Mitsouras, D., Liacouras, P., Imanzadeh, A., Giannopoulos, A. A., Cai, T., Kumamaru, K. K.,
George, E., Wake, N., Caterson, E. J., Pomahac, B., Ho, V. B., Grant, G. T., & Rybicki,
F. J. (2015). Medical 3D printing for the radiologist. Radiographics, 35(7), 1965–1988. https://
doi.org/10.1148/rg.2015140320.
Pesqueira, A. A., Goiato, M. C., Dos Santos, D. M., Haddad, M. F., & Moreno, A. (2012). Effect of
disinfection and accelerated ageing on dimensional stability and detail reproduction of a facial
silicone with nanoparticles. Journal of Medical Engineering & Technology, 36(4), 217–221.
https://doi.org/10.3109/03091902.2012.666321.
Petrovic, V., Vicente Haro Gonzalez, J., Jordá Ferrando, O., Delgado Gordillo, J., Ramón Blasco
Puchades, J., & Portolés Griñan, L. (2011). Additive layered manufacturing: Sectors of industrial application shown through case studies. International Journal of Production Research,
49(4), 1061–1079. https://doi.org/10.1080/00207540903479786.
Polyzois, G. L., Hensten-Pettersen, A., & Kullmann, A. (1994). An assessment of the physical
properties and biocompatibility of three silicone elastomers. Journal of Prosthetic Dentistry,
71(5), 500–504. https://doi.org/10.1016/0022-3913(94)90190-2.
Ratner, B. D., Hoffman, A. S., Schoen, F. J., & Lemons, J. E. (2006). Biomaterials science: An
introduction to materials in medicine. MRS Bulletin, 31(1), 58–60. https://doi.org/10.1557/
mrs2006.17.
Roh, S., Parekh, D. P., Bharti, B., Stoyanov, S. D., & Velev, O. D. (2017). 3D printing by multiphase
silicone/water capillary inks. Advanced Materials, 29(30), 1701554. https://doi.org/10.1002/
adma.201701554.
Shankaran, G., Deogade, S. C., & Dhirawani, R. (2016). Fabrication of a cranial prosthesis combined with an ocular prosthesis using rapid prototyping: A case report. Journal of Dentistry
(Tehran, Iran), 13(1), 68–72.
Sherman, L. M. (2009). Additive manufacturing-new capabilities in materials and equipment
advance rapid prototyping and production of short-run parts by "direct digital manufacturing".
Plastics Technology, 55(3), 35.
Stansbury, J. W., & Idacavage, M. J. (2016). 3D printing with polymers: Challenges among
expanding options and opportunities. Dental Materials, 32(1), 54–64. https://doi.org/10.1016/j.
dental.2015.09.018.
Sykes, L. M., Parrott, A. M., Owen, C. P., & Snaddon, D. R. (2004). Applications of rapid prototyping technology in maxillofacial prosthetics. International Journal of Prosthodontics, 17(4),
456–459.
Symes, M. D., Kitson, P. J., Yan, J., Richmond, C. J., Cooper, G. J., Bowman, R. W., Vilbrandt, T.,
& Cronin, L. (2012). Integrated 3D-printed reactionware for chemical synthesis and analysis.
Nature Chemistry, 4(5), 349–354. https://doi.org/10.1038/nchem.1313.
Unkovskiy, A., Spintzyk, S., Brom, J., Huettig, F., & Keutel, C. (2018). Direct 3D printing of silicone facial prostheses: A preliminary experience in digital workflow. The Journal of Prosthetic
Dentistry, 120(2), 303–308. https://doi.org/10.1016/j.prosdent.2017.11.007.
Veres, E. M., Wolfaardt, J. F., & Becker, P. J. (1990). An evaluation of the surface characteristics
of a facial prosthetic elastomer. Part I: Review of the literature on the surface characteristics of
dental materials with maxillofacial prosthetic application. The Journal of Prosthetic Dentistry,
63(2), 193–197. https://doi.org/10.1016/0022-3913(90)90105-l.
Watson, J., & Hatamleh, M. M. (2014). Complete integration of technology for improved reproduction of auricular prostheses. The Journal of Prosthetic Dentistry, 111(5), 430–436. https://
doi.org/10.1016/j.prosdent.2013.07.018.
Zayed, S. M., Alshimy, A. M., & Fahmy, A. E. (2014). Effect of surface treated silicon dioxide
nanoparticles on some mechanical properties of maxillofacial silicone elastomer. International
Journal of Biomaterials, 2014, 750398. https://doi.org/10.1155/2014/750398.
P. Cevik