294
Coastal Engineering: Theory and Practice
Coastal Engineering Research Center (U.S.) (1973). Shore Protection Manual,
Fort Belvoir, Va.: U.S. Army.
Coastal Engineering Research Center (U.S.). (1984). Shore Protection Manual,
Volume I.
Dean, R. G. and Dalrymple, R. A. (1991). Water Wave Mechanics for Engineers and Scientists, Advanced Sériés on Océan Engineering, Vol. 2, World
Scientific, Singapore.
Design of sheet pile walls. (1994), CECW-ED Engineer Manual 1110-2-2504,
U.S. Army Corps of Engineers.
Goda, Y. (2010). Random Seas and Design of Maritime Structures, Advanced
Sériés on Océan Engineering, Vol. 33, World Scientific.
Goda, Y. (1974). Coastal Engineering Manual (2002 in Table VI-5-53,
p. VI-5-139)
Hudson, R. Y. (1959). Laboratory investigation of rubble mound breakwaters,
Proc. ASCE, Vol. 85, No. WW3.
Minikin, R. R., Winds, Waves and Maritime Structures: Studies in Harbour Making and in the Protection of Coasts, 2nd ed., Griffin, London.
Port and Harbours — planning and design: Part 2 “Earth Pressures”, Bureau of
Indian Standards IS 4651.
Punmia, B.C., Ashok Kumar Jain and Arun Kumar Jain (2005). Soil Mechanics
and Foundations, Lakshmi Publications.
Rundgren, L., Water Wave Forces, Bulletin No. 54, Royal Institute of Technology,
Division of Hydraulics, Stockholm, Sweden, 1958.
Saniflou, M. (1928). Treatise on Vertical Breakwaters, Annals des Ponts et
Chaussées, Paris, France.
Tanimoto, K. and Ojima, R. (1983). Experimental study on wave forces acting on
a superstructure of sloping breakwater and on block type composite breakwaters, Tech. Note of Port and Harbour Research Institute No. 450.
Tomlinson, M. J. (1994). Pile Design and Construction Practice, Taylor and
Francis.
Sundar, V., Vengatesan, V., Anandkumar, G. and Schlenkhoff, A. (1988), Hydrodynamic coefficients for inclined cylinders, Océan Engineering, 25(4-5), 277—
294.
Van der Meer, J. W. (2011). Design aspects of breakwaters and sea defences,
5th International Short Conférence on Applied Coastal Research.
Coastal Engineering: Theory and Practice
Coastal Engineering Research Center (U.S.) (1973). Shore Protection Manual,
Fort Belvoir, Va.: U.S. Army.
Coastal Engineering Research Center (U.S.). (1984). Shore Protection Manual,
Volume I.
Dean, R. G. and Dalrymple, R. A. (1991). Water Wave Mechanics for Engineers and Scientists, Advanced Sériés on Océan Engineering, Vol. 2, World
Scientific, Singapore.
Design of sheet pile walls. (1994), CECW-ED Engineer Manual 1110-2-2504,
U.S. Army Corps of Engineers.
Goda, Y. (2010). Random Seas and Design of Maritime Structures, Advanced
Sériés on Océan Engineering, Vol. 33, World Scientific.
Goda, Y. (1974). Coastal Engineering Manual (2002 in Table VI-5-53,
p. VI-5-139)
Hudson, R. Y. (1959). Laboratory investigation of rubble mound breakwaters,
Proc. ASCE, Vol. 85, No. WW3.
Minikin, R. R., Winds, Waves and Maritime Structures: Studies in Harbour Making and in the Protection of Coasts, 2nd ed., Griffin, London.
Port and Harbours — planning and design: Part 2 “Earth Pressures”, Bureau of
Indian Standards IS 4651.
Punmia, B.C., Ashok Kumar Jain and Arun Kumar Jain (2005). Soil Mechanics
and Foundations, Lakshmi Publications.
Rundgren, L., Water Wave Forces, Bulletin No. 54, Royal Institute of Technology,
Division of Hydraulics, Stockholm, Sweden, 1958.
Saniflou, M. (1928). Treatise on Vertical Breakwaters, Annals des Ponts et
Chaussées, Paris, France.
Tanimoto, K. and Ojima, R. (1983). Experimental study on wave forces acting on
a superstructure of sloping breakwater and on block type composite breakwaters, Tech. Note of Port and Harbour Research Institute No. 450.
Tomlinson, M. J. (1994). Pile Design and Construction Practice, Taylor and
Francis.
Sundar, V., Vengatesan, V., Anandkumar, G. and Schlenkhoff, A. (1988), Hydrodynamic coefficients for inclined cylinders, Océan Engineering, 25(4-5), 277—
294.
Van der Meer, J. W. (2011). Design aspects of breakwaters and sea defences,
5th International Short Conférence on Applied Coastal Research.