French
Permalien :
Corrosion of linings and coatings : cathodic and tnhibitor protection and corrosion monitorin
- Date_TXT
- London : CRC Press, 2007
- Auteur
- Philip A. Schweitzer
- Type de document
- Livre
Description :
Corrosion is both costly and dangerous. Billions of dollars are annually spent
for the replacement of corroded structures, machinery, and components,
including metal roofing, condenser tubes, pipelines, and many other items.
In addition to replacement costs are those associated with maintenance to
prevent corrosion, inspections, and the upkeep of cathodically protected
structures and pipelines. Indirect costs of corrosion result from shutdown,
loss of efficiency, and product contamination or loss.
Although the actualreplacement cost of an item may not be high, the loss of
production resulting from the need to shut down an operation to permit the
replacement may amount to hundreds of dollars per hour. When a tank or
pipeline develops a leak, product is lost. If the leak goes undetected for a
period oftime,the value ofthe lost product could be considerable.In addition,
contamination can result from the leaking material, requiring cleanup, and
this can be quite expensive. When corrosion takes place, corrosion products
build up,resulting in reduced flow in pipelines and reduced efficiency of heat
transfer in heat exchangers. Both conditions increase operating costs.
Corrosion products may also be detrimental to the quality of the product
being handled, making it necessary to discard valuable materials.
Premature failure of bridges or structures because of corrosion can also
result in human injury or even loss of life. Failures of operating equipment
resulting from corrosion can have the same disastrous results.
When all of these factors are considered, it becomes obvious why the
potential problem of corrosion should be considered during the early design
stages of any project and why it is necessary to constantly monitor the
integrity of structures, bridges, machinery, and equipment to prevent
premature failures.
To cope with the potential problems of corrosion, it is necessary to
understand