202
X. Agnello J. Naveen et al.
10.3 Air Pollution Control (Double Stage Electrostatic
Precipitator)
Explanation of Cost Analysis Using ROI and CBR for Air Pollution Control
(Double Stage Electrostatic Precipitator)
Air pollution control (Double stage Electrostatic precipitator) is conventional technology with (−135.6 percent ) for Rs.1 investment in terms of ROI is a benefit. The
cost-benefit ratio shows (0.01837) implying there is loss (shown in Table 1). But the
Energy saving 11,000 kWh per annum, Rs. 0.52 lakh per annum.
10.4 Caustic Soda Processing
Explanation of Cost Analysis using ROI and CBR for Caustic soda
Caustic soda processing is a conventional technology ROI for Rs.1 investment is
(−65.31 percent) which is a loss and the cost-benefit ratio of conventional technology
is 0.358 the benefits is less in terms of cost-benefit analysis . But the energy saving
638,720 kWh per annum, Rs. 3.087 lakh per annum.
Advantage: Works on recycling process to neutralize the pH of spray pond and
cleaning substance used in the Falling flow evaporator, Attaching on-line sensors
and automated variable frequency drive, automated flow meters.
Benefits-This is used for internal cleaning purpose of the boiler and energy
conserving technology.
10.5 Cane Cutting Technology
Selecting Seeds
Peeling sugarcane leaves: peeling leaf sheaths of sugarcane seeds first before the
seeds are chopped after the seeds are selected, chopping off tails of lower parts from
growing points for 4 to 5 cm and old stems away from the ground for 80 to 100 cm,
and using most middle sugarcane stems as the sugarcane seeds, Raising nursery
using single-budded chips (conventionally, 2–3 budded sets are used and normally
no nursery is prepared) (Shaochun et al. 2015).
Explanation of Cost Analysis using ROI and CBR for Cane Cutting
Cane cutting processing conventional technology (58.7 percent) for Rs. 1 investment
it’s a gain. In terms of cost benefit ratio conventional technology value is (0.344), the
benefits are high (shown in Table 1). Because this is directly utilized by the farmers
in their farmland due to the yield is high. Cane cutting saving of Rs. 17 lakh per year
X. Agnello J. Naveen et al.
10.3 Air Pollution Control (Double Stage Electrostatic
Precipitator)
Explanation of Cost Analysis Using ROI and CBR for Air Pollution Control
(Double Stage Electrostatic Precipitator)
Air pollution control (Double stage Electrostatic precipitator) is conventional technology with (−135.6 percent ) for Rs.1 investment in terms of ROI is a benefit. The
cost-benefit ratio shows (0.01837) implying there is loss (shown in Table 1). But the
Energy saving 11,000 kWh per annum, Rs. 0.52 lakh per annum.
10.4 Caustic Soda Processing
Explanation of Cost Analysis using ROI and CBR for Caustic soda
Caustic soda processing is a conventional technology ROI for Rs.1 investment is
(−65.31 percent) which is a loss and the cost-benefit ratio of conventional technology
is 0.358 the benefits is less in terms of cost-benefit analysis . But the energy saving
638,720 kWh per annum, Rs. 3.087 lakh per annum.
Advantage: Works on recycling process to neutralize the pH of spray pond and
cleaning substance used in the Falling flow evaporator, Attaching on-line sensors
and automated variable frequency drive, automated flow meters.
Benefits-This is used for internal cleaning purpose of the boiler and energy
conserving technology.
10.5 Cane Cutting Technology
Selecting Seeds
Peeling sugarcane leaves: peeling leaf sheaths of sugarcane seeds first before the
seeds are chopped after the seeds are selected, chopping off tails of lower parts from
growing points for 4 to 5 cm and old stems away from the ground for 80 to 100 cm,
and using most middle sugarcane stems as the sugarcane seeds, Raising nursery
using single-budded chips (conventionally, 2–3 budded sets are used and normally
no nursery is prepared) (Shaochun et al. 2015).
Explanation of Cost Analysis using ROI and CBR for Cane Cutting
Cane cutting processing conventional technology (58.7 percent) for Rs. 1 investment
it’s a gain. In terms of cost benefit ratio conventional technology value is (0.344), the
benefits are high (shown in Table 1). Because this is directly utilized by the farmers
in their farmland due to the yield is high. Cane cutting saving of Rs. 17 lakh per year