29 Experimental Study of Friction Stir Welding …
313
3. A good thin Aluminum plate joint can be produced by using parameter settings
at 910 rpm with a travel speed of 340 mm/min. The joint produced by this setting
gave the highest tensile strength compared to other weld that obtained approximately 195.616 MPa. The tensile strength produced by this joining technique
can be achieved up to 85% strength from the BM.
4. The lowest tensile strength of AA5052 was produced by Specimen 3 with approximately 179.135 MPa which only 78% strength of the BM. All the specimens
obtained a result which is more than the best result which is more than 78%
strength of BM.
Acknowledgements The authors would like to acknowledge Universiti Kuala Lumpur (UniKL)
and Japan Malaysian Institute (JMTI) for providing the required facilities and assistance.
References
1. Rambabu, G., Balaji Naik, D., Venkata Rao, C. H., Srinivasa Rao, K., Madhusudan Reddy, G.:
Optimization of friction stir welding parameters for improved corrosion resistance of AA2219
Aluminum alloy joints. Def. Technol. 11(4), 330–337 (2015)
2. Sun, Y.F., Xu, N., Fujii, H.: The microstructure and mechanical properties of friction stir welded
Cu–30Zn brass alloys. Mater. Sci. Eng. A 589, 228–234 (2019)
3. Setsuhara, Y., Kamiya, T., Yamaura, S.: Novel Structured Metallic and Inorganic Materials.
Springer Nature Singapore (2019)
4. Khourshid, A.M., Sabry, I.: Analysis of welded joints using friction stir welding. Metal Inert
Gas and Tungsten Inert Gas, ETI 7(1), 1–7 (2016)
5. Ismail, A., Awang, M.: Surface hardness of friction stir welded AA6063 pipe. MATEC Web
Conf. 13, 2–6 (2014)
6. Patel, A.R., Kotadiya, D.J., Kapopara, J.M., Dalwadi, C.G., Patel, N.P., Rana, H.G.: Investigation
of mechanical properties for hybrid joint of Aluminium to polymer using friction stir welding
(FSW). Mater. Today 5(2), 4242–4249 (2018)
7. Rai, R., De, A., Bhadeshia, H.K.D.H., DebRoy, T.: Review: friction stir welding tools. Sci.
Technol. Weld. Join. 16(4), 325–342 (2011)
313
3. A good thin Aluminum plate joint can be produced by using parameter settings
at 910 rpm with a travel speed of 340 mm/min. The joint produced by this setting
gave the highest tensile strength compared to other weld that obtained approximately 195.616 MPa. The tensile strength produced by this joining technique
can be achieved up to 85% strength from the BM.
4. The lowest tensile strength of AA5052 was produced by Specimen 3 with approximately 179.135 MPa which only 78% strength of the BM. All the specimens
obtained a result which is more than the best result which is more than 78%
strength of BM.
Acknowledgements The authors would like to acknowledge Universiti Kuala Lumpur (UniKL)
and Japan Malaysian Institute (JMTI) for providing the required facilities and assistance.
References
1. Rambabu, G., Balaji Naik, D., Venkata Rao, C. H., Srinivasa Rao, K., Madhusudan Reddy, G.:
Optimization of friction stir welding parameters for improved corrosion resistance of AA2219
Aluminum alloy joints. Def. Technol. 11(4), 330–337 (2015)
2. Sun, Y.F., Xu, N., Fujii, H.: The microstructure and mechanical properties of friction stir welded
Cu–30Zn brass alloys. Mater. Sci. Eng. A 589, 228–234 (2019)
3. Setsuhara, Y., Kamiya, T., Yamaura, S.: Novel Structured Metallic and Inorganic Materials.
Springer Nature Singapore (2019)
4. Khourshid, A.M., Sabry, I.: Analysis of welded joints using friction stir welding. Metal Inert
Gas and Tungsten Inert Gas, ETI 7(1), 1–7 (2016)
5. Ismail, A., Awang, M.: Surface hardness of friction stir welded AA6063 pipe. MATEC Web
Conf. 13, 2–6 (2014)
6. Patel, A.R., Kotadiya, D.J., Kapopara, J.M., Dalwadi, C.G., Patel, N.P., Rana, H.G.: Investigation
of mechanical properties for hybrid joint of Aluminium to polymer using friction stir welding
(FSW). Mater. Today 5(2), 4242–4249 (2018)
7. Rai, R., De, A., Bhadeshia, H.K.D.H., DebRoy, T.: Review: friction stir welding tools. Sci.
Technol. Weld. Join. 16(4), 325–342 (2011)