262
A. E. U. A. Mancha et al.
this may end up with some cracks as detected on DST003, DST004, and DST
005.
b. Tensile strength with a minimum of 60.94 MPa and a maximum of 112.19 MPa
was found for this dissimilar thickness joining by the friction stir welding process.
Acknowledgements The authors would like to acknowledge Universiti Kuala Lumpur (UniKL)
and Japan-Malaysia Technical Institute (JMTI) for providing the required facilities and technical
assistance.
References
1. Milˇ ci´ c, M., Burzi´ c, Z., Radisavljevi´ c, I., Vuherer, T., Milˇ ci´ c, D., Grabulov, V.: Experimental
investigation of fatigue properties of FSW in AA2024-T351. Procedia Struct. Integr. 13, 1977–
1984 (2018)
2. Klobˇ car, D., Kosec, L., Pietras, A., Smolej, A.: Friction stir welding of aluminium alloy 5083.
Mater. Tehnol. 46(5), 483–488 (2012)
3. Çam, G., Mistikoglu, S.: Recent developments in friction stir welding of Al-alloys. J. Mater.
Eng. Perform. 23(6), 1936–1953 (2014)
4. Silva, A.C.F., Braga, D.F.O., De Figueiredo, M.A.V., Moreira, P.M.G.P.: Friction stir welded
butt joints optimization. Materwiss. Werksttech. 45(11), 1010–1017 (2014)
5. Sukara, N., Ismail, A., Hamid, D.A., Rahman, F.A., Baharudin, B.A, Megat Khalid, P.Z.: A
study on the effect of parameters on the tensile strength of friction stir welded AA6061 1.5
mm thin plate butt joints. In: Öchsner, A. (ed.) Engineering Applications for New Materials
and Technologies. Adv. Struct. Mater. 85, 1–12 (2018)
6. Akinlabi, E.T., Akinlabi, S.A.: Effect of heat input on the properties of dissimilar friction stir
welds of aluminium and copper. Am. J. Mater. Sci. 2(5), 147–152 (2012)
7. Aluminium/Aluminum 5052 alloy (UNS A95052), AZO materials, https://www.azom.com/art
icle.aspx?ArticleID=6626, Accessed 17 Nov 2020
8. Aluminium alloys—aluminium 5083 properties, fabrication and applications, AZO materials,
https://www.azom.com/article.aspx?ArticleID=2804. Accessed 17 Nov 2020
9. I. S. Organisation ISO 25239-5. Friction Stir Welding Aluminum, Quality and Inspection
Requirements, Part 5 1, 1–9 (2011)
10. ASTM E8M (2014) ASTM International: 1–28
11. ASTM E340 (2015) ASTM International: 1–11
12. Ismail, A., Awang, M., Rojan, M.A.: The characteristic of temperature curves for friction stir
welding of aluminium alloy 6063–T6 pipe during tool plunging stage. ARPN J. Eng. Appl.
Sci. 11(1), 277–280 (2016)
13. Iqbal, M.P., Vishwakarma, R.K.: Influence of plunge depth during friction stir welding of
aluminum pipes. Proc. Inst. Mech. Eng., Part B: J. Eng. Manuf., 1–12 (2020)
A. E. U. A. Mancha et al.
this may end up with some cracks as detected on DST003, DST004, and DST
005.
b. Tensile strength with a minimum of 60.94 MPa and a maximum of 112.19 MPa
was found for this dissimilar thickness joining by the friction stir welding process.
Acknowledgements The authors would like to acknowledge Universiti Kuala Lumpur (UniKL)
and Japan-Malaysia Technical Institute (JMTI) for providing the required facilities and technical
assistance.
References
1. Milˇ ci´ c, M., Burzi´ c, Z., Radisavljevi´ c, I., Vuherer, T., Milˇ ci´ c, D., Grabulov, V.: Experimental
investigation of fatigue properties of FSW in AA2024-T351. Procedia Struct. Integr. 13, 1977–
1984 (2018)
2. Klobˇ car, D., Kosec, L., Pietras, A., Smolej, A.: Friction stir welding of aluminium alloy 5083.
Mater. Tehnol. 46(5), 483–488 (2012)
3. Çam, G., Mistikoglu, S.: Recent developments in friction stir welding of Al-alloys. J. Mater.
Eng. Perform. 23(6), 1936–1953 (2014)
4. Silva, A.C.F., Braga, D.F.O., De Figueiredo, M.A.V., Moreira, P.M.G.P.: Friction stir welded
butt joints optimization. Materwiss. Werksttech. 45(11), 1010–1017 (2014)
5. Sukara, N., Ismail, A., Hamid, D.A., Rahman, F.A., Baharudin, B.A, Megat Khalid, P.Z.: A
study on the effect of parameters on the tensile strength of friction stir welded AA6061 1.5
mm thin plate butt joints. In: Öchsner, A. (ed.) Engineering Applications for New Materials
and Technologies. Adv. Struct. Mater. 85, 1–12 (2018)
6. Akinlabi, E.T., Akinlabi, S.A.: Effect of heat input on the properties of dissimilar friction stir
welds of aluminium and copper. Am. J. Mater. Sci. 2(5), 147–152 (2012)
7. Aluminium/Aluminum 5052 alloy (UNS A95052), AZO materials, https://www.azom.com/art
icle.aspx?ArticleID=6626, Accessed 17 Nov 2020
8. Aluminium alloys—aluminium 5083 properties, fabrication and applications, AZO materials,
https://www.azom.com/article.aspx?ArticleID=2804. Accessed 17 Nov 2020
9. I. S. Organisation ISO 25239-5. Friction Stir Welding Aluminum, Quality and Inspection
Requirements, Part 5 1, 1–9 (2011)
10. ASTM E8M (2014) ASTM International: 1–28
11. ASTM E340 (2015) ASTM International: 1–11
12. Ismail, A., Awang, M., Rojan, M.A.: The characteristic of temperature curves for friction stir
welding of aluminium alloy 6063–T6 pipe during tool plunging stage. ARPN J. Eng. Appl.
Sci. 11(1), 277–280 (2016)
13. Iqbal, M.P., Vishwakarma, R.K.: Influence of plunge depth during friction stir welding of
aluminum pipes. Proc. Inst. Mech. Eng., Part B: J. Eng. Manuf., 1–12 (2020)