181
References
Yip, W.S., S. To, and Zh. Sun. 2021. Hybrid ultrasonic vibration and magnetic field assisted
diamond cutting of titanium alloys. Journal of Manufacturing Processes 62:743–752.
https://doi .org /10 .1016 /j .jmapro .2020 .12 .037
Yogeswaran, R., and P. Pitchipoo. 2020. Characterization and machining analysis of AA3003
honeycomb sandwich. Materials Today: Proceedings 28(Part 1):4–7. https://doi .org /10 .
1016 /j .matpr .2019 .12 .101
Yu, Z.X., Y.Z. Ma, Y.L. Zhao, J.B. Huang, W.Z. Wang, M. Moliere, and H.L. Liao. 2017.
Effect of precursor solutions on ZnO film via solution precursor plasma spray and corresponding gas sensing performances. Applied Surface Science 412:683–689. https://
doi .org /10 .1016 /j .apsusc .2017 .03 .217
Zenisek, J., N. Wild, and J. Wolfartsberger. 2021. Investigating the potential of smart manufacturing technologies. Procedia Computer Science 180:507–516. https://doi .org /10 .
1016 /j .procs .2021 .01 .269
Zeuner, M., and S. Kontke. 2012. Ion beam figuring technology in optics manufacturing.
Optik & Photonik 2:56–58.
Zhang, H.-C., C.-N. Yu, Y. Liang, G.-X. Lin, and C. Meng. 2019. Foaming behavior and
microcellular morphologies of incompatible SAN/CPE blends with supercritical carbon dioxide as a physical blowing agent. Polymers 11(1):89. https://doi .org /10 .3390 /
polym11010089
Zhang, J., Y. Jian, X. Zhao, D. Meng, F. Pan, and Q. Han. 2021. The tribological behavior of
a surface-nanocrystallized magnesium alloy AZ31 sheet after ultrasonic shot peening
treatment. Journal of Magnesium and Alloys. Article in press. https://doi .org /10 .1016 /j .
jma .2020 .11 .012
Zhang, J.Sh. 2010. High Temperature Deformation and Fracture of Materials. Cambridge,
UK: Woodhead Publishing. https://doi .org /10 .1533 /9780857090805 .1 .154
Zhang, P., X. Guo, X. Ren, Zh. Chen, and Ch. Shen. 2018. Development of Mo(Si,Al) 2 -MoB
composite coatings to protect TZM alloy against oxidation at 1400 °C. Intermetallics
93:134–140. https://doi .org /10 .1016 /j .intermet .2017 .12 .002
Zhang, X., and X. Ming. 2021. An implementation for smart manufacturing information system (SMIS) from an industrial practice survey. Computers & Industrial Engineering
151:106938. https://doi .org /10 .1016 /j .cie .2020 .106938
Zhang, X., W. Fan, and T. Liu. 2020. Fused deposition modeling 3D printing of polyamidebased composites and its applications. Composites Communications 21:100413. https://
doi .org /10 .1016 /j .coco .2020 .100413
Zhang, Y., and X. Xu. 2019. Influence of surface topography evolution of grinding wheel on the
optimal material removal rate in grinding process of cemented carbide. International
Journal of Refractory Metals and Hard Materials 80:130–143. https://doi .org /10 .1016 /
j .ijrmhm .2019 .01 .009
Zhang, Y.-L., Q.-D. Chen, H. Xia, and H.-B. Sun. 2010. Designable 3D nanofabrication by
femtosecond laser direct writing. Nano Today 5(5):435–448. https://doi .org /10 .1016 /j .
nantod .2010 .08 .007
Zhang, Z.P., M.Zh. Rong, and M.Q. Zhang. 2018. Polymer engineering based on reversible
covalent chemistry: A promising innovative pathway towards new materials and new
functionalities. Progress in Polymer Science 80:39–93. https://doi .org /10 .1016 /j .progpolymsci .2018 .03 .002
Zhao, J., Y. Qiao, G. Wang, Ch. Wang, and Ch.B. Park. 2020. Lightweight and tough PP/talc
composite foam with bimodal nanoporous structure achieved by microcellular injection
molding. Materials & Design 195:109051. https://doi .org /10 .1016 /j .matdes .2020 .109051
Zhao, J., J. Huang, Y. Xiang, R. Wang, X. Xu, Sh. Ji, and W. Hang. 2021. Effect of a protective coating on the surface integrity of a microchannel produced by microultrasonic
machining. Journal of Manufacturing Processes 61:280–295. https://doi .org /10 .1016 /j .
jmapro .2020 .11 .027
References
Yip, W.S., S. To, and Zh. Sun. 2021. Hybrid ultrasonic vibration and magnetic field assisted
diamond cutting of titanium alloys. Journal of Manufacturing Processes 62:743–752.
https://doi .org /10 .1016 /j .jmapro .2020 .12 .037
Yogeswaran, R., and P. Pitchipoo. 2020. Characterization and machining analysis of AA3003
honeycomb sandwich. Materials Today: Proceedings 28(Part 1):4–7. https://doi .org /10 .
1016 /j .matpr .2019 .12 .101
Yu, Z.X., Y.Z. Ma, Y.L. Zhao, J.B. Huang, W.Z. Wang, M. Moliere, and H.L. Liao. 2017.
Effect of precursor solutions on ZnO film via solution precursor plasma spray and corresponding gas sensing performances. Applied Surface Science 412:683–689. https://
doi .org /10 .1016 /j .apsusc .2017 .03 .217
Zenisek, J., N. Wild, and J. Wolfartsberger. 2021. Investigating the potential of smart manufacturing technologies. Procedia Computer Science 180:507–516. https://doi .org /10 .
1016 /j .procs .2021 .01 .269
Zeuner, M., and S. Kontke. 2012. Ion beam figuring technology in optics manufacturing.
Optik & Photonik 2:56–58.
Zhang, H.-C., C.-N. Yu, Y. Liang, G.-X. Lin, and C. Meng. 2019. Foaming behavior and
microcellular morphologies of incompatible SAN/CPE blends with supercritical carbon dioxide as a physical blowing agent. Polymers 11(1):89. https://doi .org /10 .3390 /
polym11010089
Zhang, J., Y. Jian, X. Zhao, D. Meng, F. Pan, and Q. Han. 2021. The tribological behavior of
a surface-nanocrystallized magnesium alloy AZ31 sheet after ultrasonic shot peening
treatment. Journal of Magnesium and Alloys. Article in press. https://doi .org /10 .1016 /j .
jma .2020 .11 .012
Zhang, J.Sh. 2010. High Temperature Deformation and Fracture of Materials. Cambridge,
UK: Woodhead Publishing. https://doi .org /10 .1533 /9780857090805 .1 .154
Zhang, P., X. Guo, X. Ren, Zh. Chen, and Ch. Shen. 2018. Development of Mo(Si,Al) 2 -MoB
composite coatings to protect TZM alloy against oxidation at 1400 °C. Intermetallics
93:134–140. https://doi .org /10 .1016 /j .intermet .2017 .12 .002
Zhang, X., and X. Ming. 2021. An implementation for smart manufacturing information system (SMIS) from an industrial practice survey. Computers & Industrial Engineering
151:106938. https://doi .org /10 .1016 /j .cie .2020 .106938
Zhang, X., W. Fan, and T. Liu. 2020. Fused deposition modeling 3D printing of polyamidebased composites and its applications. Composites Communications 21:100413. https://
doi .org /10 .1016 /j .coco .2020 .100413
Zhang, Y., and X. Xu. 2019. Influence of surface topography evolution of grinding wheel on the
optimal material removal rate in grinding process of cemented carbide. International
Journal of Refractory Metals and Hard Materials 80:130–143. https://doi .org /10 .1016 /
j .ijrmhm .2019 .01 .009
Zhang, Y.-L., Q.-D. Chen, H. Xia, and H.-B. Sun. 2010. Designable 3D nanofabrication by
femtosecond laser direct writing. Nano Today 5(5):435–448. https://doi .org /10 .1016 /j .
nantod .2010 .08 .007
Zhang, Z.P., M.Zh. Rong, and M.Q. Zhang. 2018. Polymer engineering based on reversible
covalent chemistry: A promising innovative pathway towards new materials and new
functionalities. Progress in Polymer Science 80:39–93. https://doi .org /10 .1016 /j .progpolymsci .2018 .03 .002
Zhao, J., Y. Qiao, G. Wang, Ch. Wang, and Ch.B. Park. 2020. Lightweight and tough PP/talc
composite foam with bimodal nanoporous structure achieved by microcellular injection
molding. Materials & Design 195:109051. https://doi .org /10 .1016 /j .matdes .2020 .109051
Zhao, J., J. Huang, Y. Xiang, R. Wang, X. Xu, Sh. Ji, and W. Hang. 2021. Effect of a protective coating on the surface integrity of a microchannel produced by microultrasonic
machining. Journal of Manufacturing Processes 61:280–295. https://doi .org /10 .1016 /j .
jmapro .2020 .11 .027