175
References
Segal, V. 2018. Review: Modes and processes of severe plastic deformation (SPD). Materials
11:1175. https://doi .org /10 .3390 /ma11071175
Semenikhin, B.A., L.P. Kuznetsova, and V.I. Kozlikin. 2020. The use of hard alloy waste in
composite galvanic coatings for the restoration of car parts. Solid State Phenomena
299:258–263. https://doi .org /10 .4028 /www .scientific .net /ssp .299 .258
Senthil, J., M. Prabhahar, C. Thiagarajan, S. Prakash, and R. Lakshmanan. 2020. Studies on
performance and process improvement of implementing novel vacuum process for new
age castings. Materials Today: Proceedings 33(Part 1):813–819. https://doi .org /10 .1016 /
j .matpr .2020 .06 .269
Seo, D., M. Sayar, and K. Ogawa. 2012. SiO 2 and MoSi 2 formation on Inconel 625 surface
via SiC coating deposited by cold spray. Surface and Coatings Technology 206(11–
12):2851–2858. https://doi .org /10 .1016 /j .surfcoat .2011 .12 .010
Shang, S.M., and W. Zeng. 2013. Conductive nanofibres and nanocoatings for smart textiles.
In: T. Kirstein (Ed.), Multidisciplinary Know-How for Smart-Textiles Developers, pp.
92–128. Cambridge, UK: Woodhead Publishing. https://doi .org /10 .1533 /978085709353
0 .1 .92
Shekhar, M., and S.K.S. Yadav. 2020. Diamond abrasive based cutting tool for processing of advanced engineering materials: A review. Materials Today: Proceedings 22
(Part 4):3126–3135. https://doi .org /10 .1016 /j .matpr .2020 .03 .449
Shen, L., J. Zhao, Y. Zhang, and G. Quan. 2021. Performance evaluation of titanium-based
metal nitride coatings and die lifetime prediction in a cold extrusion process. High
Temperature Materials and Processes 40(1):108–120. https://doi .org /10 .1515 /htmp -
2021 -0019
Shoemaker, R. 2003. Principles. In: C. Webb, and J. Jones (Eds.), Handbook of Laser
Technology and Applications. Vol. 1, pp. 3–4. Boca Raton, FL: CRC Press. https://doi .
org /10 .1201 /NOE0750309608
Shourgeshty, M., M. Aliofkhazraei, and M.M. Alipour. 2016. Introduction to High‐Temperature
Coatings. London: InTechOpen. https://doi .org /10 .5772 /64282
Shri Prakash, B., S. Senthil Kumar, and S.T. Aruna. 2017. Microstructure and performance of
LSM/YSZ based solid oxide fuel cell cathodes fabricated from solution combustion cosynthesized powders and by solution precursor plasma spraying. Surface and Coatings
Technology 310:25–32. https://doi .org /10 .1016 /j .surfcoat .2016 .12 .004
Shrivastava, A., S.A. Kumar, R. Samrat, B.K. Nagesha, B. Sanjay, and T.N. Suresh. 2021.
Remanufacturing of nickel-based aero-engine components using metal additive manufacturing technology. Materials Today: Proceedings 45(Part 6):4893–4897. https://doi .
org /10 .1016 /j .matpr .2021 .01 .355
Shukla, P., and J. Lawrence. 2015. Characterization and modification of technical ceramics through laser surface engineering. In: J. Lawrence, and D.G. Waugh (Eds.), Laser
Surface Engineering, pp. 107–134. Cambridge, UK: Woodhead Publishing. https://doi .
org /10 .1016 /B978 -1 -78242 -074 -3 .00005-2
Shutov, F.A., G. Henrici-Olivé, and S. Olivé. 1986. Injection molding: Gas counter pressure
process. In: Henrici-Olivé G., and S. Olivé (Eds.), Integral/Structural Polymer Foams.
Berlin – Heidelberg: Springer. https://doi .org /10 .1007 /978 -3 -662 -02486 -7_6
Siddiqui, A.A., and A.K. Dubey. 2021. Recent trends in laser cladding and surface alloying.
Optics & Laser Technology 134:106619. https://doi .org /10 .1016 /j .optlastec .2020 .106619
Sikarwar, V.S., M. Hrabovský, G. Van Oost, M. Pohořelý, and M. Jeremiáš. 2020. Progress
in waste utilization via thermal plasma. Progress in Energy and Combustion Science
81:100873. https://doi .org /10 .1016 /j .pecs .2020 .100873
Simonenko, E.P., D.V. Sevast’yanov, N.P. Simonenko, V.G. Sevast’yanov, and N.T. Kuznetsov.
2013. Promising ultra-high-temperature ceramic materials for aerospace applications. Russian Journal of Inorganic Chemistry 58:1669–1693. https://doi .org /10 .1134 /
S0036023613140039
References
Segal, V. 2018. Review: Modes and processes of severe plastic deformation (SPD). Materials
11:1175. https://doi .org /10 .3390 /ma11071175
Semenikhin, B.A., L.P. Kuznetsova, and V.I. Kozlikin. 2020. The use of hard alloy waste in
composite galvanic coatings for the restoration of car parts. Solid State Phenomena
299:258–263. https://doi .org /10 .4028 /www .scientific .net /ssp .299 .258
Senthil, J., M. Prabhahar, C. Thiagarajan, S. Prakash, and R. Lakshmanan. 2020. Studies on
performance and process improvement of implementing novel vacuum process for new
age castings. Materials Today: Proceedings 33(Part 1):813–819. https://doi .org /10 .1016 /
j .matpr .2020 .06 .269
Seo, D., M. Sayar, and K. Ogawa. 2012. SiO 2 and MoSi 2 formation on Inconel 625 surface
via SiC coating deposited by cold spray. Surface and Coatings Technology 206(11–
12):2851–2858. https://doi .org /10 .1016 /j .surfcoat .2011 .12 .010
Shang, S.M., and W. Zeng. 2013. Conductive nanofibres and nanocoatings for smart textiles.
In: T. Kirstein (Ed.), Multidisciplinary Know-How for Smart-Textiles Developers, pp.
92–128. Cambridge, UK: Woodhead Publishing. https://doi .org /10 .1533 /978085709353
0 .1 .92
Shekhar, M., and S.K.S. Yadav. 2020. Diamond abrasive based cutting tool for processing of advanced engineering materials: A review. Materials Today: Proceedings 22
(Part 4):3126–3135. https://doi .org /10 .1016 /j .matpr .2020 .03 .449
Shen, L., J. Zhao, Y. Zhang, and G. Quan. 2021. Performance evaluation of titanium-based
metal nitride coatings and die lifetime prediction in a cold extrusion process. High
Temperature Materials and Processes 40(1):108–120. https://doi .org /10 .1515 /htmp -
2021 -0019
Shoemaker, R. 2003. Principles. In: C. Webb, and J. Jones (Eds.), Handbook of Laser
Technology and Applications. Vol. 1, pp. 3–4. Boca Raton, FL: CRC Press. https://doi .
org /10 .1201 /NOE0750309608
Shourgeshty, M., M. Aliofkhazraei, and M.M. Alipour. 2016. Introduction to High‐Temperature
Coatings. London: InTechOpen. https://doi .org /10 .5772 /64282
Shri Prakash, B., S. Senthil Kumar, and S.T. Aruna. 2017. Microstructure and performance of
LSM/YSZ based solid oxide fuel cell cathodes fabricated from solution combustion cosynthesized powders and by solution precursor plasma spraying. Surface and Coatings
Technology 310:25–32. https://doi .org /10 .1016 /j .surfcoat .2016 .12 .004
Shrivastava, A., S.A. Kumar, R. Samrat, B.K. Nagesha, B. Sanjay, and T.N. Suresh. 2021.
Remanufacturing of nickel-based aero-engine components using metal additive manufacturing technology. Materials Today: Proceedings 45(Part 6):4893–4897. https://doi .
org /10 .1016 /j .matpr .2021 .01 .355
Shukla, P., and J. Lawrence. 2015. Characterization and modification of technical ceramics through laser surface engineering. In: J. Lawrence, and D.G. Waugh (Eds.), Laser
Surface Engineering, pp. 107–134. Cambridge, UK: Woodhead Publishing. https://doi .
org /10 .1016 /B978 -1 -78242 -074 -3 .00005-2
Shutov, F.A., G. Henrici-Olivé, and S. Olivé. 1986. Injection molding: Gas counter pressure
process. In: Henrici-Olivé G., and S. Olivé (Eds.), Integral/Structural Polymer Foams.
Berlin – Heidelberg: Springer. https://doi .org /10 .1007 /978 -3 -662 -02486 -7_6
Siddiqui, A.A., and A.K. Dubey. 2021. Recent trends in laser cladding and surface alloying.
Optics & Laser Technology 134:106619. https://doi .org /10 .1016 /j .optlastec .2020 .106619
Sikarwar, V.S., M. Hrabovský, G. Van Oost, M. Pohořelý, and M. Jeremiáš. 2020. Progress
in waste utilization via thermal plasma. Progress in Energy and Combustion Science
81:100873. https://doi .org /10 .1016 /j .pecs .2020 .100873
Simonenko, E.P., D.V. Sevast’yanov, N.P. Simonenko, V.G. Sevast’yanov, and N.T. Kuznetsov.
2013. Promising ultra-high-temperature ceramic materials for aerospace applications. Russian Journal of Inorganic Chemistry 58:1669–1693. https://doi .org /10 .1134 /
S0036023613140039