184
The Chemistry and Technology of Petroleum
Sarathi, P.S., Roark, D., and Strycker, A.R. 1988. Light oil steamflooding: A laboratory study. Paper No.
SPE 17447. Proceedings of the 58th Annual California Regional Meeting of the SPE. Bakersfield, CA,
pp. 431–442, March 23–25.
Sharpe, H.N., Richardson, W.C., and Lolley, C.S. 1995. Representation of steam distillation and in situ upgrading processes in heavy oil simulation. SPE 30301.
Shennan, J.L. and Levi, J.D. 1987. In situ microbial enhanced oil recovery. In Biosurfactants and Biotechnology,
N. Kosaric, W.L. Cairns, and N.C.C. Gray (Eds.). Marcel Dekker, New York, pp. 163–180.
Shin, H. and Polikar, M. 2004. Review of reservoir parameter to optimize SAGD and FAST-SAGD operating conditions. Paper No. 2004-211. Proceedings of the Canadian International Petroleum Conference
(CIPC ), Petroleum Society, Canadian Institute of Mining, Metallurgy & Petroleum, Calgary, Alberta,
Canada, October 9–12.
Shin, H. and Polikar, M. 2005. Optimizing the SAGD process in three major Canadian oil-sand areas. Paper No.
SPE 95754. Proceedings of the SPE Annual Technical Conference and Exhibition, Dallas, TX, October.
Shu, W.R. 1984. A viscosity correlation for mixtures of heavy oil, bitumen, and petroleum fractions. Society of
Petroleum Engineers Journal 24(3): 277–292.
Speight, J.G. 1979. Studies on bitumen fractionation—(a) Fractionation by a cryoscopic method (b) Effect of
solvent type on asphaltene solubility. Information Series No. 84, Alberta Research Council, Edmonton,
Alberta, Canada.
Speight, J.G. 2000. The Desulfurization of Heavy Oils and Residua, 2nd edn. Marcel Dekker Inc., New York.
Speight, J.G. 2004. Petroleum asphaltenes Part 2: The effect of asphaltene and resin constituents on recovery
and refining processes. Revue Institut Français du Pétrole—Oil & Gas Science and Technology 59(5):
479–488.
Speight, J.G. 2007. The Chemistry and Technology of Petroleum, 4th edn. CRC Press, Taylor & Francis Group,
Boca Raton, FL.
Speight, J.G. 2009. Enhanced Recovery Methods for Heavy Oil and Tar Sands. Gulf Publishing Company,
Houston, TX.
Speight, J.G. 2011. The Refinery of the Future. Gulf Professional Publishing, Elsevier, Oxford, U.K.
Speight, J.G. 2012. Visbreaking: A technology of the past and the future. Scientia Iranica 19(3): 569–573.
Speight, J.G. 2013. Oil Sand Production Processes. Gulf Professional Publishing, Elsevier, Oxford, U.K.
Stosur, G.J. 1991. Unconventional EOR concepts. Critical Reports on Applied Chemistry 33: 341–373.
Van Hamme, J.D., Singh, A., and Ward, O.P. 2003. Recent advances in petroleum microbiology. Microbiology
and Molecular Biology Reviews 67: 503–549.
Volek, C.W. and Pryor, J.A. 1972. Steam distillation drive—Brea Field, California. Journal of Petroleum
Technology 24(8): 899–906.
Weissman, J.G. 1997. Review of processes for downhole catalytic upgrading of heavy crude oil. Fuel Process
Technology 50(2–3): 199.
Weissman, J.G. and Kessler, R.V. 1996. Downhole heavy crude oil hydroprocessing. Applied Catalysis A:
General 140(1): 16.
Wu, C.H. and Brown, A. 1975. A laboratory study on steam distillation in porous media. Paper No. 5569.
Proceedings. 1975 SPE Annual Meeting, Dallas, TX, September 28–October 1.
Xia, T.X., Greaves, M., Werfilli, W.S., and Rathbone, R.R. 2002. Downhole conversion of Lloydminster heavy
oil using THAI-CAPRI processes. SPE 78998.
Yang, C. and Gu, Y. 2005a. A novel experimental technique for studying solvent mass transfer and oil swelling effect in a vapor extraction (VAPEX) process. Paper No. 2005-099. Proceedings of the 56th Annual
Technical Meeting. The Canadian International Petroleum Conference, Calgary, Alberta, Canada, June 7–9.
Yang, C. and Gu, Y. 2005b. Effects of solvent-heavy oil interfacial tension on gravity drainage in the VAPEX
process. Paper No. SPE 97906. Society of Petroleum Engineers International Thermal Operations and
Heavy Oil Symposium, Calgary, Alberta, Canada, November 1–3.
Zaki, N.N., Poindexter, M.K., and Kilpatrick, P.K. 2002. Factors contributing to petroleum foaming. 2.
Synthetic crude oil systems. Energy & Fuels 16: 711–717.
The Chemistry and Technology of Petroleum
Sarathi, P.S., Roark, D., and Strycker, A.R. 1988. Light oil steamflooding: A laboratory study. Paper No.
SPE 17447. Proceedings of the 58th Annual California Regional Meeting of the SPE. Bakersfield, CA,
pp. 431–442, March 23–25.
Sharpe, H.N., Richardson, W.C., and Lolley, C.S. 1995. Representation of steam distillation and in situ upgrading processes in heavy oil simulation. SPE 30301.
Shennan, J.L. and Levi, J.D. 1987. In situ microbial enhanced oil recovery. In Biosurfactants and Biotechnology,
N. Kosaric, W.L. Cairns, and N.C.C. Gray (Eds.). Marcel Dekker, New York, pp. 163–180.
Shin, H. and Polikar, M. 2004. Review of reservoir parameter to optimize SAGD and FAST-SAGD operating conditions. Paper No. 2004-211. Proceedings of the Canadian International Petroleum Conference
(CIPC ), Petroleum Society, Canadian Institute of Mining, Metallurgy & Petroleum, Calgary, Alberta,
Canada, October 9–12.
Shin, H. and Polikar, M. 2005. Optimizing the SAGD process in three major Canadian oil-sand areas. Paper No.
SPE 95754. Proceedings of the SPE Annual Technical Conference and Exhibition, Dallas, TX, October.
Shu, W.R. 1984. A viscosity correlation for mixtures of heavy oil, bitumen, and petroleum fractions. Society of
Petroleum Engineers Journal 24(3): 277–292.
Speight, J.G. 1979. Studies on bitumen fractionation—(a) Fractionation by a cryoscopic method (b) Effect of
solvent type on asphaltene solubility. Information Series No. 84, Alberta Research Council, Edmonton,
Alberta, Canada.
Speight, J.G. 2000. The Desulfurization of Heavy Oils and Residua, 2nd edn. Marcel Dekker Inc., New York.
Speight, J.G. 2004. Petroleum asphaltenes Part 2: The effect of asphaltene and resin constituents on recovery
and refining processes. Revue Institut Français du Pétrole—Oil & Gas Science and Technology 59(5):
479–488.
Speight, J.G. 2007. The Chemistry and Technology of Petroleum, 4th edn. CRC Press, Taylor & Francis Group,
Boca Raton, FL.
Speight, J.G. 2009. Enhanced Recovery Methods for Heavy Oil and Tar Sands. Gulf Publishing Company,
Houston, TX.
Speight, J.G. 2011. The Refinery of the Future. Gulf Professional Publishing, Elsevier, Oxford, U.K.
Speight, J.G. 2012. Visbreaking: A technology of the past and the future. Scientia Iranica 19(3): 569–573.
Speight, J.G. 2013. Oil Sand Production Processes. Gulf Professional Publishing, Elsevier, Oxford, U.K.
Stosur, G.J. 1991. Unconventional EOR concepts. Critical Reports on Applied Chemistry 33: 341–373.
Van Hamme, J.D., Singh, A., and Ward, O.P. 2003. Recent advances in petroleum microbiology. Microbiology
and Molecular Biology Reviews 67: 503–549.
Volek, C.W. and Pryor, J.A. 1972. Steam distillation drive—Brea Field, California. Journal of Petroleum
Technology 24(8): 899–906.
Weissman, J.G. 1997. Review of processes for downhole catalytic upgrading of heavy crude oil. Fuel Process
Technology 50(2–3): 199.
Weissman, J.G. and Kessler, R.V. 1996. Downhole heavy crude oil hydroprocessing. Applied Catalysis A:
General 140(1): 16.
Wu, C.H. and Brown, A. 1975. A laboratory study on steam distillation in porous media. Paper No. 5569.
Proceedings. 1975 SPE Annual Meeting, Dallas, TX, September 28–October 1.
Xia, T.X., Greaves, M., Werfilli, W.S., and Rathbone, R.R. 2002. Downhole conversion of Lloydminster heavy
oil using THAI-CAPRI processes. SPE 78998.
Yang, C. and Gu, Y. 2005a. A novel experimental technique for studying solvent mass transfer and oil swelling effect in a vapor extraction (VAPEX) process. Paper No. 2005-099. Proceedings of the 56th Annual
Technical Meeting. The Canadian International Petroleum Conference, Calgary, Alberta, Canada, June 7–9.
Yang, C. and Gu, Y. 2005b. Effects of solvent-heavy oil interfacial tension on gravity drainage in the VAPEX
process. Paper No. SPE 97906. Society of Petroleum Engineers International Thermal Operations and
Heavy Oil Symposium, Calgary, Alberta, Canada, November 1–3.
Zaki, N.N., Poindexter, M.K., and Kilpatrick, P.K. 2002. Factors contributing to petroleum foaming. 2.
Synthetic crude oil systems. Energy & Fuels 16: 711–717.