173. Kuila T, Bose S, Hong CE, Uddin ME, Khanra P, Kim NH, Lee JH (2011) Preparation of
functionalized graphene/linear low density polyethylene composites by a solution mixing
method. Carbon 49:1033–1037
174. Kim H, Kobayashi S, AbdurRahim MA, Zhang MJ, Khusainova A, Hillmyer MA, Abdala
AA, Macosko CW (2011) Graphene/polyethylene nanocomposites: effect of polyethylene
functionalization and blending methods. Polymer 52:1837–1846
175. Xu J-Z, Chen C, Wang Y, Tang H, Li Z-M, Hsiao BS (2011) Graphene nanosheets and shear
flow induced crystallization in isotactic polypropylene nanocomposites. Macromolecules
44:2808–2818
176. Choi B, Lee J, Lee S, Ko J-H, Lee K-S, Oh J, Han J, Kim Y-H, Choi IS, Park S (2013)
Generation of ultra-high-molecular-weight polyethylene from metallocenes immobilized
onto N-doped graphene nanoplatelets. Macromol Rapid Commun 34(6):533–538.
doi:10.1002/marc.201200768
177. Anselm M (2012) Polyethylen- und Polyoctenamer-Nanokomposite durch Katalytische
Polymerisation in Gegenwart von funktionalisierten Graphenen. PhD thesis, AlbertLudwigs-University of Freiburg
178. Capiati NJ, Porter RS (1975) Tensile properties of ultradrawn polyethylene. J Polym Sci
Polym Phys Ed 13:1177–1186
179. Capiati N, Porter R (1975) The concept of one polymer composites modelled with high
density polyethylene. J Mater Sci 10:1671–1677
180. Kmetty A ´ , Ba ´ra ´ny T, Karger-Kocsis J (2010) Self-reinforced polymeric materials: a review.
Prog Polym Sci 35:1288–1310
181. Wang K, Chen F, Zhang Q, Fu Q (2008) Shish–kebab of polyolefin by “melt manipulation”
strategy in injection-molding: a convenience pathway from fundament to application. Polymer 49:4745–4755
182. Gao C, Yu L, Liu H, Chen L (2012) Development of self-reinforced polymer composites.
Prog Polym Sci 37:767–780
183. Pornnimit B, Ehrenstein GW (1991) Extrusion of self-reinforced polyethylene. Adv Polym
Technol 11:91–98
184. Somani RH, Yang L, Zhu L, Hsiao BS (2005) Flow-induced shish–kebab precursor structures
in entangled polymer melts. Polymer 46:8587–8623
185. Cao J, Gao X, Shen K (2012) Morphologies and mechanical properties of high-density
polyethylene induced by the addition of small amounts of both low- and high-molecularweight polyolefin under shear stress applied by dynamic packing injection molding.
J Macromol Sci Part B 51:2519–2526
186. Bo ¨hm LL (2003) The ethylene polymerization with Ziegler catalysts: fifty years after the
discovery. Angew Chem Int Ed 42:5010–5030
187. McKenna TFL, Di Martino A, Weickert G, Soares JBP (2010) Particle growth during the
polymerisation of olefins on supported catalysts, 1 – nascent polymer structures. Macromol
React Eng 4:40–64
188. Ruff M, Paulik C (2013) Controlling polyolefin properties by in-reactor blending: 2. particle
design. Macromol React Eng 7:71–83
189. Ruff M, Paulik C (2012) Controlling polyolefin properties by in-reactor blending, 1–polymerization process, precise kinetics, and molecular properties of UHMW-PE polymers.
Macromol React Eng 6:302–317
190. Chu K-J, Soares JBP, Penlidis A (2000) Variation of molecular weight distribution (MWD)
and short chain branching distribution (SCBD) of ethylene/1-hexene copolymers produced
with different in-situ supported metallocene catalysts. Macromol Chem Phys 201:340–348
191. Kurek A, Mark S, Enders M, Kristen MO, Mu ¨lhaupt R (2010) Mesoporous silica supported
multiple single-site catalysts and polyethylene reactor blends with tailor-made trimodal and
ultra-broad molecular weight distributions. Macromol Rapid Commun 31:1359–1363
308
M. Stu ¨rzel et al.
functionalized graphene/linear low density polyethylene composites by a solution mixing
method. Carbon 49:1033–1037
174. Kim H, Kobayashi S, AbdurRahim MA, Zhang MJ, Khusainova A, Hillmyer MA, Abdala
AA, Macosko CW (2011) Graphene/polyethylene nanocomposites: effect of polyethylene
functionalization and blending methods. Polymer 52:1837–1846
175. Xu J-Z, Chen C, Wang Y, Tang H, Li Z-M, Hsiao BS (2011) Graphene nanosheets and shear
flow induced crystallization in isotactic polypropylene nanocomposites. Macromolecules
44:2808–2818
176. Choi B, Lee J, Lee S, Ko J-H, Lee K-S, Oh J, Han J, Kim Y-H, Choi IS, Park S (2013)
Generation of ultra-high-molecular-weight polyethylene from metallocenes immobilized
onto N-doped graphene nanoplatelets. Macromol Rapid Commun 34(6):533–538.
doi:10.1002/marc.201200768
177. Anselm M (2012) Polyethylen- und Polyoctenamer-Nanokomposite durch Katalytische
Polymerisation in Gegenwart von funktionalisierten Graphenen. PhD thesis, AlbertLudwigs-University of Freiburg
178. Capiati NJ, Porter RS (1975) Tensile properties of ultradrawn polyethylene. J Polym Sci
Polym Phys Ed 13:1177–1186
179. Capiati N, Porter R (1975) The concept of one polymer composites modelled with high
density polyethylene. J Mater Sci 10:1671–1677
180. Kmetty A ´ , Ba ´ra ´ny T, Karger-Kocsis J (2010) Self-reinforced polymeric materials: a review.
Prog Polym Sci 35:1288–1310
181. Wang K, Chen F, Zhang Q, Fu Q (2008) Shish–kebab of polyolefin by “melt manipulation”
strategy in injection-molding: a convenience pathway from fundament to application. Polymer 49:4745–4755
182. Gao C, Yu L, Liu H, Chen L (2012) Development of self-reinforced polymer composites.
Prog Polym Sci 37:767–780
183. Pornnimit B, Ehrenstein GW (1991) Extrusion of self-reinforced polyethylene. Adv Polym
Technol 11:91–98
184. Somani RH, Yang L, Zhu L, Hsiao BS (2005) Flow-induced shish–kebab precursor structures
in entangled polymer melts. Polymer 46:8587–8623
185. Cao J, Gao X, Shen K (2012) Morphologies and mechanical properties of high-density
polyethylene induced by the addition of small amounts of both low- and high-molecularweight polyolefin under shear stress applied by dynamic packing injection molding.
J Macromol Sci Part B 51:2519–2526
186. Bo ¨hm LL (2003) The ethylene polymerization with Ziegler catalysts: fifty years after the
discovery. Angew Chem Int Ed 42:5010–5030
187. McKenna TFL, Di Martino A, Weickert G, Soares JBP (2010) Particle growth during the
polymerisation of olefins on supported catalysts, 1 – nascent polymer structures. Macromol
React Eng 4:40–64
188. Ruff M, Paulik C (2013) Controlling polyolefin properties by in-reactor blending: 2. particle
design. Macromol React Eng 7:71–83
189. Ruff M, Paulik C (2012) Controlling polyolefin properties by in-reactor blending, 1–polymerization process, precise kinetics, and molecular properties of UHMW-PE polymers.
Macromol React Eng 6:302–317
190. Chu K-J, Soares JBP, Penlidis A (2000) Variation of molecular weight distribution (MWD)
and short chain branching distribution (SCBD) of ethylene/1-hexene copolymers produced
with different in-situ supported metallocene catalysts. Macromol Chem Phys 201:340–348
191. Kurek A, Mark S, Enders M, Kristen MO, Mu ¨lhaupt R (2010) Mesoporous silica supported
multiple single-site catalysts and polyethylene reactor blends with tailor-made trimodal and
ultra-broad molecular weight distributions. Macromol Rapid Commun 31:1359–1363
308
M. Stu ¨rzel et al.