JONATHAN I. DAWSON • Bone and Joint Research Group, Centre for Human Development,
Stem Cells and Regeneration, Institute of Developmental Sciences, University of
Southampton, Southampton, UK
LORIS DOMENICALE • Faculty of Engineering and the Environment, Southampton
Innovation Boldrewood Campus, University of Southampton, Southampton, UK
GIUSEPPE FORTE • Department of Materials, Holywell Park, Loughborough University,
Leicestershire, UK
CESARE GARGIOLI • University of Rome “Tor Vergata”, Rome, Italy
SARA MARIA GIANNITELLI • Universita ` Campus Bio-Medico di Roma, Rome, Italy
MICHAEL GLINKA • Bone and Joint Research Group, Centre for Human Development, Stem
Cells and Regeneration, Institute of Developmental Sciences, University of Southampton,
Southampton, UK
DIRK W. GRIJPMA • MIRA Institute for Biomedical Technology and Technical Medicine,
Department of Biomaterials Science and Technology, Faculty of Science and Technology,
University of Twente, Enschede, The Netherlands; Department of Biomedical Engineering,
University Medical Centre Groningen, Groningen, The Netherlands
ELIA A. GUZZI • Macromolecular Engineering Laboratory, Department of Mechanical and
Process Engineering, ETH Zu ¨rich, Zu ¨rich, Switzerland
JULES HARINGS • Aachen-Maastricht Institute for Biobased Materials (AMIBM), Maastricht
University, Brightlands Chemelot Campus, Geleen, The Netherlands
YAN YAN SHERY HUANG • Department of Engineering, University of Cambridge, Cambridge,
UK
YANG-HEE KIM • Bone and Joint Research Group, Centre for Human Development, Stem
Cells and Regeneration, Institute of Developmental Sciences, University of Southampton,
Southampton, UK
XIA LI • Department of Engineering, University of Cambridge, Cambridge, UK
ZHAOYING LI • Department of Engineering, University of Cambridge, Cambridge, UK
KAZIM K. MONCAL • Engineering Science and Mechanics Department, Penn State
University, University Park, PA, USA; The Huck Institutes of the Life Sciences, Penn State
University, University Park, PA, USA
LORENZO MORONI • Department of Complex Tissue Regeneration, MERLN Institute for
Technology Inspired Regenerative Medicine, Maastricht, The Netherlands
CARLOS MOTA • Department of Complex Tissue Regeneration, MERLN Institute for
Technology Inspired Regenerative Medicine, Maastricht, The Netherlands
PAMELA MOZETIC • Universita ` Campus Bio-Medico di Roma, Rome, Italy; Center for
Translational Medicine, International Clinical Research Center, St. Anne’s University
Hospital (FNUSA-ICRC), Brno, Czechia
DEANNA NICDAO • Institute of Health and Biomedical Innovation, Queensland University of
Technology, Brisbane, QLD, Australia
RICHARD O. C. OREFFO • Bone and Joint Research Group, Centre for Human Development,
Stem Cells and Regeneration, Institute of Developmental Sciences, University of
Southampton, Southampton, UK
IBRAHIM T. OZBOLAT • Engineering Science and Mechanics Department, Penn State
University, University Park, PA, USA; The Huck Institutes of the Life Sciences, Penn State
University, University Park, PA, USA; Biomedical Engineering Department, Penn State
University, University Park, PA, USA; Materials Research Institute, Penn State
University, University Park, PA, USA
x
Contributors
Stem Cells and Regeneration, Institute of Developmental Sciences, University of
Southampton, Southampton, UK
LORIS DOMENICALE • Faculty of Engineering and the Environment, Southampton
Innovation Boldrewood Campus, University of Southampton, Southampton, UK
GIUSEPPE FORTE • Department of Materials, Holywell Park, Loughborough University,
Leicestershire, UK
CESARE GARGIOLI • University of Rome “Tor Vergata”, Rome, Italy
SARA MARIA GIANNITELLI • Universita ` Campus Bio-Medico di Roma, Rome, Italy
MICHAEL GLINKA • Bone and Joint Research Group, Centre for Human Development, Stem
Cells and Regeneration, Institute of Developmental Sciences, University of Southampton,
Southampton, UK
DIRK W. GRIJPMA • MIRA Institute for Biomedical Technology and Technical Medicine,
Department of Biomaterials Science and Technology, Faculty of Science and Technology,
University of Twente, Enschede, The Netherlands; Department of Biomedical Engineering,
University Medical Centre Groningen, Groningen, The Netherlands
ELIA A. GUZZI • Macromolecular Engineering Laboratory, Department of Mechanical and
Process Engineering, ETH Zu ¨rich, Zu ¨rich, Switzerland
JULES HARINGS • Aachen-Maastricht Institute for Biobased Materials (AMIBM), Maastricht
University, Brightlands Chemelot Campus, Geleen, The Netherlands
YAN YAN SHERY HUANG • Department of Engineering, University of Cambridge, Cambridge,
UK
YANG-HEE KIM • Bone and Joint Research Group, Centre for Human Development, Stem
Cells and Regeneration, Institute of Developmental Sciences, University of Southampton,
Southampton, UK
XIA LI • Department of Engineering, University of Cambridge, Cambridge, UK
ZHAOYING LI • Department of Engineering, University of Cambridge, Cambridge, UK
KAZIM K. MONCAL • Engineering Science and Mechanics Department, Penn State
University, University Park, PA, USA; The Huck Institutes of the Life Sciences, Penn State
University, University Park, PA, USA
LORENZO MORONI • Department of Complex Tissue Regeneration, MERLN Institute for
Technology Inspired Regenerative Medicine, Maastricht, The Netherlands
CARLOS MOTA • Department of Complex Tissue Regeneration, MERLN Institute for
Technology Inspired Regenerative Medicine, Maastricht, The Netherlands
PAMELA MOZETIC • Universita ` Campus Bio-Medico di Roma, Rome, Italy; Center for
Translational Medicine, International Clinical Research Center, St. Anne’s University
Hospital (FNUSA-ICRC), Brno, Czechia
DEANNA NICDAO • Institute of Health and Biomedical Innovation, Queensland University of
Technology, Brisbane, QLD, Australia
RICHARD O. C. OREFFO • Bone and Joint Research Group, Centre for Human Development,
Stem Cells and Regeneration, Institute of Developmental Sciences, University of
Southampton, Southampton, UK
IBRAHIM T. OZBOLAT • Engineering Science and Mechanics Department, Penn State
University, University Park, PA, USA; The Huck Institutes of the Life Sciences, Penn State
University, University Park, PA, USA; Biomedical Engineering Department, Penn State
University, University Park, PA, USA; Materials Research Institute, Penn State
University, University Park, PA, USA
x
Contributors