680
M. C. Bouleklab et al.
20. Bachmaier M, Kerber D, Setman R (2012) Pippan, The formation of supersaturated solid
solutions in Fe–Cu alloys deformed by high-pressure torsion. Acta Mater 60:860–871. https://
doi.org/10.1016/j.actamat.2011.10.044
21. Faudot F, Gaffet E, Harmelin M (1993) Identification by DSC and DTA of the oxygen and
carbon contamination due to the use of ethanol during mechanical alloying of Cu–Fe powder.
J Mater Sci 28:2669–2676
22. Jiang JZ, Gente C, Bormann R (1998) Mechanical alloying in the Fe–Cu system. Mat Sci Eng
A 242:268–277. https://doi.org/10.1016/S0921-5093(97)00522-4
23. Uenishi K, Kobayashi KF, Nash S (1992) Mechanical alloying in the Fe–Cu system. Z für
Metallkunde 83:132–135
24. Sun J, Wang M, Li X, He Z, Zhao Y (2007) Mechanical alloying influence on the sintering
of Cu–Fe compound powders. Key Eng Mater 353–358:1350–1353. https://doi.org/10.4028/
www.scientific.net/KEM.353-358.1350
25. Lindsley B, Fillari G, Murphy T (2005) Effect of composition and cooling rate on physical properties and microstructure of prealloyed P/M Steels. Advances in Powder Metallurgy
& Particulate Materials, compiled by C. Ruas and T. A. Tomlin, Metal Powder Industries
Federation, Princeton, NJ, part 10, p 10–353
26. Eremina MA, Lomaeva SF, Elsukov EP, Ulyanov AL, Chulkina AA (2013) The Cu–Fe 3 C
nanocomposites mechano-synthesis using liquid hydrocarbon. Chem Steady-state Dev 21:639–
646 (in Russian)
27. Semel FJ (2001) Processes determining the dimensional change of PM Steels, Advances in
Powder Metallurgy & Particulate Materials, compiled by W. G. Eisen and S. Kassam. Metal
Powder Industries Federation, Princeton, NJ part 5:5–113
28. Saji S, Kadokura T, Anada H, Notoya K, Takano N (1998) Solid solubility of carbon in
copper during mechanical alloying. Mater Trans 39:778–781
29. Liu X, Liu Y, Ran X, An J, Cao Z (2007) Fabrication of the supersaturated solid solution of
carbon in copper by mechanical alloying. Mater Charact 58:504–508. https://doi.org/10.1016/
j.matchar.2006.06.022
30. Larionova NS, Nikonova RM, Ladyanov VI (2018) Mechanosynthesis of nanostructured
composites copper-fullerite, copper-graphite. Adv Powder Technol 29:399–406. https://doi.
org/10.1016/j.apt.2017.11.027
31. Boshko O, Dashevskyi M, Mykhaliuk O, Ivanenko K, Hamamda S, Revo S (2016) Structure
and strength of Iron–Copper carbon nanotube nanocomposites. Nanoscale Res Lett 11:78.
https://doi.org/10.1186/s11671-016-1298-8
32. Revo SL, Boshko OI, Dashevskyi MM, Ivanenko KO (2016) Structural relaxation of the Iron–
Copper–Carbon nanotubes materials after mechanochemical activation. Nanosyst Nanomater
Nanotechnol Ukraine 14:169–180
33. Revo SL, Melnichenko MM, Dashevskyi MM, Belyavina NN, Nakonechna OI, Ivanenko
KO, Boshko OI, Avramenko TG (2017) Structure features, strength, and Microhardness of
Nanocomposites obtained from Fe, Cu, and Carbon Nanotubes, O. Fesenko, L. Yatsenko
(eds.), Nanophysics, Nanomaterials, Interface Studies, and Applications, Springer Proceedings
in Physics, 195 (2017). Springer, p 799. https://doi.org/10.1007/978-3-319-56422-7_613
34. Lawcock RL, Davies TJ (1990) Effect of carbon on dimensional and microstructural characteristics of Fe–Cu compacts during sintering. Powder Metall 33:147–150. https://doi.org/10.
1179/pom.1990.33.2.147
35. Shull RD, Cline JP, Baker I, Liu F (1996) Identification of a high-temperature magnetic phase
transition in ball-milled and compacted nanocrystalline Fe–Cu alloys. J Appl Phys 79:6028–
6030
36. Kasperski A (2013) Nanocomposites nanotubes de carbone—céramique à microstructure
contrôlée: préparation et propriétés. Université de Toulouse, Thèse de doctorat
37. Lozovyi F, Ivanenko K, Nedilko S, Revo S, Hamamda S (2016) Thermal analysis of polyethylene + X% carbon nanotubes. Nanoscale Res Lett 11:97. https://doi.org/10.1186/s11671-0161315-y
M. C. Bouleklab et al.
20. Bachmaier M, Kerber D, Setman R (2012) Pippan, The formation of supersaturated solid
solutions in Fe–Cu alloys deformed by high-pressure torsion. Acta Mater 60:860–871. https://
doi.org/10.1016/j.actamat.2011.10.044
21. Faudot F, Gaffet E, Harmelin M (1993) Identification by DSC and DTA of the oxygen and
carbon contamination due to the use of ethanol during mechanical alloying of Cu–Fe powder.
J Mater Sci 28:2669–2676
22. Jiang JZ, Gente C, Bormann R (1998) Mechanical alloying in the Fe–Cu system. Mat Sci Eng
A 242:268–277. https://doi.org/10.1016/S0921-5093(97)00522-4
23. Uenishi K, Kobayashi KF, Nash S (1992) Mechanical alloying in the Fe–Cu system. Z für
Metallkunde 83:132–135
24. Sun J, Wang M, Li X, He Z, Zhao Y (2007) Mechanical alloying influence on the sintering
of Cu–Fe compound powders. Key Eng Mater 353–358:1350–1353. https://doi.org/10.4028/
www.scientific.net/KEM.353-358.1350
25. Lindsley B, Fillari G, Murphy T (2005) Effect of composition and cooling rate on physical properties and microstructure of prealloyed P/M Steels. Advances in Powder Metallurgy
& Particulate Materials, compiled by C. Ruas and T. A. Tomlin, Metal Powder Industries
Federation, Princeton, NJ, part 10, p 10–353
26. Eremina MA, Lomaeva SF, Elsukov EP, Ulyanov AL, Chulkina AA (2013) The Cu–Fe 3 C
nanocomposites mechano-synthesis using liquid hydrocarbon. Chem Steady-state Dev 21:639–
646 (in Russian)
27. Semel FJ (2001) Processes determining the dimensional change of PM Steels, Advances in
Powder Metallurgy & Particulate Materials, compiled by W. G. Eisen and S. Kassam. Metal
Powder Industries Federation, Princeton, NJ part 5:5–113
28. Saji S, Kadokura T, Anada H, Notoya K, Takano N (1998) Solid solubility of carbon in
copper during mechanical alloying. Mater Trans 39:778–781
29. Liu X, Liu Y, Ran X, An J, Cao Z (2007) Fabrication of the supersaturated solid solution of
carbon in copper by mechanical alloying. Mater Charact 58:504–508. https://doi.org/10.1016/
j.matchar.2006.06.022
30. Larionova NS, Nikonova RM, Ladyanov VI (2018) Mechanosynthesis of nanostructured
composites copper-fullerite, copper-graphite. Adv Powder Technol 29:399–406. https://doi.
org/10.1016/j.apt.2017.11.027
31. Boshko O, Dashevskyi M, Mykhaliuk O, Ivanenko K, Hamamda S, Revo S (2016) Structure
and strength of Iron–Copper carbon nanotube nanocomposites. Nanoscale Res Lett 11:78.
https://doi.org/10.1186/s11671-016-1298-8
32. Revo SL, Boshko OI, Dashevskyi MM, Ivanenko KO (2016) Structural relaxation of the Iron–
Copper–Carbon nanotubes materials after mechanochemical activation. Nanosyst Nanomater
Nanotechnol Ukraine 14:169–180
33. Revo SL, Melnichenko MM, Dashevskyi MM, Belyavina NN, Nakonechna OI, Ivanenko
KO, Boshko OI, Avramenko TG (2017) Structure features, strength, and Microhardness of
Nanocomposites obtained from Fe, Cu, and Carbon Nanotubes, O. Fesenko, L. Yatsenko
(eds.), Nanophysics, Nanomaterials, Interface Studies, and Applications, Springer Proceedings
in Physics, 195 (2017). Springer, p 799. https://doi.org/10.1007/978-3-319-56422-7_613
34. Lawcock RL, Davies TJ (1990) Effect of carbon on dimensional and microstructural characteristics of Fe–Cu compacts during sintering. Powder Metall 33:147–150. https://doi.org/10.
1179/pom.1990.33.2.147
35. Shull RD, Cline JP, Baker I, Liu F (1996) Identification of a high-temperature magnetic phase
transition in ball-milled and compacted nanocrystalline Fe–Cu alloys. J Appl Phys 79:6028–
6030
36. Kasperski A (2013) Nanocomposites nanotubes de carbone—céramique à microstructure
contrôlée: préparation et propriétés. Université de Toulouse, Thèse de doctorat
37. Lozovyi F, Ivanenko K, Nedilko S, Revo S, Hamamda S (2016) Thermal analysis of polyethylene + X% carbon nanotubes. Nanoscale Res Lett 11:97. https://doi.org/10.1186/s11671-0161315-y