24
C. J. Thomas Renald et al.
Pitot position at
Merge point
Planar jets
Fig. 2 Jet configuration and pitot tube alignment in the experimental setup
3 Experimental Set-up
The average exploratory set-up is appeared in Fig. 1. Figure 2 demonstrates the
design of four planar flies on the fly plate.
Air from the blower is released into the pipe utilizing an enlarger since the crosssectional region of conduit is greater than the blowers outlet pipe. The channel is
furnished with a rib which can suit a wide assortment of stream plates. By utilizing
PVC pipe, a comparative stream example of air inside the pipe can be guaranteed.
4 Methodology
At the point when the weight in the blower achieves the ideal esteem, the ball valve is
opened. A weight of about 1.5 bar is kept up at the bay. Readings at various positions
were taken by navigating the pitot tube in the guide ways. Relating manometric
readings were taken from the mercury manometer. The readings were organized for
various X/D proportions.
C. J. Thomas Renald et al.
Pitot position at
Merge point
Planar jets
Fig. 2 Jet configuration and pitot tube alignment in the experimental setup
3 Experimental Set-up
The average exploratory set-up is appeared in Fig. 1. Figure 2 demonstrates the
design of four planar flies on the fly plate.
Air from the blower is released into the pipe utilizing an enlarger since the crosssectional region of conduit is greater than the blowers outlet pipe. The channel is
furnished with a rib which can suit a wide assortment of stream plates. By utilizing
PVC pipe, a comparative stream example of air inside the pipe can be guaranteed.
4 Methodology
At the point when the weight in the blower achieves the ideal esteem, the ball valve is
opened. A weight of about 1.5 bar is kept up at the bay. Readings at various positions
were taken by navigating the pitot tube in the guide ways. Relating manometric
readings were taken from the mercury manometer. The readings were organized for
various X/D proportions.