Development of DLP-Based Stereolithography System . . . . . . . . . . . . . . 199
Baban Suryatal, Suhas Deshmukh, and Sunil Sarawade
Experimental Investigation on Geometric Accuracy and Surface
Roughness of Formed Part in Multistage Single Point Incremental
Forming (SPIF) Process . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 209
Sunandkumar Gajjar, Vikas Sisodia, Rahul Jagtap, Kiran More,
and Shailendra Kumar
Wear Behavior of Duplex Stainless Steels Sintered and Forged Under
Partial Vacuum Atmosphere . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 223
C. Rajkumar, J. Udaya Prakash, C. Sarala Rubi, and R. Mariappan
Static Analysis of a C-Channel Robot Gripper Arm Using Finite
Element Analysis . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 231
D. Sakthimurugan, L. Antony Michael Raj, V. Antony Aroul Raj,
R. Balaji, K. Thavasilingam, and N. Bharath
TLBO and JAYA: Insights into Novel Multi-objective
Optimization Techniques . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 239
V. Rajashekar and Yeole Shivraj Narayan
Study of Vehicle Pulling Phenomenon and Various Factors
that Influence Vehicle Pull . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 247
Kale Shubham, Patil Pramod, Sharma Ankur, Tawade Prasad,
and Bhalekar Sahil
Design and Analyzing Vibration with Acoustic—Structural Coupling
of Muffler for Four-Stroke Diesel Engine . . . . . . . . . . . . . . . . . . . . . . . . 255
T. Sreedhar and B. Nageswara Rao
Review of Polydimethylsiloxane (PDMS) as a Material
for Additive Manufacturing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 265
Qusai Alkhalaf, Sarang Pande, and Ritesh Ramesh Palkar
A State-of-the-Art Review on 3D Printed Orthotic Devices for Flat
Feet Condition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 277
S. Koteswari and Yeole Shivraj Narayan
Synthesis and Characterization of 17 Cr Ferritic ODS Steel Developed
Through Vacuum Hot Pressing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 285
G. Dharmalingam, Sellamuthu Prabhukumar, and M. Arun Prasad
Investigation on Mechanical Properties of AA6082-AA7075 Friction
Stir Welded Dissimilar Aluminum Alloys . . . . . . . . . . . . . . . . . . . . . . . . 295
K. Giridharan, G. Chakravarthi, S. Karthick, S. MuthuKumaran,
S. Padmanaban, and M. Kabeerr
Contents
ix
Baban Suryatal, Suhas Deshmukh, and Sunil Sarawade
Experimental Investigation on Geometric Accuracy and Surface
Roughness of Formed Part in Multistage Single Point Incremental
Forming (SPIF) Process . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 209
Sunandkumar Gajjar, Vikas Sisodia, Rahul Jagtap, Kiran More,
and Shailendra Kumar
Wear Behavior of Duplex Stainless Steels Sintered and Forged Under
Partial Vacuum Atmosphere . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 223
C. Rajkumar, J. Udaya Prakash, C. Sarala Rubi, and R. Mariappan
Static Analysis of a C-Channel Robot Gripper Arm Using Finite
Element Analysis . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 231
D. Sakthimurugan, L. Antony Michael Raj, V. Antony Aroul Raj,
R. Balaji, K. Thavasilingam, and N. Bharath
TLBO and JAYA: Insights into Novel Multi-objective
Optimization Techniques . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 239
V. Rajashekar and Yeole Shivraj Narayan
Study of Vehicle Pulling Phenomenon and Various Factors
that Influence Vehicle Pull . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 247
Kale Shubham, Patil Pramod, Sharma Ankur, Tawade Prasad,
and Bhalekar Sahil
Design and Analyzing Vibration with Acoustic—Structural Coupling
of Muffler for Four-Stroke Diesel Engine . . . . . . . . . . . . . . . . . . . . . . . . 255
T. Sreedhar and B. Nageswara Rao
Review of Polydimethylsiloxane (PDMS) as a Material
for Additive Manufacturing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 265
Qusai Alkhalaf, Sarang Pande, and Ritesh Ramesh Palkar
A State-of-the-Art Review on 3D Printed Orthotic Devices for Flat
Feet Condition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 277
S. Koteswari and Yeole Shivraj Narayan
Synthesis and Characterization of 17 Cr Ferritic ODS Steel Developed
Through Vacuum Hot Pressing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 285
G. Dharmalingam, Sellamuthu Prabhukumar, and M. Arun Prasad
Investigation on Mechanical Properties of AA6082-AA7075 Friction
Stir Welded Dissimilar Aluminum Alloys . . . . . . . . . . . . . . . . . . . . . . . . 295
K. Giridharan, G. Chakravarthi, S. Karthick, S. MuthuKumaran,
S. Padmanaban, and M. Kabeerr
Contents
ix