288
Water for Energy and Fuel Production
57. Peter, K. and Eckhard, D., “An assessment of supercritical water oxidation (SCWO):
Existing problems, possible solutions and new reactor concepts,” Chemical Engineering
Journal, 83, 207–214 (2001).
58. Li, R., Savage, P., and Szmukler, D., “2-Chlorophenol oxidation in supercritical water:
Global kinetics and reaction products,” AIChE Journal, 39 (1), 178–187 (1993).
59. Thomason, T., Hong, G., Swallow, K., and Killilea, W., “The MODAR supercritical
water oxidation process,” in Freeman, H. (ed.), Innovative Hazardous Waste Treatments
Technology Series. Technomic Publishing Co., Lancaster, PA (1990).
60. Wantanabe, M., Sato, T., Inomata, H., Smith, R., Arai, K., Kruse, A., and Dinjus, E.,
“Chemical reactions of C1 compounds in near critical and supercritical water,” Chemical
Reviews, 104, 5803–5821 (2004).
61. Watanabe, M., Hirakoso, H., Sawamoto, S., Adschiri, T., and Arai, K., The Journal of
Supercritical Fluids, 13, 247–252 (1998).
62. Stiles, A., Catalyst Manufacture. Marcel Dekker, New York (1983).
63. Attia, Y., Sol-Gel Processing and Applications. Plenum Press, New York (1994).
64. Messing, G., Zhang, S., and Yayanthi, G., “Ceramic powder synthesis by spray pyrolysis,” Journal of the American Ceramic Society, 76, 2707 (1993).
65. Moser, W., “Hydrocarbon partial oxidation catalysts prepared by the high temperature aerosol decomposition process: Crystal and catalytic chemistry,” in Oyama, T.
and Hightower, J. (eds.), Catalytic Selective Oxidation. American Chemical Society,
Washington, DC, 244 (1993).
66. Nanjangud, S., Brezny, R., and Green, D., “Strength and Young’s modulus behavior of
a partially sintered porous alumina,” Journal of the American Ceramic Society, 78, 266
(1995).
67. Pugh, R. and Bergstrom, L. (eds.), Surface and Colloid Chemistry in Advanced Ceramic
Processing. Marcel Dekker, New York (1994).
68. Saggio-Woyansky, J., Scott, C., and Minnear, W., “Processing of porous ceramics,”
American Ceramic Society Bulletin, 72, 1674 (1992).
69. Segal, D., Chemical Synthesis of Advanced Ceramic Materials. Cambridge University
Press, New York (1983).
70. Vincenzini, P., Ceramic Powders: Preparation, Consolidation and Sintering. Elsevier
Scientific Publishing Co., New York (1993).
71. Ward, D. and Ko, E., “Preparing catalyst materials by sol-gel method,” Industrial &
Engineering Chemistry Research, 34, 421 (1995).
72. Wold, A. and Dwight, K., Solid State Chemistry, Synthesis, Structure, and Properties of
Selected Oxides and Sulfides. Chapman & Hill, New York (1993).
73. Deshpande, G., Holder, G., Bishop, A., Gopal, J., and Wender, I., Fuel, 63, 956 (1984).
74. Pauliatis, M., Penninger, R., Gray, D., and Davidson, P. (eds.), Chemical
Engineering at Supercritical Fluid Conditions. Ann Arbor Science Publishers, Ann
Arbor, MI, 385–407 (1983).
75. Modell, M., Reid, R., and Amin, S., “Gasification process,” US Patent No. 4113446
(September 12, 1978).
76. Jezko, J., Gray, D., and Kershaw, J., Fuel Processing Technology, 5, 229 (1982).
77. Vasilakos, N., Dobbs, J., and Parasi, A., American Chemical Society Division of Fuel
Chemistry, preprints, 28 (4), 212 (1983).
78. Kershaw, J. and Bagnell, L., “Extraction of Australian coals with supercritical water,”
ACS Reprints, 101–111 (1988).
79. Minowa, T., Zhen, F., and Ogi, T., “Cellulose decomposition in hot-compressed water
with alkali or nickel catalyst,” The Journal of Supercritical Fluids, 13, 253–259 (1998).
80. Sasaki, M., Kabyemela, B., Malaluan, R., Hirose, S., Takeda, N., Adschiri, T., and
Arai, K., “Cellulose hydrolysis in sub-critical and super-critical water,” The Journal of
Supercritical Fluids, 13, 261–268 (1998).