6 Tool Model Building and Research on Cutting Simulation …
73
Table 6.4 Experimental platform
Tool type
Diameter: 6 mm, 4
edge, a front angle of
30°, a back angle of
14°and a helix angle of
45, surface coating:
TiSiN carbide milling
cutter
Equipment
Performance
parameter
Spindle speed (r/min) 4000, 8000, 12,000,
16,000
Machining center
Spindle:20000 rpm,
Stroke: 900 × 700 ×
400 mm
Dynamometer
Fx, Fy, Fz:-250 ~
250 N
Feed rate (mm/min)
200, 400, 600, 800
Temperature
measuring instrument
50–3000 °C
Cutting depth (μm)
20, 40, 60, 80
Scanning electron
microscope
Maximum
magnification:
50,000 times
Fig. 6.13 Comparison of simulation and experimental chip forming data and drawing of cutting
force and temperature
73
Table 6.4 Experimental platform
Tool type
Diameter: 6 mm, 4
edge, a front angle of
30°, a back angle of
14°and a helix angle of
45, surface coating:
TiSiN carbide milling
cutter
Equipment
Performance
parameter
Spindle speed (r/min) 4000, 8000, 12,000,
16,000
Machining center
Spindle:20000 rpm,
Stroke: 900 × 700 ×
400 mm
Dynamometer
Fx, Fy, Fz:-250 ~
250 N
Feed rate (mm/min)
200, 400, 600, 800
Temperature
measuring instrument
50–3000 °C
Cutting depth (μm)
20, 40, 60, 80
Scanning electron
microscope
Maximum
magnification:
50,000 times
Fig. 6.13 Comparison of simulation and experimental chip forming data and drawing of cutting
force and temperature