18 The Effect of Surface Ultrasonic Rolling Processing …
239
15. Liu, Y., Wang, L., Wang, D., Wang, Y.: Mechanical properties of 40Cr surface layer after
ultrasonic surface rolling processing. J. Tianjin Univ. (Science and Technology) 7, 656–661
(2012)
16. Liu, C., Liu, D., Zhang, X., He, G., Xu, X., Ao, N., Ma, A., Liu, D.: On the influence of
ultrasonic surface rolling process on surface integrity and fatigue performance of Ti-6Al-4 V
alloy. Surf. Coat. Technol. 370, 24–34 (2019)
17. Ren, X.C., Chen, L.Q., Liu, X.G., Xiang, B., Lin, G.B.: The effect of surface ultrasonic rolling
treatment on fatigue properties of high-speed train axle steels. J. Mater. Eng. 43(12), 1–5 (2015).
(in Chinese)
18. Wang, T., Wang, D., Shen, Y., Gong, B., Deng, C.: Effect of ultrasonic surface rolling processing
parameters on 40Cr surface roughness. J. Tianjin Univ. (Science and Technology) 42(2), 168–
172 (2009)
19. Xu, S.K.: Study on the surface grain refinement of bearing ring ultrasonic rolling processing.
Henan University of Science and Technology (2019)
20. Li, F.Q., Zhao, B.: Effect of ultrasonic machining rolling force on surface characteristics of
titanium alloy. Surf. Technol. 10, 34–40 (2019). (in Chinese)
21. Liu, S.Z.: The effect of ultrasonic rolling on the surface properties of GCr15 material. Nanchang
University. pp. 56 (2019)
22. Mangonon, P.L., Thomas, G.: Martensite phases in 340 stainless steel. Metallurg. Mater. Trans.
B. 1(6), 1577–1586 (1970)
23. Cao, L., et al.: Preparation of ultrafine cemented carbide WC-Co powder. J. Chin. Ceram. Soc.
05, 123–127 (1996)
24. Ma, K., Wen, H., Hu, T., Topping, T., Isheim, D., Seidman, D.N., Lavernia, E.J., Schoenung,
J.M.: Mechanical behavior and strengthening mechanisms in ultrafine grain precipitationstrengthened aluminum alloy. Acta Mater. 62, 141–155 (2014)
25. Gong, S.X., Meguid, S.A.: On the effect of the release of residual stresses due to near-tip
microcracking. Int. J. Fract. 52, 257–274 (1991)
26. Hassani-Gangaraj, S.M., Moridi, A., Guagliano, M., Ghidini, A.: Nitriding duration reduction
without sacrificing mechanical characteristics and fatigue behavior: The beneficial effect of
surface nano-crystallization by prior severe shot peening. Mater. Des. 55, 492–498 (2014)
27. Roland, T., Retraint, D., Lu., K., Lu, J.: Fatigue life improvement through surface nanostructuring of stainless steel by means of surface mechanical attrition treatment. Scripta Materialia
54(11), 1949–1954 (2006)
28. Kubiak, K., Fouvry, S., Marechal, A.M., Vernet, J.M.: Behaviour of shot peening combined with
WC–Co HVOF coating under complex fretting wear and fretting fatigue loading conditions.
Surf. Coat. Technol. 201(7), 4323–4328 (2006)
29. Liu, K.G., Yan, C.: The influence of structural fatigue test life data distribution type on its
service life. J. Jilin Univ. (Engineering Science Edition) 41(02), 419–423 (2011)
30. Lee, C.S., Cho, I.S., Pyoun, Y.S., Park, I.G.: Study of inner micro cracks on rolling contact
fatigue of bearing steels using ultrasonic nano-crystalline surface modification. Key Eng. Mater.
462–463, 979–984 (2011)
31. Zhang, X.C., Xu, B.S., Xuan, F.Z., Wang, Z.D., Tu, S.T.: Failure mode and fatigue mechanism
of laser-remelted plasma-sprayed Ni alloy coatings in rolling contact. Surf. Coat. Technol.
205(10), 3119–3127 (2011)
32. Wang, J.W., Li, G.L., Wang, H.D., Xu, B.S., Kang, J.J.: Rolling contact fatigue failure
mechanism of nitrocarburizing 45 steel. Trans. Mater. Heat Treatm. 10, 124–129 (2012)
33. Qin, H.D., Zhang, Y.L., Liu, H.P., Qu, S.G., Lai, F.Q.: The effect of shot peening on the rolling
contact fatigue properties of 25CrNi2MoV steel. Surf. Technol. 49(5), 222–229 + 236 (2020)
34. Zhang, Y.L., Lai, F.Q., Qu, S.G., Liu, H.P., Jia, D.S., Du, S.F.: Effect of ultrasonic surface
rolling on microstructure and rolling contact fatigue behavior of 17Cr2Ni2MoVNb steel. Surf.
Coat. Technol. 366, 321–330 (2019)
35. Zhang, M., Liu, Z., Deng, J., Yang, M., Zhang, T.: Optimum design of compressive residual
stress field caused by ultrasonic surface rolling with a mathematical model. Appl. Math. Model.
76, 800–831 (2019)
239
15. Liu, Y., Wang, L., Wang, D., Wang, Y.: Mechanical properties of 40Cr surface layer after
ultrasonic surface rolling processing. J. Tianjin Univ. (Science and Technology) 7, 656–661
(2012)
16. Liu, C., Liu, D., Zhang, X., He, G., Xu, X., Ao, N., Ma, A., Liu, D.: On the influence of
ultrasonic surface rolling process on surface integrity and fatigue performance of Ti-6Al-4 V
alloy. Surf. Coat. Technol. 370, 24–34 (2019)
17. Ren, X.C., Chen, L.Q., Liu, X.G., Xiang, B., Lin, G.B.: The effect of surface ultrasonic rolling
treatment on fatigue properties of high-speed train axle steels. J. Mater. Eng. 43(12), 1–5 (2015).
(in Chinese)
18. Wang, T., Wang, D., Shen, Y., Gong, B., Deng, C.: Effect of ultrasonic surface rolling processing
parameters on 40Cr surface roughness. J. Tianjin Univ. (Science and Technology) 42(2), 168–
172 (2009)
19. Xu, S.K.: Study on the surface grain refinement of bearing ring ultrasonic rolling processing.
Henan University of Science and Technology (2019)
20. Li, F.Q., Zhao, B.: Effect of ultrasonic machining rolling force on surface characteristics of
titanium alloy. Surf. Technol. 10, 34–40 (2019). (in Chinese)
21. Liu, S.Z.: The effect of ultrasonic rolling on the surface properties of GCr15 material. Nanchang
University. pp. 56 (2019)
22. Mangonon, P.L., Thomas, G.: Martensite phases in 340 stainless steel. Metallurg. Mater. Trans.
B. 1(6), 1577–1586 (1970)
23. Cao, L., et al.: Preparation of ultrafine cemented carbide WC-Co powder. J. Chin. Ceram. Soc.
05, 123–127 (1996)
24. Ma, K., Wen, H., Hu, T., Topping, T., Isheim, D., Seidman, D.N., Lavernia, E.J., Schoenung,
J.M.: Mechanical behavior and strengthening mechanisms in ultrafine grain precipitationstrengthened aluminum alloy. Acta Mater. 62, 141–155 (2014)
25. Gong, S.X., Meguid, S.A.: On the effect of the release of residual stresses due to near-tip
microcracking. Int. J. Fract. 52, 257–274 (1991)
26. Hassani-Gangaraj, S.M., Moridi, A., Guagliano, M., Ghidini, A.: Nitriding duration reduction
without sacrificing mechanical characteristics and fatigue behavior: The beneficial effect of
surface nano-crystallization by prior severe shot peening. Mater. Des. 55, 492–498 (2014)
27. Roland, T., Retraint, D., Lu., K., Lu, J.: Fatigue life improvement through surface nanostructuring of stainless steel by means of surface mechanical attrition treatment. Scripta Materialia
54(11), 1949–1954 (2006)
28. Kubiak, K., Fouvry, S., Marechal, A.M., Vernet, J.M.: Behaviour of shot peening combined with
WC–Co HVOF coating under complex fretting wear and fretting fatigue loading conditions.
Surf. Coat. Technol. 201(7), 4323–4328 (2006)
29. Liu, K.G., Yan, C.: The influence of structural fatigue test life data distribution type on its
service life. J. Jilin Univ. (Engineering Science Edition) 41(02), 419–423 (2011)
30. Lee, C.S., Cho, I.S., Pyoun, Y.S., Park, I.G.: Study of inner micro cracks on rolling contact
fatigue of bearing steels using ultrasonic nano-crystalline surface modification. Key Eng. Mater.
462–463, 979–984 (2011)
31. Zhang, X.C., Xu, B.S., Xuan, F.Z., Wang, Z.D., Tu, S.T.: Failure mode and fatigue mechanism
of laser-remelted plasma-sprayed Ni alloy coatings in rolling contact. Surf. Coat. Technol.
205(10), 3119–3127 (2011)
32. Wang, J.W., Li, G.L., Wang, H.D., Xu, B.S., Kang, J.J.: Rolling contact fatigue failure
mechanism of nitrocarburizing 45 steel. Trans. Mater. Heat Treatm. 10, 124–129 (2012)
33. Qin, H.D., Zhang, Y.L., Liu, H.P., Qu, S.G., Lai, F.Q.: The effect of shot peening on the rolling
contact fatigue properties of 25CrNi2MoV steel. Surf. Technol. 49(5), 222–229 + 236 (2020)
34. Zhang, Y.L., Lai, F.Q., Qu, S.G., Liu, H.P., Jia, D.S., Du, S.F.: Effect of ultrasonic surface
rolling on microstructure and rolling contact fatigue behavior of 17Cr2Ni2MoVNb steel. Surf.
Coat. Technol. 366, 321–330 (2019)
35. Zhang, M., Liu, Z., Deng, J., Yang, M., Zhang, T.: Optimum design of compressive residual
stress field caused by ultrasonic surface rolling with a mathematical model. Appl. Math. Model.
76, 800–831 (2019)