15 Simulation of Multi-step Tube Hot Gas Forming Process …
195
2. Neugebauer, R., Schieck, F., Werner, M.: Tube press hardening for lightweight design. In:
ASME 2011 International Manufacturing Science and Engineering Conference, pp. 495–502.
MSEC, Cornvallis, Oregon (2011).
3. Mori, K., Maki, S., Tanaka, Y.: Warm and hot stamping of ultra high tensile strength steel
sheets using resistance heating. CIRP Ann. 54(1), 209–212 (2005)
4. Merklein, M., Wieland, M., Lechner, M., Bruschi, S., Ghiotti, A.: Hot stamping of boron steel
sheets with tailored properties: a review. J. Mater. Process. Technol. 228, 11–24 (2016)
5. Karbasian, H., Tekkaya, A.E.: A review on hot stamping. J. Mater. Process. Technol. 210(15),
2103–2118 (2010)
6. Vadillo, L., Santos, M., Gutierrez, M., Pérez, I., Gonzalez, B., Uthaisangsuk, V.: Simulation
and experimental results of the hot metal gas forming technology for high strength steel and
stainless steel tubes forming. AIP Conf. Proc. 908(1), 1199–1204 (2007)
7. Drossel, W., Pierschel, N., Paul, A., Katzfuß, K., Demuth, R.: Determination of the active
medium temperature in media based press hardening processes. J. Manuf. Sci. Eng. 136(2),
021013 (2014)
8. Paul, A., Strano, M.: The influence of process variables on the gas forming and press hardening
of steel tubes. J. Mater. Process. Technol. 228, 160–169 (2016)
9. Paul, A., Reuther, F., Neumann, S., Albert, A., Landgrebe, D.: Process simulation and experimental validation of Hot Metal Gas Forming with new press hardening steels. In: 36th IDDRG
Conference - Materials Modelling and Testing for Sheet Metal Forming, Vol. 896, pp. 012051.
IOP Publishing Ltd, Munich, Germany (2017).
10. Yi, H.K., Pavlina, E.J., Tyne, C.J.V., Moon, Y.H.: Application of a combined heating system
for the warm hydroforming of lightweight alloy tubes. J. Mater. Process. Technol. 203(1–3),
532–536 (2008)
11. Maeno, T., Mori, K., Fujimoto, K.: Development of the hot gas bulging process for aluminium
alloy tube using resistance heating. Key Eng. Mater. 410–411, 315–323 (2009)
12. Maeno, T., Mori, K., Adachi, K.: Gas forming of ultra-high strength steel hollow part using
air filled into sealed tube and resistance heating. J. Mater. Process. Technol. 214(1), 97–105
(2014)
13. Maeno, T., Mori, K., Fujimoto, K.: Hot gas bulging of sealed aluminium alloy tube using
resistance heating. Manufacturing Review 1, 5 (2014)
14. Zhang, W., Han, C., Yuan, S.: Hot forming processing simulation of torsion beam of high
strength steel 22MnB5. Mater. Sci. Technol. 22, 16–22 (2014). (in Chineses)
15. Åkerström, P., Oldenburg, M.: Austenite decomposition during press hardening of a boron
steel—Computer simulation and test. J. Mater. Process. Technol. 174(1–3), 399–406 (2006)
16. Merklein, M., Lechler, J.: Determination of material and process characteristics for hot
stamping processes of quenchenable ultra high strength steels with respect to a FE-based
process design. SAE Int. J. Mater. Manuf. 1(1), 411–426 (2008)
17. Arthur, S.: inite element modeling of hot stamping. Steel Res. Int. 80(9), 658–664 (2009)
18. Shapiro, A.B.: Using LS-Dyna for hot stamping. In: 7th European LS-DYNA Users Conference,
Salzburg, Austria (2009).
195
2. Neugebauer, R., Schieck, F., Werner, M.: Tube press hardening for lightweight design. In:
ASME 2011 International Manufacturing Science and Engineering Conference, pp. 495–502.
MSEC, Cornvallis, Oregon (2011).
3. Mori, K., Maki, S., Tanaka, Y.: Warm and hot stamping of ultra high tensile strength steel
sheets using resistance heating. CIRP Ann. 54(1), 209–212 (2005)
4. Merklein, M., Wieland, M., Lechner, M., Bruschi, S., Ghiotti, A.: Hot stamping of boron steel
sheets with tailored properties: a review. J. Mater. Process. Technol. 228, 11–24 (2016)
5. Karbasian, H., Tekkaya, A.E.: A review on hot stamping. J. Mater. Process. Technol. 210(15),
2103–2118 (2010)
6. Vadillo, L., Santos, M., Gutierrez, M., Pérez, I., Gonzalez, B., Uthaisangsuk, V.: Simulation
and experimental results of the hot metal gas forming technology for high strength steel and
stainless steel tubes forming. AIP Conf. Proc. 908(1), 1199–1204 (2007)
7. Drossel, W., Pierschel, N., Paul, A., Katzfuß, K., Demuth, R.: Determination of the active
medium temperature in media based press hardening processes. J. Manuf. Sci. Eng. 136(2),
021013 (2014)
8. Paul, A., Strano, M.: The influence of process variables on the gas forming and press hardening
of steel tubes. J. Mater. Process. Technol. 228, 160–169 (2016)
9. Paul, A., Reuther, F., Neumann, S., Albert, A., Landgrebe, D.: Process simulation and experimental validation of Hot Metal Gas Forming with new press hardening steels. In: 36th IDDRG
Conference - Materials Modelling and Testing for Sheet Metal Forming, Vol. 896, pp. 012051.
IOP Publishing Ltd, Munich, Germany (2017).
10. Yi, H.K., Pavlina, E.J., Tyne, C.J.V., Moon, Y.H.: Application of a combined heating system
for the warm hydroforming of lightweight alloy tubes. J. Mater. Process. Technol. 203(1–3),
532–536 (2008)
11. Maeno, T., Mori, K., Fujimoto, K.: Development of the hot gas bulging process for aluminium
alloy tube using resistance heating. Key Eng. Mater. 410–411, 315–323 (2009)
12. Maeno, T., Mori, K., Adachi, K.: Gas forming of ultra-high strength steel hollow part using
air filled into sealed tube and resistance heating. J. Mater. Process. Technol. 214(1), 97–105
(2014)
13. Maeno, T., Mori, K., Fujimoto, K.: Hot gas bulging of sealed aluminium alloy tube using
resistance heating. Manufacturing Review 1, 5 (2014)
14. Zhang, W., Han, C., Yuan, S.: Hot forming processing simulation of torsion beam of high
strength steel 22MnB5. Mater. Sci. Technol. 22, 16–22 (2014). (in Chineses)
15. Åkerström, P., Oldenburg, M.: Austenite decomposition during press hardening of a boron
steel—Computer simulation and test. J. Mater. Process. Technol. 174(1–3), 399–406 (2006)
16. Merklein, M., Lechler, J.: Determination of material and process characteristics for hot
stamping processes of quenchenable ultra high strength steels with respect to a FE-based
process design. SAE Int. J. Mater. Manuf. 1(1), 411–426 (2008)
17. Arthur, S.: inite element modeling of hot stamping. Steel Res. Int. 80(9), 658–664 (2009)
18. Shapiro, A.B.: Using LS-Dyna for hot stamping. In: 7th European LS-DYNA Users Conference,
Salzburg, Austria (2009).