514
F. Bordry et al.
236. G.Apollinari et al., “High-Luminosity Large Hadron Collider (HL-LHC): Technical Design
Report V. 0.1.” CERN Yellow Reports: Monographs. CERN-2017-007-M, Geneva: CERN,
2017.
237. G. Valentino et al., “Final implementation, commissioning, and performance of embedded
collimator beam position monitors in the Large Hadron Collider,” Phys. Rev. Accel. Beams
20 (2017) no.8, 081002
238. R. Bruce, A. Marsili, S. Redaelli, “Cleaning Performance with 11T Dipoles and Local Dispersion Suppressor Collimation at the LHC,” Proceedings, 5th International Particle Accelerator
Conference (IPAC 2014): Dresden, Germany, June 15-20, 2014. DOI: 10.18429/JACoWIPAC2014-MOPRO042
239. D. Mirarchi et al., “Cleaning Performance of the Collimation System of the High
Luminosity Large Hadron Collider,” Proceedings, 7th International Particle Accelerator
Conference (IPAC 2016): Busan, Korea, May 8-13, 2016, doi 10.18429/JACoW-IPAC2016WEPMW007.
240. C. Omet, H. Kollmus, H. Reich-Sprenger, P.J. Spiller, “Ion Catcher System for the Stabilisation of the Dynamic Pressure in SIS18”. EPAC08-MOPC099. Jun 23, 2008.
241. R. Assmann et al, “The final collimation system for the LHC”. EPAC06. LHC-Project-Report919.
242. D. Wollmann et al., “Beam feasibility study of a collimator with in-jaw beam position
monitors,” Nucl.Instrum.Meth. A768 (2014) 62-68
243. The FCC collaboration (Abada, A. and others), “HE-LHC: The High-Energy Large Hadron
Collider,” Eur.Phys.J.ST 228 (2019) no.5, 1109-1382
244. The FCC collaboration (Abada, A. and others), “FCC-hh: The Hadron Collider: Future
Circular Collider Conceptual Design Report Volume 3,” Eur.Phys.J.ST 228 (2019) no.4, 7551107
245. N.V. Mokhov, P.C. Czarapata, A.I. Drozhdin, D.A. Still, R.V. Samulyak. “Beam-induced
damage to the Tevatron components and what has been done about it”. FERMILAB-CONF06-415-AD, FERMILAB-APC, Nov 2006. Presented at HB2006, Tsukuba, Japan, 29 May -
2 Jun 2006.
246. R. Bruce, R. Assmann, S. Redaelli, “Calculations of safe collimator settings and β ∗ at the
CERN Large Hadron Collider,” Phys.Rev.ST Accel.Beams 18 (2015) no.6, 061001
247. R. Bruce et al., “Reaching record-low β ∗ β ∗ at the CERN Large Hadron Collider using a novel
scheme of collimator settings and optics,” Nucl.Instrum.Meth. A848 (2017) 19-30
248. A.Bertarelli et al, “The Mechanical Design for the LHC Collimators”. EPAC04. LHC-ProjectReport-786.
249. A. Bertarelli, A. Dallocchio, L. Gentini, N. Mariani, R. Perret, M. Timmins, “Mechanical
Engineering and Design of the LHC Phase II Collimators”. IPAC-2010-TUPEB071. May
2010.
250. A. Masi and R. Losito, “LHC Collimator Lower Level Control System,” 15th IEEE NPSS
Real Time Conference 2007.
251. G. Valentino et al., “Semiautomatic beam-based LHC collimator alignment,” Phys.Rev.ST
Accel.Beams 15 (2012) 051002
252. G. Valentino et al., “Successive approximation algorithm for beam-position-monitor-based
LHC collimator alignment,” Phys.Rev.ST Accel.Beams 17 (2014) no.2, 021005
253. A. Bertarelli, O. Aberle, R.W. Assmann, A. Dallocchio, T. Kurtyka, M. Magistris, M.
Mayer, M. Santana-Leitner. “Permanent deformation of the LHC collimator jaws induced by
shock beam impact: An analytical and numerical interpretation.” Proc. EPAC 06, Edinburgh,
Scotland, 26-30 Jun 2006.
254. D. Onoprienko, M. Seidel, P. Tenenbaum, “Measurement of resistivity dominated collimator
wakefield kicks at the SLC”. SLAC-PUB-10192. Jun 2002.
255. P. Tenenbaum et al, “Collimator Wakefield Calculations for ILC-TRC Report”. SLAC-TN03-038. LCC-0101. Aug. 2002.
256. E. Metral et al, “Transverse Impedance of LHC Collimators”. PAC2007. CERN-LHCPROJECT-Report-1015.
F. Bordry et al.
236. G.Apollinari et al., “High-Luminosity Large Hadron Collider (HL-LHC): Technical Design
Report V. 0.1.” CERN Yellow Reports: Monographs. CERN-2017-007-M, Geneva: CERN,
2017.
237. G. Valentino et al., “Final implementation, commissioning, and performance of embedded
collimator beam position monitors in the Large Hadron Collider,” Phys. Rev. Accel. Beams
20 (2017) no.8, 081002
238. R. Bruce, A. Marsili, S. Redaelli, “Cleaning Performance with 11T Dipoles and Local Dispersion Suppressor Collimation at the LHC,” Proceedings, 5th International Particle Accelerator
Conference (IPAC 2014): Dresden, Germany, June 15-20, 2014. DOI: 10.18429/JACoWIPAC2014-MOPRO042
239. D. Mirarchi et al., “Cleaning Performance of the Collimation System of the High
Luminosity Large Hadron Collider,” Proceedings, 7th International Particle Accelerator
Conference (IPAC 2016): Busan, Korea, May 8-13, 2016, doi 10.18429/JACoW-IPAC2016WEPMW007.
240. C. Omet, H. Kollmus, H. Reich-Sprenger, P.J. Spiller, “Ion Catcher System for the Stabilisation of the Dynamic Pressure in SIS18”. EPAC08-MOPC099. Jun 23, 2008.
241. R. Assmann et al, “The final collimation system for the LHC”. EPAC06. LHC-Project-Report919.
242. D. Wollmann et al., “Beam feasibility study of a collimator with in-jaw beam position
monitors,” Nucl.Instrum.Meth. A768 (2014) 62-68
243. The FCC collaboration (Abada, A. and others), “HE-LHC: The High-Energy Large Hadron
Collider,” Eur.Phys.J.ST 228 (2019) no.5, 1109-1382
244. The FCC collaboration (Abada, A. and others), “FCC-hh: The Hadron Collider: Future
Circular Collider Conceptual Design Report Volume 3,” Eur.Phys.J.ST 228 (2019) no.4, 7551107
245. N.V. Mokhov, P.C. Czarapata, A.I. Drozhdin, D.A. Still, R.V. Samulyak. “Beam-induced
damage to the Tevatron components and what has been done about it”. FERMILAB-CONF06-415-AD, FERMILAB-APC, Nov 2006. Presented at HB2006, Tsukuba, Japan, 29 May -
2 Jun 2006.
246. R. Bruce, R. Assmann, S. Redaelli, “Calculations of safe collimator settings and β ∗ at the
CERN Large Hadron Collider,” Phys.Rev.ST Accel.Beams 18 (2015) no.6, 061001
247. R. Bruce et al., “Reaching record-low β ∗ β ∗ at the CERN Large Hadron Collider using a novel
scheme of collimator settings and optics,” Nucl.Instrum.Meth. A848 (2017) 19-30
248. A.Bertarelli et al, “The Mechanical Design for the LHC Collimators”. EPAC04. LHC-ProjectReport-786.
249. A. Bertarelli, A. Dallocchio, L. Gentini, N. Mariani, R. Perret, M. Timmins, “Mechanical
Engineering and Design of the LHC Phase II Collimators”. IPAC-2010-TUPEB071. May
2010.
250. A. Masi and R. Losito, “LHC Collimator Lower Level Control System,” 15th IEEE NPSS
Real Time Conference 2007.
251. G. Valentino et al., “Semiautomatic beam-based LHC collimator alignment,” Phys.Rev.ST
Accel.Beams 15 (2012) 051002
252. G. Valentino et al., “Successive approximation algorithm for beam-position-monitor-based
LHC collimator alignment,” Phys.Rev.ST Accel.Beams 17 (2014) no.2, 021005
253. A. Bertarelli, O. Aberle, R.W. Assmann, A. Dallocchio, T. Kurtyka, M. Magistris, M.
Mayer, M. Santana-Leitner. “Permanent deformation of the LHC collimator jaws induced by
shock beam impact: An analytical and numerical interpretation.” Proc. EPAC 06, Edinburgh,
Scotland, 26-30 Jun 2006.
254. D. Onoprienko, M. Seidel, P. Tenenbaum, “Measurement of resistivity dominated collimator
wakefield kicks at the SLC”. SLAC-PUB-10192. Jun 2002.
255. P. Tenenbaum et al, “Collimator Wakefield Calculations for ILC-TRC Report”. SLAC-TN03-038. LCC-0101. Aug. 2002.
256. E. Metral et al, “Transverse Impedance of LHC Collimators”. PAC2007. CERN-LHCPROJECT-Report-1015.