56
6. K. Kerrouche, A. Mezouar, Kh. Belgacem. “Decoupled control of doubly fed induction generator by vector control for wind energy conversion system”, Energy Procedia, 2013.
7. Majid A. Abdullah, A.H.M. Yatim, Chee Wei Tan. “A study of maximum power point tracking
algorithms for wind energy system”, 2011 IEEE Conference on Clean Energy and Technology
(CET), 2011.
8. Md. Faruque Hossain. “Green science: Independent building technology to mitigate energy,
environment, and climate change”, Renewable and Sustainable Energy Reviews, 2017.
9. Abdelhamid Loukriz, Mourad Haddadi, Sabir Messalti. “Simulation and experimental design
of a new advanced variable step size Incremental Conductance MPPT algorithm for PV systems”, ISA Transactions, 2016.
10. Junyent-Ferre, A. “Modeling and control of the doubly fed induction generator wind turbine”,
Simulation Modelling Practice and Theory, 201010.
11. Md. Faruque Hossain. “Theoretical modeling for hybrid renewable energy: An Initiative to
Meet the Global Energy”, Journal of Sustainable Energy Engineering, 2016.
12. Ahmed M. Othman, Mahdi M.M. El-arini, Ahmed Ghitas, Ahmed Fathy. “Real-world maximum power point tracking simulation of PV system based on Fuzzy Logic control”, NRIAG
Journal of Astronomy and Geophysics, 2019.
13. Mario Di Nardo, Mosè Gallo, Teresa Murino, Liberatina Carmela Santillo. “System dynamics
simulation for fire and explosion risk analysis in home environment”, International Review on
Modelling and Simulations (IREMOS), 2017.
14. Sara Mohamed Ismail, Ahmed Ali Daoud, Kamel Ahmed El-Serafi, Sobhy Serry Dessouky.
“A novel control strategy for improving the power quality of an isolated microgrid under different load conditions”, 2018 Twentieth International Middle East Power Systems Conference
(MEPCON), 2018.
15. Loucif, Mourad, and Abdelmadjid Boumediene. “Modeling and direct power control for a
DFIG under wind speed variation”, 2015 3rd International Conference on Control Engineering
& Information Technology (CEIT), 2015.
16. Md. Faruque Hossain. “Photon application in the design of sustainable buildings to console
global energy and environment”, Applied Thermal Engineering, 2018.
17. Getachew Bekele, Getnet Tadesse. “Feasibility study of small hydro/PV/wind hybrid system
for off-grid rural electrification in Ethiopia”, Applied Energy, 2012.
18. Sakthivel, B. Kanaga, and D. Devaraj. “Modelling, simulation and performance evaluation of
solar PV/wind hybrid energy system”, 2015 International Conference on Electrical Electronics
Signals Communication and Optimization (EESCO), 2015.
19. Phan, Dinh-Chung, and Shigeru Yamamoto. “Rotor speed control of doubly fed induction generator wind turbines using adaptive maximum power point tracking”, Energy, 2016.
20. K. Kerrouche, A. Mezouar, L. Boumedien. “A simple and efficient maximized power control
of DFIG variable speed wind turbine”, 3rd International Conference.
21. Md. Faruque Hossain. “Advanced building design”, Elsevier BV, 2019.
22. H. Amimeur, D. Aouzellag, R. Abdessemed, K. Ghedamsi. “Sliding mode control of a dualstator induction generator for wind energy conversion systems”, International Journal of
Electrical Power & Energy Systems, 2012.
23. Zohoori, Alireza, Abolfazl Vahedi, Mohammad Ali Noroozi, and Santolo Meo. “A new outerrotor flux switching permanent magnet generator for wind farm applications: Flux switching
permanent magnet generator for wind farm applications”, Wind Energy, 2016.
24. Manfred Stieber, Wind Energy System for Electric Power Generation (Springer, Verlag Berlin
Heidelberg, 2008).
25. Gunasekaran Nallappan, Young-Hoon Joo. “Robust sampled-data fuzzy control for nonlinear systems and its applications: Free-weight matrix method”, IEEE Transactions on Fuzzy
Systems, 2019.
26. Ouled Amor, Walid, A. Ltifi, and M. Ghariani. “Study of a wind energy conversion systems
based on doubly-fed induction generator”, International Review on Modelling and Simulations
(IREMOS), 2014.
3 Wind Energy
6. K. Kerrouche, A. Mezouar, Kh. Belgacem. “Decoupled control of doubly fed induction generator by vector control for wind energy conversion system”, Energy Procedia, 2013.
7. Majid A. Abdullah, A.H.M. Yatim, Chee Wei Tan. “A study of maximum power point tracking
algorithms for wind energy system”, 2011 IEEE Conference on Clean Energy and Technology
(CET), 2011.
8. Md. Faruque Hossain. “Green science: Independent building technology to mitigate energy,
environment, and climate change”, Renewable and Sustainable Energy Reviews, 2017.
9. Abdelhamid Loukriz, Mourad Haddadi, Sabir Messalti. “Simulation and experimental design
of a new advanced variable step size Incremental Conductance MPPT algorithm for PV systems”, ISA Transactions, 2016.
10. Junyent-Ferre, A. “Modeling and control of the doubly fed induction generator wind turbine”,
Simulation Modelling Practice and Theory, 201010.
11. Md. Faruque Hossain. “Theoretical modeling for hybrid renewable energy: An Initiative to
Meet the Global Energy”, Journal of Sustainable Energy Engineering, 2016.
12. Ahmed M. Othman, Mahdi M.M. El-arini, Ahmed Ghitas, Ahmed Fathy. “Real-world maximum power point tracking simulation of PV system based on Fuzzy Logic control”, NRIAG
Journal of Astronomy and Geophysics, 2019.
13. Mario Di Nardo, Mosè Gallo, Teresa Murino, Liberatina Carmela Santillo. “System dynamics
simulation for fire and explosion risk analysis in home environment”, International Review on
Modelling and Simulations (IREMOS), 2017.
14. Sara Mohamed Ismail, Ahmed Ali Daoud, Kamel Ahmed El-Serafi, Sobhy Serry Dessouky.
“A novel control strategy for improving the power quality of an isolated microgrid under different load conditions”, 2018 Twentieth International Middle East Power Systems Conference
(MEPCON), 2018.
15. Loucif, Mourad, and Abdelmadjid Boumediene. “Modeling and direct power control for a
DFIG under wind speed variation”, 2015 3rd International Conference on Control Engineering
& Information Technology (CEIT), 2015.
16. Md. Faruque Hossain. “Photon application in the design of sustainable buildings to console
global energy and environment”, Applied Thermal Engineering, 2018.
17. Getachew Bekele, Getnet Tadesse. “Feasibility study of small hydro/PV/wind hybrid system
for off-grid rural electrification in Ethiopia”, Applied Energy, 2012.
18. Sakthivel, B. Kanaga, and D. Devaraj. “Modelling, simulation and performance evaluation of
solar PV/wind hybrid energy system”, 2015 International Conference on Electrical Electronics
Signals Communication and Optimization (EESCO), 2015.
19. Phan, Dinh-Chung, and Shigeru Yamamoto. “Rotor speed control of doubly fed induction generator wind turbines using adaptive maximum power point tracking”, Energy, 2016.
20. K. Kerrouche, A. Mezouar, L. Boumedien. “A simple and efficient maximized power control
of DFIG variable speed wind turbine”, 3rd International Conference.
21. Md. Faruque Hossain. “Advanced building design”, Elsevier BV, 2019.
22. H. Amimeur, D. Aouzellag, R. Abdessemed, K. Ghedamsi. “Sliding mode control of a dualstator induction generator for wind energy conversion systems”, International Journal of
Electrical Power & Energy Systems, 2012.
23. Zohoori, Alireza, Abolfazl Vahedi, Mohammad Ali Noroozi, and Santolo Meo. “A new outerrotor flux switching permanent magnet generator for wind farm applications: Flux switching
permanent magnet generator for wind farm applications”, Wind Energy, 2016.
24. Manfred Stieber, Wind Energy System for Electric Power Generation (Springer, Verlag Berlin
Heidelberg, 2008).
25. Gunasekaran Nallappan, Young-Hoon Joo. “Robust sampled-data fuzzy control for nonlinear systems and its applications: Free-weight matrix method”, IEEE Transactions on Fuzzy
Systems, 2019.
26. Ouled Amor, Walid, A. Ltifi, and M. Ghariani. “Study of a wind energy conversion systems
based on doubly-fed induction generator”, International Review on Modelling and Simulations
(IREMOS), 2014.
3 Wind Energy