TABLE 4.25 Continued
Maximum Te mperature
Chemical
8 F
8 C
Sulfuric acid, 100%
XX
Sulfuric acid, fuming
XX
Sulfurous acid, 25%
210
99
Toluene
90
32
Trichloroacetic acid
90
32
Zinc chloride2 00
93
The chemicals listed are in the pure state or in as aturated solution
unless otherwise indicated. Compatibility is shown to the maximum
allowable temperaturefor which data is available. Incompatibilityis
shown by an X. Ablank space indicates that the data is unavailable.
Source:F rom P. A. Schweitzer.2 004. Corrosion ResistanceT ables ,
Vols. 1–4, 5th ed., New York: Marcel Dekker.
TABLE 4.26
General Application Guide for Chlorinated Polyesters
Environment
Comments
Acid halides
Not recommended
Acids, mineral
nonoxidizing
Resistant to 2508 F/1218 C
Acids, organicR esistant to 2508 F/1218 C; glacial acetic acid to
1208 F/498 C
Alcohols
Resistant to 1808 F/828 C
Aldehydes
Resistant to 1808 F/828 C
Alkaline solutions pHO 10
Note recommended for continuous exposure
Amines, aliphatic, primary
aromatic
Can cause severeattack
Amides, other alkaline organics
Can cause severeattack
Esters, organic
Resistant to 1808 F/828 C
Fats and oils
Resistant to 2008 F/958 C
Glycols
Resistant to 1808 F/828 C
Ketones
Resistant to 1808 F/828 C
Mercaptans
Resistant to 1808 F/828 C
Phenol
Not recommended
Salts, acid
Resistant to 2508 F/1218 C
Salts, neutral
Resistant to 2508 F/1218 C
Water,demineralized,
distilled, deionized,
steam and condensate
Resistant to 2128 F/1008 C; lowest absorption of any
polyester
Liquid-Applied Linings
167
CAT8247—CHAPTER 4—17/10/2006—14:36—SRIDHAR—XML MODEL B–pp. 69–174