Local Stress and Damage Response of Polycrystal Materials to Light Shock. . .
221
34. S.R. Kalidindi, C.A. Bronkhorst, L. Anand, Crystallographic texture evolution in bulk deformation processing of FCC metals. J. Mech. Phys. Solids 40, 537–569 (1992)
35. M. Knezevic, B. Drach, M. Ardeljan, I.J. Beyerlein, Three dimensional predictions of grain
scale plasticity and grain boundaries using crystal plasticity finite element models. Comput.
Methods Appl. Mech. Eng. 277, 239–259 (2014)
36. U.F. Kocks, A.S. Argon, M.F. Ashby, Thermodynamics and Kinetics of Slip. Progress in
Materials Science (Pergamon, Oxford, 1975)
37. U.F. Kocks, Laws for work-hardening and low-temperature creep. J. Eng. Mater. Technol. 98,
76–85 (1976)
38. M. Kothari, L. Anand, Elasto-viscoplastic constitutive equations for polycrystalline metals:
application to tantalum. J. Mech. Phys. Solids 46, 51–83 (1998)
39. P.J. Maudlin, J.F. Bingert, J.W. House, S.R. Chen, On the modeling of the Taylor cylinder
impact test for orthotropic texture materials: experiments and simulations. Int. J. Plasticity 15,
139–166 (1999)
40. P.J. Maudlin, E.N. Harstad, T.A. Mason, Q.H. Zuo, F.L. Addessio. TEPLA-a: coupled
anisotropic elastoplasticity and damage, the Joint DoD/DOE Munitions Technology Program
progress report, LA-UR-14015-PR (2003)
41. S. Nemat-Nasser, J.B. Isaacs, Direct measurement of isothermal flow stress of metals at
elevated temperatures and high strain rates with application to Ta and Ta-W alloys. Acta Mater.
45, 907–919 (1997)
42. D.J. Savage, I.J. Beyerlein, M. Knezevic, Coupled texture and non-Schmid effects on yield
surfaces on body-centered cubic polycrystals predicted by a crystal plasticity finite element
approach. Int. J. Solids Struct. 109, 22–32 (2017)
43. P. Shanthraj, M.A. Zikry, Dislocation-density mechanisms for void interactions in crystalline
materials. Int. J. Plasticity 34, 154–163 (2012)
44. V. Tvergaard, A. Needleman, Analysis of the cup-cone fracture in a round tensile bar. Acta
Metall. 32, 157–169 (1984)
45. Y.P. Varshni, Temperature dependence of the elastic constants. Phys. Rev. B 2, 3952–3958
(1970)
46. D. Versino, C.A. Bronkhorst, A computationally efficient ductile damage model accounting for
micro-inertia. Comp. Meth. Appl. Mech. Engr. 333, 395–420 (2018)
47. Q. Wu, M.A. Zikry, Dynamic fracture predictions of microstructural mechanisms and characteristics in martensitic steels. Eng. Frac. Mech. 145, 54–66 (2014)
48. Q.H. Zuo, J.R. Rice, An implicit algorithm for a rate-dependent ductile failure model. J. Appl.
Phys. 104, 083526 (2008)
49. Q.H. Zuo, Modified formulation of a rate-dependent damage model for ductile materials. J.
Appl. Phys. 107, 053513 (2010)
221
34. S.R. Kalidindi, C.A. Bronkhorst, L. Anand, Crystallographic texture evolution in bulk deformation processing of FCC metals. J. Mech. Phys. Solids 40, 537–569 (1992)
35. M. Knezevic, B. Drach, M. Ardeljan, I.J. Beyerlein, Three dimensional predictions of grain
scale plasticity and grain boundaries using crystal plasticity finite element models. Comput.
Methods Appl. Mech. Eng. 277, 239–259 (2014)
36. U.F. Kocks, A.S. Argon, M.F. Ashby, Thermodynamics and Kinetics of Slip. Progress in
Materials Science (Pergamon, Oxford, 1975)
37. U.F. Kocks, Laws for work-hardening and low-temperature creep. J. Eng. Mater. Technol. 98,
76–85 (1976)
38. M. Kothari, L. Anand, Elasto-viscoplastic constitutive equations for polycrystalline metals:
application to tantalum. J. Mech. Phys. Solids 46, 51–83 (1998)
39. P.J. Maudlin, J.F. Bingert, J.W. House, S.R. Chen, On the modeling of the Taylor cylinder
impact test for orthotropic texture materials: experiments and simulations. Int. J. Plasticity 15,
139–166 (1999)
40. P.J. Maudlin, E.N. Harstad, T.A. Mason, Q.H. Zuo, F.L. Addessio. TEPLA-a: coupled
anisotropic elastoplasticity and damage, the Joint DoD/DOE Munitions Technology Program
progress report, LA-UR-14015-PR (2003)
41. S. Nemat-Nasser, J.B. Isaacs, Direct measurement of isothermal flow stress of metals at
elevated temperatures and high strain rates with application to Ta and Ta-W alloys. Acta Mater.
45, 907–919 (1997)
42. D.J. Savage, I.J. Beyerlein, M. Knezevic, Coupled texture and non-Schmid effects on yield
surfaces on body-centered cubic polycrystals predicted by a crystal plasticity finite element
approach. Int. J. Solids Struct. 109, 22–32 (2017)
43. P. Shanthraj, M.A. Zikry, Dislocation-density mechanisms for void interactions in crystalline
materials. Int. J. Plasticity 34, 154–163 (2012)
44. V. Tvergaard, A. Needleman, Analysis of the cup-cone fracture in a round tensile bar. Acta
Metall. 32, 157–169 (1984)
45. Y.P. Varshni, Temperature dependence of the elastic constants. Phys. Rev. B 2, 3952–3958
(1970)
46. D. Versino, C.A. Bronkhorst, A computationally efficient ductile damage model accounting for
micro-inertia. Comp. Meth. Appl. Mech. Engr. 333, 395–420 (2018)
47. Q. Wu, M.A. Zikry, Dynamic fracture predictions of microstructural mechanisms and characteristics in martensitic steels. Eng. Frac. Mech. 145, 54–66 (2014)
48. Q.H. Zuo, J.R. Rice, An implicit algorithm for a rate-dependent ductile failure model. J. Appl.
Phys. 104, 083526 (2008)
49. Q.H. Zuo, Modified formulation of a rate-dependent damage model for ductile materials. J.
Appl. Phys. 107, 053513 (2010)