124
D. W. Eastman et al.
73. S.K. Slaughter et al., High throughput femtosecond-laser machining of micro-tension specimens, in TMS 2015 144th Annual Meeting & Exhibition, (Springer, New York, NY, 2015)
74. C.B. Schaffer et al., Micromachining bulk glass by use of femtosecond laser pulses with
nanojoule energy. Opt. Lett. 26(2), 93–95 (2001)
75. M.J. Pfeifenberger et al., The use of femtosecond laser ablation as a novel tool for rapid
micro-mechanical sample preparation. Mater. Des. 121, 109–118 (2017)
76. S.A. Akhmanov, V.A. Vysloukh, A.S. Chirkin, Optics of Femtosecond Laser Pulses (Izdatel
Nauka, Moscow, 1988)
77. P.P. Pronko et al., Machining of sub-micron holes using a femtosecond laser at 800 nm. Opt.
Commun. 114(1), 106–110 (1995)
78. D. von der Linde, K. Sokolowski-Tinten, J. Bialkowski, Laser–solid interaction in the
femtosecond time regime. Appl. Surf. Sci. 109–110, 1–10 (1997)
79. D. Perez, L.J. Lewis, Molecular-dynamics study of ablation of solids under femtosecond laser
pulses. Phys. Rev. B 67(18), 184102 (2003)
80. S. Preuss, A. Demchuk, M. Stuke, Sub-picosecond UV laser ablation of metals. Appl. Phys.
A 61(1), 33–37 (1995)
81. M.D. Shirk, P.A. Molian, A review of ultrashort pulsed laser ablation of materials. J. Laser
Appl. 10(1), 18–28 (1998)
82. A. Ostendorf, Femtosecond laser machining, in Technical Digest. CLEO/Pacific Rim 2001.
4th Pacific Rim Conference on Lasers and Electro-Optics (Cat. No.01TH8557), 2001
83. S. Ma et al., Femtosecond laser ablation regimes in a single-crystal superalloy. Metall. Mater.
Trans. A 38(13), 2349–2357 (2007)
84. W. Zhang et al., Femtosecond laser machining characteristics in a single-crystal superalloy.
Rare Metals 30(1), 639–642 (2011)
85. N.G. Semaltianos et al., Femtosecond laser ablation characteristics of nickel-based superalloy
C263. Appl. Phys. A 94(4), 999 (2008)
86. E.G. Gamaly et al., Ablation of solids by femtosecond lasers: ablation mechanism and
ablation thresholds for metals and dielectrics. Phys. Plasmas 9(3), 949–957 (2002)
87. D. Di Maio, S.G. Roberts, Measuring fracture toughness of coatings using focused-ion-beammachined microbeams. J. Mater. Res. 20(2), 299–302 (2005)
88. J. McCarthy et al., FIB micromachined submicron thickness cantilevers for the study of thin
film properties. Thin Solid Films 358(1), 146–151 (2000)
89. D. Kiener et al., FIB damage of Cu and possible consequences for miniaturized mechanical
tests. Mater. Sci. Eng. A 459(1–2), 262–272 (2007)
90. J. Sipe et al., Laser-induced periodic surface structure. I. Theory. Phys. Rev. B 27(2), 1141
(1983)
91. J. Bonse et al., Femtosecond laser-induced periodic surface structures. J. Laser Appl. 24(4),
042006 (2012)
92. R. Hill, Elastic properties of reinforced solids: some theoretical principles. J. Mech. Phys.
Solids 11(5), 357–372 (1963)
93. M.P. Echlin, W.C. Lenthe, T.M. Pollock, Three-dimensional sampling of material structure
for property modeling and design. Int. Mater. Manuf. Innov. 3(1), 21 (2014)
94. A. Ma, F. Roters, D. Raabe, A dislocation density based constitutive model for crystal
plasticity FEM including geometrically necessary dislocations. Acta Mater. 54(8), 2169–2179
(2006)
95. M.D. Uchic, D.M. Dimiduk, A methodology to investigate size scale effects in crystalline
plasticity using uniaxial compression testing. Mater. Sci. Eng. A 400-401, 268–278 (2005)
96. C.H. Suh, Y.-C. Jung, Y.S. Kim, Effects of thickness and surface roughness on mechanical
properties of aluminum sheets. J. Mech. Sci. Technol. 24(10), 2091–2098 (2010)
97. S. Miyazaki, K. Shibata, H. Fujita, Effect of specimen thickness on mechanical properties of
polycrystalline aggregates with various grain sizes. Acta Metall. 27(5), 855–862 (1979)
98. S. Chauhan, A.F. Bastawros, Probing thickness-dependent dislocation storage in freestanding
cu films using residual electrical resistivity. Appl. Phys. Lett. 93(4), 041901 (2008)
D. W. Eastman et al.
73. S.K. Slaughter et al., High throughput femtosecond-laser machining of micro-tension specimens, in TMS 2015 144th Annual Meeting & Exhibition, (Springer, New York, NY, 2015)
74. C.B. Schaffer et al., Micromachining bulk glass by use of femtosecond laser pulses with
nanojoule energy. Opt. Lett. 26(2), 93–95 (2001)
75. M.J. Pfeifenberger et al., The use of femtosecond laser ablation as a novel tool for rapid
micro-mechanical sample preparation. Mater. Des. 121, 109–118 (2017)
76. S.A. Akhmanov, V.A. Vysloukh, A.S. Chirkin, Optics of Femtosecond Laser Pulses (Izdatel
Nauka, Moscow, 1988)
77. P.P. Pronko et al., Machining of sub-micron holes using a femtosecond laser at 800 nm. Opt.
Commun. 114(1), 106–110 (1995)
78. D. von der Linde, K. Sokolowski-Tinten, J. Bialkowski, Laser–solid interaction in the
femtosecond time regime. Appl. Surf. Sci. 109–110, 1–10 (1997)
79. D. Perez, L.J. Lewis, Molecular-dynamics study of ablation of solids under femtosecond laser
pulses. Phys. Rev. B 67(18), 184102 (2003)
80. S. Preuss, A. Demchuk, M. Stuke, Sub-picosecond UV laser ablation of metals. Appl. Phys.
A 61(1), 33–37 (1995)
81. M.D. Shirk, P.A. Molian, A review of ultrashort pulsed laser ablation of materials. J. Laser
Appl. 10(1), 18–28 (1998)
82. A. Ostendorf, Femtosecond laser machining, in Technical Digest. CLEO/Pacific Rim 2001.
4th Pacific Rim Conference on Lasers and Electro-Optics (Cat. No.01TH8557), 2001
83. S. Ma et al., Femtosecond laser ablation regimes in a single-crystal superalloy. Metall. Mater.
Trans. A 38(13), 2349–2357 (2007)
84. W. Zhang et al., Femtosecond laser machining characteristics in a single-crystal superalloy.
Rare Metals 30(1), 639–642 (2011)
85. N.G. Semaltianos et al., Femtosecond laser ablation characteristics of nickel-based superalloy
C263. Appl. Phys. A 94(4), 999 (2008)
86. E.G. Gamaly et al., Ablation of solids by femtosecond lasers: ablation mechanism and
ablation thresholds for metals and dielectrics. Phys. Plasmas 9(3), 949–957 (2002)
87. D. Di Maio, S.G. Roberts, Measuring fracture toughness of coatings using focused-ion-beammachined microbeams. J. Mater. Res. 20(2), 299–302 (2005)
88. J. McCarthy et al., FIB micromachined submicron thickness cantilevers for the study of thin
film properties. Thin Solid Films 358(1), 146–151 (2000)
89. D. Kiener et al., FIB damage of Cu and possible consequences for miniaturized mechanical
tests. Mater. Sci. Eng. A 459(1–2), 262–272 (2007)
90. J. Sipe et al., Laser-induced periodic surface structure. I. Theory. Phys. Rev. B 27(2), 1141
(1983)
91. J. Bonse et al., Femtosecond laser-induced periodic surface structures. J. Laser Appl. 24(4),
042006 (2012)
92. R. Hill, Elastic properties of reinforced solids: some theoretical principles. J. Mech. Phys.
Solids 11(5), 357–372 (1963)
93. M.P. Echlin, W.C. Lenthe, T.M. Pollock, Three-dimensional sampling of material structure
for property modeling and design. Int. Mater. Manuf. Innov. 3(1), 21 (2014)
94. A. Ma, F. Roters, D. Raabe, A dislocation density based constitutive model for crystal
plasticity FEM including geometrically necessary dislocations. Acta Mater. 54(8), 2169–2179
(2006)
95. M.D. Uchic, D.M. Dimiduk, A methodology to investigate size scale effects in crystalline
plasticity using uniaxial compression testing. Mater. Sci. Eng. A 400-401, 268–278 (2005)
96. C.H. Suh, Y.-C. Jung, Y.S. Kim, Effects of thickness and surface roughness on mechanical
properties of aluminum sheets. J. Mech. Sci. Technol. 24(10), 2091–2098 (2010)
97. S. Miyazaki, K. Shibata, H. Fujita, Effect of specimen thickness on mechanical properties of
polycrystalline aggregates with various grain sizes. Acta Metall. 27(5), 855–862 (1979)
98. S. Chauhan, A.F. Bastawros, Probing thickness-dependent dislocation storage in freestanding
cu films using residual electrical resistivity. Appl. Phys. Lett. 93(4), 041901 (2008)