516
M. Matsuda et al.
Acknowledgements The authors thank members of Technical Committee “DEcoF (Digital Eco
Factory)” (2012. Oct.) by FAOP (FA Open Systems Promotion Forum) in MSTC (Manufacturing
Science and Technology Center), Japan for fruitful discussions and their supports. Especially, the
authors are thankful to Mr. Masayuki Kitajima for his great contributions. The authors are grateful
to Dr. Udo Graefe, retired from the National Research Council of Canada for his helpful assistance
with the writing of this paper in English. This work is supported by JSPS KAKENHI KIBAN (A)
18H03826.
References
Bley H, Franke C (2004) Integration of product design and assembly planning in the digital factory.
CIRP Ann Manuf Technol 53(1):25–30
Freedman S (1999) An overview of fully integrated digital manufacturing technology. In:
Proceedings of the 1999 Winter Simulation Conference, pp 281–285
Gregor M, Medvecký Š, Matuszek J, Štefánik A (2009) Digital factory. J Autom Mob Rob Intel
Syst 3(3):123–132
Kozo Keikaku Engineering Inc., Users manual of artisoc, mas.kke.co.jp/cabinet/manual-en.pdf
Kuehn W (2006) Digital factory—integration of simulation enhancing the product and production
process towards operative control and optimization. I J Simul 7(7):28–39
Matsuda M, Kasiwase K, Sudo Y (2012) Agent oriented construction of a digital factory for
validation of a production scenario. Procedia CIRP 3:115–120
Matsuda M, Kimura F (2012) Configuration of the digital eco-factory for green production. Int J
Autom Technol 6(3):289–295
Matsuda M, Kimura F (2013) Digital eco-factory as an IT support tool for sustainable manufacturing, digital product and process development systems, IFIP advances in information and
communication technology vol 411, Springer, pp 330–342
Matsuda M, Kimura F (2015) Usage of a digital eco-factory for sustainable manufacturing. CIRP
J Manuf Sci Technol 9:97–106
Matsuda M, Sudo Y, Kimura F (2015) A multi-agent based construction of the digital eco-factory
for a printed-circuit assembly line. Procedia CIRP 41:218–223
Matsuda M, Matsumoto S, Noyama N, Sudo Y, Kimura F (2016) E-catalogue library of machines
for constructing virtual printed-circuit assembly lines. Procedia CIRP 57:562–567
Matsumoto S, Matsuda M (2017) Construction of a virtual production line including a buffer for
simulation of electric power consumption. In: Procedia CIRP vol 63, pp 465–470
Monostori L (2014) Cyber-physical production systems. Roots, Expect R&D Challenges: Procedia
CIRP 17:9–13
Monostori L, Váncza J, Kumara S (2006) Agent-based systems for manufacturing. CIRP Ann Manuf
Technol 55(2):697–720
NetLogo https://ccl.northwestern.edu/netlogo
M. Matsuda et al.
Acknowledgements The authors thank members of Technical Committee “DEcoF (Digital Eco
Factory)” (2012. Oct.) by FAOP (FA Open Systems Promotion Forum) in MSTC (Manufacturing
Science and Technology Center), Japan for fruitful discussions and their supports. Especially, the
authors are thankful to Mr. Masayuki Kitajima for his great contributions. The authors are grateful
to Dr. Udo Graefe, retired from the National Research Council of Canada for his helpful assistance
with the writing of this paper in English. This work is supported by JSPS KAKENHI KIBAN (A)
18H03826.
References
Bley H, Franke C (2004) Integration of product design and assembly planning in the digital factory.
CIRP Ann Manuf Technol 53(1):25–30
Freedman S (1999) An overview of fully integrated digital manufacturing technology. In:
Proceedings of the 1999 Winter Simulation Conference, pp 281–285
Gregor M, Medvecký Š, Matuszek J, Štefánik A (2009) Digital factory. J Autom Mob Rob Intel
Syst 3(3):123–132
Kozo Keikaku Engineering Inc., Users manual of artisoc, mas.kke.co.jp/cabinet/manual-en.pdf
Kuehn W (2006) Digital factory—integration of simulation enhancing the product and production
process towards operative control and optimization. I J Simul 7(7):28–39
Matsuda M, Kasiwase K, Sudo Y (2012) Agent oriented construction of a digital factory for
validation of a production scenario. Procedia CIRP 3:115–120
Matsuda M, Kimura F (2012) Configuration of the digital eco-factory for green production. Int J
Autom Technol 6(3):289–295
Matsuda M, Kimura F (2013) Digital eco-factory as an IT support tool for sustainable manufacturing, digital product and process development systems, IFIP advances in information and
communication technology vol 411, Springer, pp 330–342
Matsuda M, Kimura F (2015) Usage of a digital eco-factory for sustainable manufacturing. CIRP
J Manuf Sci Technol 9:97–106
Matsuda M, Sudo Y, Kimura F (2015) A multi-agent based construction of the digital eco-factory
for a printed-circuit assembly line. Procedia CIRP 41:218–223
Matsuda M, Matsumoto S, Noyama N, Sudo Y, Kimura F (2016) E-catalogue library of machines
for constructing virtual printed-circuit assembly lines. Procedia CIRP 57:562–567
Matsumoto S, Matsuda M (2017) Construction of a virtual production line including a buffer for
simulation of electric power consumption. In: Procedia CIRP vol 63, pp 465–470
Monostori L (2014) Cyber-physical production systems. Roots, Expect R&D Challenges: Procedia
CIRP 17:9–13
Monostori L, Váncza J, Kumara S (2006) Agent-based systems for manufacturing. CIRP Ann Manuf
Technol 55(2):697–720
NetLogo https://ccl.northwestern.edu/netlogo