396
D. M. Harwani et al.
29. Kandalam S, Sabat RK, Bibhanshu N, Avadhani GS et al (2017) Superplasticity in high
temperature magnesium alloy WE43. Mater Sci Eng A 687:85–92
30. Łyszkowski R, Czujko T, Varin RA (2017) Multi-axial forging of Fe 3 Al-base intermetallic
alloy and its mechanical properties. J Mater Sci 52:2902–2914
31. Funami K, Noda M (2011) Grain refinement of magnesium alloy by multiaxial alternative
forging and hydrogenation treatment. In: Czerwinski F (2011) Magnesium alloys—design,
processing and properties. IntechOpen. https://doi.org/10.5772/13189
32. Tsuji N, Saito Y, Lee S, Minamino Y (2003) ARB (Accumulated Roll Bonding) and other new
techniques to produce bulk ultrafine grained materials. Adv Eng Mater 5(5):338–344
33. Azushima A, Kopp R, Korhonen A, Yang DY, Micari F et al (2008) Severe plastic deformation
(SPD) processes for metals. CIRP Ann—Manuf Technol 57(2):716–735
34. Tsuji N, Shiotsuki K, Utsunomiya H, Saito Y (1999) Low temperature superplasticity of ultrafine grained 5083 aluminium alloy produced by accumulative roll bonding. Mater Sci Forum
304–306:73–78
35. Wang QF, Xiao XP, Hu J (2007) An ultrafine-grained AZ31 magnesium alloy sheet with
enhanced superplasticity prepared by accumulative roll bonding, pp 2–7
36. Akbarzadeh A (2011) Nanostructure, texture evolution and mechanical properties of aluminum
alloys processed by severe plastic deformation. In: Ahmad Z (ed) Recent trends in processing
and degradation of aluminium alloys. https://doi.org/10.5772/18567
37. Lin J, Ren W, Wang Q, Ma L, Chen Y (2014) Influence of grain size and texture on the yield
strength of Mg alloys processed by severe plastic deformation. Adv Mater Sci Eng 2014:24–32
38. Martynenko NS, Lukyanova EA, Serebryany VN, Gorshenkov MV et al (2017) Increasing
strength and ductility of magnesium alloy WE43 by equal-channel angular pressing. Mater Sci
Eng A. https://doi.org/10.1016/j.mesa.2017.12.026
39. Nemoto M, Horita Z, Furukawa M, Langdon TG (1999) Microstructural evolution for
superplasticity using equal-channel angular pressing. Mater Sci Forum 304–306:59–66
40. Kunz L (2012) Mechanical properties of copper processed by severe plastic deformation.
In: Collini L (ed) Copper alloys—early applications and current performance—enhancing
processes. IntechOpen. https://doi.org/10.5772/32634
41. Patel V, Li WY, Vairis A, Badheka VJ (2019) Recent development in friction stir processing as
a solid-state grain refinement technique: microstructural evolution and property enhancement.
Crit Rev Solid State Mater Sci 44(5):378–426. https://doi.org/10.1080/10408436.2018.149
0251
42. Cavaliere P, Marco PP (2007) Friction stir processing of AM60B magnesium alloy sheets.
Mater Sci Eng A 462:393–397
43. Jin Y, Wang K, Wang W, Peng P, Zhou P et al (2019) Microstructure and mechanical properties
of AE42 rare earth-containing magnesium alloy prepared by friction stir processing. Mater
Characterization 150:52–61
44. Patel V, Li WY, Liu X, Wen Q, Su Y (2019) Through-thickness microstructure and mechanical properties in stationary shoulder friction stir processed AA7075. Mater Sci Technol
35(14):1762–1769
45. Mohan A, Yuan W, Mishra RS (2013) A High strain rate superplasticity in friction stir processed
ultrafine grained Mg–Al–Zn alloys. Mater Sci Eng 562:69–76
46. Patel V, Li W, Xu Y (2018) Stationary shoulder tool in friction stir processing: a novel low heat
input tooling system for magnesium alloy. Mater Manuf Process 34(2):1–6
47. Patel V, Li W, Liu X, Wen Q et al (2020) Tailoring grain refinement through thickness in
magnesium alloy via stationary shoulder friction stir processing and copper backing plate.
Mater Sci Eng A 784:139322
48. Patel V, Li W, Wen Q (2019) Surface analysis of stationary shoulder friction stir processed
AZ31B magnesium alloy. Mater Sci Technol 35(5):628–631
49. Patel VV, Badheka VJ, Kumar A (2016) Friction stir processing as a novel technique to achieve
superplasticity in aluminum alloys: process variables, variants, and applications. Metallogr
Microstruct Anal 5:278–293
D. M. Harwani et al.
29. Kandalam S, Sabat RK, Bibhanshu N, Avadhani GS et al (2017) Superplasticity in high
temperature magnesium alloy WE43. Mater Sci Eng A 687:85–92
30. Łyszkowski R, Czujko T, Varin RA (2017) Multi-axial forging of Fe 3 Al-base intermetallic
alloy and its mechanical properties. J Mater Sci 52:2902–2914
31. Funami K, Noda M (2011) Grain refinement of magnesium alloy by multiaxial alternative
forging and hydrogenation treatment. In: Czerwinski F (2011) Magnesium alloys—design,
processing and properties. IntechOpen. https://doi.org/10.5772/13189
32. Tsuji N, Saito Y, Lee S, Minamino Y (2003) ARB (Accumulated Roll Bonding) and other new
techniques to produce bulk ultrafine grained materials. Adv Eng Mater 5(5):338–344
33. Azushima A, Kopp R, Korhonen A, Yang DY, Micari F et al (2008) Severe plastic deformation
(SPD) processes for metals. CIRP Ann—Manuf Technol 57(2):716–735
34. Tsuji N, Shiotsuki K, Utsunomiya H, Saito Y (1999) Low temperature superplasticity of ultrafine grained 5083 aluminium alloy produced by accumulative roll bonding. Mater Sci Forum
304–306:73–78
35. Wang QF, Xiao XP, Hu J (2007) An ultrafine-grained AZ31 magnesium alloy sheet with
enhanced superplasticity prepared by accumulative roll bonding, pp 2–7
36. Akbarzadeh A (2011) Nanostructure, texture evolution and mechanical properties of aluminum
alloys processed by severe plastic deformation. In: Ahmad Z (ed) Recent trends in processing
and degradation of aluminium alloys. https://doi.org/10.5772/18567
37. Lin J, Ren W, Wang Q, Ma L, Chen Y (2014) Influence of grain size and texture on the yield
strength of Mg alloys processed by severe plastic deformation. Adv Mater Sci Eng 2014:24–32
38. Martynenko NS, Lukyanova EA, Serebryany VN, Gorshenkov MV et al (2017) Increasing
strength and ductility of magnesium alloy WE43 by equal-channel angular pressing. Mater Sci
Eng A. https://doi.org/10.1016/j.mesa.2017.12.026
39. Nemoto M, Horita Z, Furukawa M, Langdon TG (1999) Microstructural evolution for
superplasticity using equal-channel angular pressing. Mater Sci Forum 304–306:59–66
40. Kunz L (2012) Mechanical properties of copper processed by severe plastic deformation.
In: Collini L (ed) Copper alloys—early applications and current performance—enhancing
processes. IntechOpen. https://doi.org/10.5772/32634
41. Patel V, Li WY, Vairis A, Badheka VJ (2019) Recent development in friction stir processing as
a solid-state grain refinement technique: microstructural evolution and property enhancement.
Crit Rev Solid State Mater Sci 44(5):378–426. https://doi.org/10.1080/10408436.2018.149
0251
42. Cavaliere P, Marco PP (2007) Friction stir processing of AM60B magnesium alloy sheets.
Mater Sci Eng A 462:393–397
43. Jin Y, Wang K, Wang W, Peng P, Zhou P et al (2019) Microstructure and mechanical properties
of AE42 rare earth-containing magnesium alloy prepared by friction stir processing. Mater
Characterization 150:52–61
44. Patel V, Li WY, Liu X, Wen Q, Su Y (2019) Through-thickness microstructure and mechanical properties in stationary shoulder friction stir processed AA7075. Mater Sci Technol
35(14):1762–1769
45. Mohan A, Yuan W, Mishra RS (2013) A High strain rate superplasticity in friction stir processed
ultrafine grained Mg–Al–Zn alloys. Mater Sci Eng 562:69–76
46. Patel V, Li W, Xu Y (2018) Stationary shoulder tool in friction stir processing: a novel low heat
input tooling system for magnesium alloy. Mater Manuf Process 34(2):1–6
47. Patel V, Li W, Liu X, Wen Q et al (2020) Tailoring grain refinement through thickness in
magnesium alloy via stationary shoulder friction stir processing and copper backing plate.
Mater Sci Eng A 784:139322
48. Patel V, Li W, Wen Q (2019) Surface analysis of stationary shoulder friction stir processed
AZ31B magnesium alloy. Mater Sci Technol 35(5):628–631
49. Patel VV, Badheka VJ, Kumar A (2016) Friction stir processing as a novel technique to achieve
superplasticity in aluminum alloys: process variables, variants, and applications. Metallogr
Microstruct Anal 5:278–293