232
H. H. Jadav et al.
28. Cao R, Wen B, Chen J, Wang P (2013) Cold Metal Transfer joining of magnesium AZ31B-toaluminum A6061-T6. Mater Sci Eng, A 560:256–266
29. Mehta K, Patel R, Vyas H, Memon S, Vilaça P (2020) Repairing of exit-hole in dissimilar
Al-Mg friction stir welding: process and microstructural pattern. Manuf Lett 23:67–70
30. Kumar U, Acharya U, Saha S, Roy B (2020) Microstructure and mechanical property of friction
stir welded Al-Mg joints by adopting modified joint configuration technique. Mater Today Proc
26:2083–2088
31. Kumar S, Wu C (2020) Suppression of intermetallic reaction layer by ultrasonic assistance
during friction stir welding of Al and Mg based alloys. J Alloy Compd 827:154343
32. Mehta K, Carlone P, Astarita A, Scherillo F, Rubino F, Vora P (2019) Conventional and cooling
assisted friction stir welding of AA6061 and AZ31B alloys. Mater Sci Eng, A 759:252–261
33. Li G, Zhou L, Luo S, Huang Y, Guo N, Zhao H (2019) Effect of self-reacting friction stir welding
on microstructure and mechanical properties of Mg-Al-Zn alloy joints. J Manuf Processes
37:1–10
34. Esmaily M, Mortazavi N, Osikowicz W, Hindsefelt H, Svensson J, Halvarsson M, Thompson
G, Johansson L (2016) Corrosion behaviour of friction stir-welded AA6005-T6 using a bobbin
tool. Corros Sci 111:98–109
35. Avettand-Fènoël M, Taillard R (2016) Effect of a pre or postweld heat treatment on
microstructure and mechanical properties of an AA2050 weld obtained by SSFSW. Mater
Des 89:348–361
36. Christensen A (2018) The feasibility of augmenting a fixed-gap Bobbin friction stir welding
tool with cutters to join enclosed castings tool with cutters to join enclosed castings. All Theses
and Dissertations
37. Threadgill P, Ahmed M, Martin J, Perrett J, Wynne B (2009) The use of bobbin tools for friction
stir welding of aluminum alloys. In: Chandra T, Wanderka N, Reimers W, Ionescu M (eds)
Thermec 2009 Berlin, Materials Science Forum, vol 638–642. Trans. Tech. Publications, pp
1179–1184
38. Mishra R, Ma Z (2005) Friction stir welding and processing. Mater Sci Eng R: Rep 50(1–2):1–
78
39. Wang F, Li W, Shen J, Zhang Z, Li J, dos Santos J (2016) Global and local mechanical properties
and microstructure of Bobbin tool friction-stir-welded Al–Li alloy Global and local mechanical
properties and microstructure of Bobbin tool friction-stir-welded Al–Li alloy. Sci Technol Weld
Join 21(6):479–483
40. Goetze P, Kopy M, Hamilton C, Dymek S (2019) Comparison of dissimilar aluminum alloys
joined by friction stir welding with conventional and Bobbin tools. In: Hovanski Y, Mishra R,
Sato Y, Upadhyay P, Yan D (eds) Friction stir welding and processing X, The Minerals, Metals
& Materials Series. Springer, pp 3–12
41. Liu Z, Ji S, Meng X (2018) Improving joint formation and tensile properties of dissimilar
friction stir welding of aluminum and magnesium alloys by solving the pin adhesion problem.
J Mater Eng Perform 27(3):1404–1413
H. H. Jadav et al.
28. Cao R, Wen B, Chen J, Wang P (2013) Cold Metal Transfer joining of magnesium AZ31B-toaluminum A6061-T6. Mater Sci Eng, A 560:256–266
29. Mehta K, Patel R, Vyas H, Memon S, Vilaça P (2020) Repairing of exit-hole in dissimilar
Al-Mg friction stir welding: process and microstructural pattern. Manuf Lett 23:67–70
30. Kumar U, Acharya U, Saha S, Roy B (2020) Microstructure and mechanical property of friction
stir welded Al-Mg joints by adopting modified joint configuration technique. Mater Today Proc
26:2083–2088
31. Kumar S, Wu C (2020) Suppression of intermetallic reaction layer by ultrasonic assistance
during friction stir welding of Al and Mg based alloys. J Alloy Compd 827:154343
32. Mehta K, Carlone P, Astarita A, Scherillo F, Rubino F, Vora P (2019) Conventional and cooling
assisted friction stir welding of AA6061 and AZ31B alloys. Mater Sci Eng, A 759:252–261
33. Li G, Zhou L, Luo S, Huang Y, Guo N, Zhao H (2019) Effect of self-reacting friction stir welding
on microstructure and mechanical properties of Mg-Al-Zn alloy joints. J Manuf Processes
37:1–10
34. Esmaily M, Mortazavi N, Osikowicz W, Hindsefelt H, Svensson J, Halvarsson M, Thompson
G, Johansson L (2016) Corrosion behaviour of friction stir-welded AA6005-T6 using a bobbin
tool. Corros Sci 111:98–109
35. Avettand-Fènoël M, Taillard R (2016) Effect of a pre or postweld heat treatment on
microstructure and mechanical properties of an AA2050 weld obtained by SSFSW. Mater
Des 89:348–361
36. Christensen A (2018) The feasibility of augmenting a fixed-gap Bobbin friction stir welding
tool with cutters to join enclosed castings tool with cutters to join enclosed castings. All Theses
and Dissertations
37. Threadgill P, Ahmed M, Martin J, Perrett J, Wynne B (2009) The use of bobbin tools for friction
stir welding of aluminum alloys. In: Chandra T, Wanderka N, Reimers W, Ionescu M (eds)
Thermec 2009 Berlin, Materials Science Forum, vol 638–642. Trans. Tech. Publications, pp
1179–1184
38. Mishra R, Ma Z (2005) Friction stir welding and processing. Mater Sci Eng R: Rep 50(1–2):1–
78
39. Wang F, Li W, Shen J, Zhang Z, Li J, dos Santos J (2016) Global and local mechanical properties
and microstructure of Bobbin tool friction-stir-welded Al–Li alloy Global and local mechanical
properties and microstructure of Bobbin tool friction-stir-welded Al–Li alloy. Sci Technol Weld
Join 21(6):479–483
40. Goetze P, Kopy M, Hamilton C, Dymek S (2019) Comparison of dissimilar aluminum alloys
joined by friction stir welding with conventional and Bobbin tools. In: Hovanski Y, Mishra R,
Sato Y, Upadhyay P, Yan D (eds) Friction stir welding and processing X, The Minerals, Metals
& Materials Series. Springer, pp 3–12
41. Liu Z, Ji S, Meng X (2018) Improving joint formation and tensile properties of dissimilar
friction stir welding of aluminum and magnesium alloys by solving the pin adhesion problem.
J Mater Eng Perform 27(3):1404–1413