5
observed to be ~210% at low strain rates up to 0.01 s
−1
and reduced to ~110% at high strain rates above 100 s
−1
, leaving a
drastic change within the intermediate strain rate range.
Acknowledgments Sandia National Laboratories is a multimission laboratory managed and operated by National Technology and Engineering
Solutions of Sandia, LLC, a wholly owned subsidiary of Honeywell International, Inc., for the U.S. Department of Energy’s National Nuclear
Security Administration under contract DE-NA0003525. The views expressed in this chapter do not necessarily represent the views of the
U.S. Department of Energy or the United States Government.
References
1. Korbonski, J.A., Murr, L.E.: Effects of plastic strain and strain rates on the mechanical properties and thermal recovery of type 304 stainless
steel. Metals Eng. Quart. 11, 47–48 (1971)
2. Steichen, J.M.: Effect of irradiation on the strain rate dependence of type 304 stainless-steel mechanical properties. Nucl. Technol. 16,
308–315 (1972)
3. Cadoni, E., Fenu, L., Forni, D.: Strain rate behavior in tension of austenitic stainless steel used for reinforcing bars. Constr. Build. Mater. 35,
399–407 (2012)
4. ASTM: Standard Test Methods for Tension Testing of Metallic Materials. ASTM Standard E8/E8M-09 (2009)
5. Song, B., Sanborn, B., Heister, J., Everett, R., Martinez, T., Groves, G., Johnson, E., Kenney, D., Knight, M., Spletzer, M., Haulenbeek,
K., McConnell, C.: An apparatus for tensile characterization of materials within the upper intermediate strain rate regime. Exp. Mech. 59,
941–951 (2019)
6. Nie, X., Song, B., Loeffler, C.M.: A novel splitting-beam laser extensometer technique for Kolsky tension bar experiment. J. Dyn. Behav.
Mater. 1, 70–74 (2015)
7. Song, B., Sanborn, B., Susan, D., Johnson, K., Dabling, J., Carroll, J., Brink, A., Grutzik, S., Kustas, A.: Correction of specimen strain measurement in Kolsky tension bar experiments on work-hardening materials. Int. J. Impact Eng. 132, 103328 (2019)
8. Song, B., Antoun, B.R., Jin, H.: Dynamic tensile characterization of a 4330-V steel. Exp. Mech. 53, 1519–1529 (2013)
9. Sanborn, B., Song, B., Thompson, A., Reece, B., Attaway, S.: High strain rate tensile response of A572 and 4140 steel. Proc. Eng. 197,
33–41 (2017)
1 Mechanical Characterization of 304L-VAR Stainless Steel in Tension with a Full Coverage from Low, Intermediate…
observed to be ~210% at low strain rates up to 0.01 s
−1
and reduced to ~110% at high strain rates above 100 s
−1
, leaving a
drastic change within the intermediate strain rate range.
Acknowledgments Sandia National Laboratories is a multimission laboratory managed and operated by National Technology and Engineering
Solutions of Sandia, LLC, a wholly owned subsidiary of Honeywell International, Inc., for the U.S. Department of Energy’s National Nuclear
Security Administration under contract DE-NA0003525. The views expressed in this chapter do not necessarily represent the views of the
U.S. Department of Energy or the United States Government.
References
1. Korbonski, J.A., Murr, L.E.: Effects of plastic strain and strain rates on the mechanical properties and thermal recovery of type 304 stainless
steel. Metals Eng. Quart. 11, 47–48 (1971)
2. Steichen, J.M.: Effect of irradiation on the strain rate dependence of type 304 stainless-steel mechanical properties. Nucl. Technol. 16,
308–315 (1972)
3. Cadoni, E., Fenu, L., Forni, D.: Strain rate behavior in tension of austenitic stainless steel used for reinforcing bars. Constr. Build. Mater. 35,
399–407 (2012)
4. ASTM: Standard Test Methods for Tension Testing of Metallic Materials. ASTM Standard E8/E8M-09 (2009)
5. Song, B., Sanborn, B., Heister, J., Everett, R., Martinez, T., Groves, G., Johnson, E., Kenney, D., Knight, M., Spletzer, M., Haulenbeek,
K., McConnell, C.: An apparatus for tensile characterization of materials within the upper intermediate strain rate regime. Exp. Mech. 59,
941–951 (2019)
6. Nie, X., Song, B., Loeffler, C.M.: A novel splitting-beam laser extensometer technique for Kolsky tension bar experiment. J. Dyn. Behav.
Mater. 1, 70–74 (2015)
7. Song, B., Sanborn, B., Susan, D., Johnson, K., Dabling, J., Carroll, J., Brink, A., Grutzik, S., Kustas, A.: Correction of specimen strain measurement in Kolsky tension bar experiments on work-hardening materials. Int. J. Impact Eng. 132, 103328 (2019)
8. Song, B., Antoun, B.R., Jin, H.: Dynamic tensile characterization of a 4330-V steel. Exp. Mech. 53, 1519–1529 (2013)
9. Sanborn, B., Song, B., Thompson, A., Reece, B., Attaway, S.: High strain rate tensile response of A572 and 4140 steel. Proc. Eng. 197,
33–41 (2017)
1 Mechanical Characterization of 304L-VAR Stainless Steel in Tension with a Full Coverage from Low, Intermediate…