zone at depth on the Parkfield, California, segment
of the San Andreas fault. Journal of Geophysical
Research 92(B8): 7945–62.
Harris, R. A. and Simpson, R. W., 1998, Suppression of
large earthquakes by stress shadows: a comparison
of Coulomb and rate-and-state failure. Journal of
Geophysical Research 103: 24 439–51.
Haskell, N. H., 1937, The viscosity of the aesthenosphere. American Journal of Science 33: 22–8.
Hausman, D. M., 1998, Causal Asymmetries. Cambridge:
Cambridge University Press.
Head, J. W., Crumpler, L. S., Aubele, J. C., Guest, J. E., and
Saunders, R. S., 1992, Venus volcanism: classification
of volcanic features and structures, associations, and
global distributions from Magellan data. Journal of
Geophysical Research 97: 13 153–97.
Heard, H. C., 1960, Transition from brittle fracture to
ductile flow in Solenhofen limestone as a function
of temperature, confining pressure, and interstitial
fluid pressure. In D. T. Griggs and J. Handin, eds.,
Rock Deformation. Boulder, CO: Geological Society of
America, pp. 193–226.
Hearmon, R. F. S., 1961, An Introduction to Applied
Anisotropic Elasticity. Oxford: Oxford University Press.
Herget, G., 1993, Rock stresses and rock stress monitoring in Canada. In J. A. Hudson, ed., Rock Testing and
Site Characterization: Comprehensive Rock Engineering.
Oxford: Pergamon Press, pp. 473–96.
Hill, R., 1965, A self-consistent mechanics of composite
materials. Journal of the Mechanics and Physics of Solids
13: 213–22.
Hillerman, T., 1990, Coyote Waits. New York: Harper and
Row.
Hilley, G. E. and Strecker, M. R., 2004, Steady-state
erosion of critical Coulomb wedges with applications to Taiwan and the Himalaya. Journal of
Geophysical Research 109: doi:10.1029/2002JB002284.
Hilley, G. E., Strecker, M. R., and Ramos, V. A., 2004,
Growth and erosion of fold-and-thrust belts, with an
application to the Aconcagua Fold-and-Thrust Belt,
Argentina. Journal of Geophysical Research 109:
doi:10.1029/2002JB002282.
Hirth, J. P. and Lothe, J., 1982, Theory of Dislocations. New
York: John Wiley and Sons.
Hoagland, R. G., Hahn, G. T., and Rosenfield, A. R., 1973,
Influence of microstructure on fracture propagation
in rock. Rock Mechanics 5: 77–106.
Hobbs, D. W., 1962, The strength of coal under biaxial
compression. Colliery Engineering 39: 285–90.
Hodgson, R. A., 1961, Classification of structures on
joint surfaces. American Journal of Science 259:
493–502.
Hoek, E., 1965, Rock Fracture Under Static Stress Conditions.
Pretoria: Natural Mechanical Engineering Research
Institute, CSIR.
Hoek, E. and Bieniawski, Z. T., 1965, Brittle fracture
propagation in rock under compression. International
Journal of Fracture Mechanics 1: 137–55.
Hofmann-Wellenhof, B., Lichtenegger, H., and Collins,
J., 1997, Global Positioning System. New York: SpringerVerlag.
Hoshino, K., Koide, H., Inami, K., Iwamura, S., and
Mitsui, S., 1972, Mechanical Properties of Japanese Tertiary
Sedimentary Rocks Under High Confining Pressures, Report
244. Kawasaki: Geological Survey of Japan.
Hossain, K. M., 1979, Determination of strain from
stretched belemnites. Tectonophysics 60: 279–88.
Howarth, R. J., 1999, Measurement, portrayal and
analysis of orientation data and the origins of early
modern structural geology (1670–1967). Proceedings of
the Geologists’ Association 110: 273–309.
Hubbert, M. K., 1937, Theory of scale models as applied
to the study of geologic structures. Geological Society
of America Bulletin 48: 1459–520.
Hubbert, M. K., 1945, Strength of the Earth. American
Association of Petroleum Geologists Bulletin 29: 1630–53.
Hubbert, M. K., 1951, Mechanical basis for certain
familiar geologic structures. Geological Society of
America Bulletin 62: 355–72.
Hubbert, M. K., 1972, Structural Geology. New York:
Hafner.
Hubbert, M. K., 1974, Is being quantitative sufficient?
In D. F. Merriam, ed., The Impact of Quantification on
Geology. Syracuse, NY: Syracuse University, pp. 27–49.
Hubbert, M. K. and Willis, D. G., 1957, Mechanics of
hydraulic fracturing. Petroleum, Transactions AIME 210:
153–66.
Hudleston, P. J., 1973, Fold morphology and some geometrical implications of theories of fold development. Tectonophysics 16(1–2): 1–46.
Hudleston, P. J., 1992, A comparison between glacial
movement and thrust sheet or nappe emplacement
and associated structures. In S. Mitra and G. W.
Fisher, eds., Structural Geology of Fold and Thrust Belts.
Baltimore, MD: The Johns Hopkins University Press,
pp. 81–91.
Hudson, J. A., Crouch, S. L., and Fairhurst, C., 1972,
Soft, stiff and servo-controlled testing machines: a
review with reference to rock failure. Engineering
Geology 6: 155–9.
Hughes, T. J. R., 1987, The Finite Element Method.
Englewood Cliffs, NJ: Prentice-Hall.
Hunt, C. B., 1953, Geology and Geography of the Henry
Mountains Region, Utah, US Geological Survey Professional
Paper. Washington, DC: US Government Printing
Office.
REFERENCES
485
of the San Andreas fault. Journal of Geophysical
Research 92(B8): 7945–62.
Harris, R. A. and Simpson, R. W., 1998, Suppression of
large earthquakes by stress shadows: a comparison
of Coulomb and rate-and-state failure. Journal of
Geophysical Research 103: 24 439–51.
Haskell, N. H., 1937, The viscosity of the aesthenosphere. American Journal of Science 33: 22–8.
Hausman, D. M., 1998, Causal Asymmetries. Cambridge:
Cambridge University Press.
Head, J. W., Crumpler, L. S., Aubele, J. C., Guest, J. E., and
Saunders, R. S., 1992, Venus volcanism: classification
of volcanic features and structures, associations, and
global distributions from Magellan data. Journal of
Geophysical Research 97: 13 153–97.
Heard, H. C., 1960, Transition from brittle fracture to
ductile flow in Solenhofen limestone as a function
of temperature, confining pressure, and interstitial
fluid pressure. In D. T. Griggs and J. Handin, eds.,
Rock Deformation. Boulder, CO: Geological Society of
America, pp. 193–226.
Hearmon, R. F. S., 1961, An Introduction to Applied
Anisotropic Elasticity. Oxford: Oxford University Press.
Herget, G., 1993, Rock stresses and rock stress monitoring in Canada. In J. A. Hudson, ed., Rock Testing and
Site Characterization: Comprehensive Rock Engineering.
Oxford: Pergamon Press, pp. 473–96.
Hill, R., 1965, A self-consistent mechanics of composite
materials. Journal of the Mechanics and Physics of Solids
13: 213–22.
Hillerman, T., 1990, Coyote Waits. New York: Harper and
Row.
Hilley, G. E. and Strecker, M. R., 2004, Steady-state
erosion of critical Coulomb wedges with applications to Taiwan and the Himalaya. Journal of
Geophysical Research 109: doi:10.1029/2002JB002284.
Hilley, G. E., Strecker, M. R., and Ramos, V. A., 2004,
Growth and erosion of fold-and-thrust belts, with an
application to the Aconcagua Fold-and-Thrust Belt,
Argentina. Journal of Geophysical Research 109:
doi:10.1029/2002JB002282.
Hirth, J. P. and Lothe, J., 1982, Theory of Dislocations. New
York: John Wiley and Sons.
Hoagland, R. G., Hahn, G. T., and Rosenfield, A. R., 1973,
Influence of microstructure on fracture propagation
in rock. Rock Mechanics 5: 77–106.
Hobbs, D. W., 1962, The strength of coal under biaxial
compression. Colliery Engineering 39: 285–90.
Hodgson, R. A., 1961, Classification of structures on
joint surfaces. American Journal of Science 259:
493–502.
Hoek, E., 1965, Rock Fracture Under Static Stress Conditions.
Pretoria: Natural Mechanical Engineering Research
Institute, CSIR.
Hoek, E. and Bieniawski, Z. T., 1965, Brittle fracture
propagation in rock under compression. International
Journal of Fracture Mechanics 1: 137–55.
Hofmann-Wellenhof, B., Lichtenegger, H., and Collins,
J., 1997, Global Positioning System. New York: SpringerVerlag.
Hoshino, K., Koide, H., Inami, K., Iwamura, S., and
Mitsui, S., 1972, Mechanical Properties of Japanese Tertiary
Sedimentary Rocks Under High Confining Pressures, Report
244. Kawasaki: Geological Survey of Japan.
Hossain, K. M., 1979, Determination of strain from
stretched belemnites. Tectonophysics 60: 279–88.
Howarth, R. J., 1999, Measurement, portrayal and
analysis of orientation data and the origins of early
modern structural geology (1670–1967). Proceedings of
the Geologists’ Association 110: 273–309.
Hubbert, M. K., 1937, Theory of scale models as applied
to the study of geologic structures. Geological Society
of America Bulletin 48: 1459–520.
Hubbert, M. K., 1945, Strength of the Earth. American
Association of Petroleum Geologists Bulletin 29: 1630–53.
Hubbert, M. K., 1951, Mechanical basis for certain
familiar geologic structures. Geological Society of
America Bulletin 62: 355–72.
Hubbert, M. K., 1972, Structural Geology. New York:
Hafner.
Hubbert, M. K., 1974, Is being quantitative sufficient?
In D. F. Merriam, ed., The Impact of Quantification on
Geology. Syracuse, NY: Syracuse University, pp. 27–49.
Hubbert, M. K. and Willis, D. G., 1957, Mechanics of
hydraulic fracturing. Petroleum, Transactions AIME 210:
153–66.
Hudleston, P. J., 1973, Fold morphology and some geometrical implications of theories of fold development. Tectonophysics 16(1–2): 1–46.
Hudleston, P. J., 1992, A comparison between glacial
movement and thrust sheet or nappe emplacement
and associated structures. In S. Mitra and G. W.
Fisher, eds., Structural Geology of Fold and Thrust Belts.
Baltimore, MD: The Johns Hopkins University Press,
pp. 81–91.
Hudson, J. A., Crouch, S. L., and Fairhurst, C., 1972,
Soft, stiff and servo-controlled testing machines: a
review with reference to rock failure. Engineering
Geology 6: 155–9.
Hughes, T. J. R., 1987, The Finite Element Method.
Englewood Cliffs, NJ: Prentice-Hall.
Hunt, C. B., 1953, Geology and Geography of the Henry
Mountains Region, Utah, US Geological Survey Professional
Paper. Washington, DC: US Government Printing
Office.
REFERENCES
485