Experience of Swachh Bharat Mission with Focus on Swachh …
119
Fig. 4 Assembling of parts
From the data saved in CHINO data logger, the graph was plotted between the
temperature of both traditional stove and the energy-efficient stove (Figs. 7 and 8).
8 Thermal Imaging
The thermal imaging of the material used for the construction of stove has been
tested. The main material that has been used for the construction of energy-efficient
stove is tile. In order to find out its withstanding capability of temperature of the
tile, it was placed inside the muffle furnace at the temperature approximately above
1000 °C and it was allowed to be inside the furnace until the furnace temperature
reaches 1000 °C, then it was suddenly dipped into the cold water to find out does it
breaks or not. As a result, there was no breakage of tile and only the color is faded
somewhat (Bharadwaj and Kumudha 2017; Panwar 2009). Then, this test was done
more than thrice in an interval of one day each. Then finally after letting the tile to
119
Fig. 4 Assembling of parts
From the data saved in CHINO data logger, the graph was plotted between the
temperature of both traditional stove and the energy-efficient stove (Figs. 7 and 8).
8 Thermal Imaging
The thermal imaging of the material used for the construction of stove has been
tested. The main material that has been used for the construction of energy-efficient
stove is tile. In order to find out its withstanding capability of temperature of the
tile, it was placed inside the muffle furnace at the temperature approximately above
1000 °C and it was allowed to be inside the furnace until the furnace temperature
reaches 1000 °C, then it was suddenly dipped into the cold water to find out does it
breaks or not. As a result, there was no breakage of tile and only the color is faded
somewhat (Bharadwaj and Kumudha 2017; Panwar 2009). Then, this test was done
more than thrice in an interval of one day each. Then finally after letting the tile to